Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

2Rx XR UE

Two Antenna Port Extended Reality User Equipment

Radio Access Network →

2Rx XR UE is a UE category defined in TS 38.101-1 for Extended Reality devices with two receive antenna ports, defining the RF and performance baseline for XR-capable devices in NR networks.

Introduced
Rel-18
Where
Radio Access Network › NG-RAN (5G)
Specifications
3 specs
2Rx XR UE Description Purpose What changed Neighbours Detected Changes Specifications

Description

The 2Rx XR UE (Two Receive Antenna Port Extended Reality User Equipment) is a UE classification introduced in 3GPP Release 18 to define the radio frequency (RF) and performance requirements for Extended Reality devices that support two receive antenna ports. XR encompasses Augmented Reality (AR), Virtual Reality (VR), and Mixed Reality (MR) applications, which impose demanding requirements on the radio link in terms of throughput, latency, and reliability. The 2Rx designation indicates that the device is equipped with two receive antenna ports, which enables receive diversity and improves the link budget compared to single-antenna devices.

The term is referenced in TS 38.300 (NR overall description), TS 38.304 (UE procedures in idle mode and RRC inactive state), and TS 38.331 (RRC protocol specification). The RF requirements for the 2Rx XR UE are specified in TS 38.101-1, which defines the minimum performance requirements for NR user equipment. By defining a specific UE category for XR devices with two receive antennas, 3GPP enables network operators and device manufacturers to align on a common performance baseline, ensuring that XR applications can be delivered with adequate quality of experience.

From an architectural perspective, the 2Rx XR UE operates within the NR Radio Access Network (NG-RAN), connecting to gNodeB (gNB) base stations. The two receive antenna ports allow the UE to benefit from receive diversity techniques, which improve the signal-to-noise ratio (SNR) and mitigate the effects of fading and interference. This is particularly important for XR applications, which typically require high data rates (e.g., for video streaming) and low latency (e.g., for motion tracking and interactive feedback). The UE category also influences how the network configures radio resources, including MIMO layers, beamforming, and scheduling decisions.

The introduction of the 2Rx XR UE category reflects the growing importance of XR as a use case for 5G networks. XR devices, such as AR glasses and VR headsets, often have constrained form factors, which limits the number of antennas they can support. By defining a 2Rx baseline, 3GPP acknowledges that many XR devices will operate with two receive antennas, and it provides a framework for optimizing network performance for these devices. This includes considerations for power consumption, thermal constraints, and the need for efficient spectrum utilization.

In terms of network operation, the 2Rx XR UE category affects how the gNB performs link adaptation, beam management, and mobility procedures. For example, the network may use the UE's antenna configuration to determine the appropriate MIMO transmission scheme, such as transmit diversity or spatial multiplexing. The category also informs the design of XR-specific features, such as capacity enhancements for XR traffic and power saving mechanisms for XR devices. Overall, the 2Rx XR UE represents a key building block in the 3GPP framework for supporting XR services over 5G networks.

Purpose & Motivation

The 2Rx XR UE category was created to address the specific needs of Extended Reality devices operating over 5G NR networks. XR applications, including AR, VR, and MR, require high throughput, low latency, and high reliability, which place stringent demands on the radio link. Many XR devices, such as lightweight AR glasses and compact VR headsets, are constrained in size and power, limiting the number of antennas they can support. By defining a two-antenna-port baseline, 3GPP provides a clear performance target for device manufacturers and network operators, ensuring that XR devices can achieve adequate link quality without requiring excessive antenna complexity.

Prior to Release 18, 3GPP specifications did not include a dedicated UE category for XR devices. This meant that XR devices were often treated as generic UEs, which could lead to suboptimal network configuration and inconsistent user experience. The introduction of the 2Rx XR UE category allows the network to optimize radio resource management, beamforming, and scheduling for XR traffic, while also enabling device manufacturers to design products that meet specific RF performance requirements. This is particularly important for ensuring interoperability and consistent quality of service across different vendors and networks.

The 2Rx XR UE category also supports the broader 3GPP goal of enabling immersive communication services. By providing a standardized framework for XR device performance, 3GPP facilitates the development of a vibrant ecosystem of XR devices and applications, which is expected to drive the adoption of 5G networks and create new revenue opportunities for operators. The category is part of a larger set of XR-related enhancements in Release 18 and beyond, including capacity improvements, power saving features, and latency reductions, all aimed at delivering a superior XR experience over 5G.

What changed in its specifications

The latest release-to-release comparison of specifications that define 2Rx XR UE. Each summary describes the whole specification, not only this term.

TS 38.300Rel-18 → Rel-19

Rel-19 adds multi-hop L2 UE-to-Network relay for NR sidelink as the largest item. It also adds low-power wake-up signal and receiver (LP-WUS/WUR) text, on-demand SSB and SIB1 for network energy savings, and sub-band full duplex for TDD carriers.

Full comparison in TS 38.300 →
TS 38.304Rel-18 → Rel-19

Rel-19 adds TS 38.304 definitions for multi-hop L2 UE-to-Network sidelink relay roles, including child, parent, intermediate, first and last relay UEs. It also adds paging and system information handling for relays, and NTN IoT Phase 3 text on PLMN access technology restrictions and cell categories.

Full comparison in TS 38.304 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (4 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-18 4 changes
  • Introduction of new SPID value for 2RX XR UE [2Rx_XR_Device] TS 38.300CR0824
  • Introduction of 2Rx XR UE [2Rx_XR_Device] TS 38.331CR4572
  • Correction on cell status for 2Rx XR UE [2Rx_XR_Device] TS 38.304CR0408
  • Correction for cell barring for 2Rx XR UE [2Rx_XR_Device] TS 38.331CR4851

Defining Specifications

3GPP specifications that define or reference 2Rx XR UE, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.300 vj40 NR and NG-RAN Overall Description Rel-19 read
TS 38.304 vj30 NR UE Idle and Inactive State Procedures Rel-19 read
TS 38.331 vj40 NR Radio Resource Control (RRC) Rel-19 read