Description
3GPP Femto refers to the femtocell network elements defined by 3GPP, specifically the Home NodeB (HNB) for UMTS and the Home eNodeB (HeNB) for LTE. These are small, low-power base stations designed to provide localized radio coverage in residential, enterprise, or hotspot environments. The term is defined in 3GPP specifications TS 23.139 (3GPP system-fixed broadband access interworking) and TS 23.839 (Study on 3GPP system-fixed broadband access interworking). The HNB and HeNB are connected to the mobile core network through a gateway: the HNB Gateway (HNB GW) is always required for the HNB architecture, while the HeNB Gateway (HeNB GW) is optional for the HeNB architecture.
In the HNB architecture, the HNB provides UMTS radio coverage and connects to the HNB GW via the Iuh interface. The HNB GW acts as a concentrator, aggregating traffic from multiple HNBs and providing a single interface to the core network's Serving GPRS Support Node (SGSN) and Mobile Switching Center (MSC). This architecture simplifies the core network by hiding the large number of HNBs from the core nodes. The HNB GW also handles functions such as registration, paging, and mobility management for the HNBs. The HNB itself is typically a consumer-grade device that can be installed by the user, and it may support features such as closed subscriber group (CSG) access control.
For the HeNB architecture in LTE, the HeNB provides LTE radio coverage and connects to the Evolved Packet Core (EPC) via the S1 interface. The HeNB GW is an optional element that can be deployed to aggregate traffic from multiple HeNBs, similar to the HNB GW. When the HeNB GW is not deployed, the HeNB connects directly to the Mobility Management Entity (MME) and Serving Gateway (SGW). The HeNB GW provides scalability and simplifies the core network by reducing the number of S1 interfaces. The HeNB also supports features such as CSG, local IP access (LIPA), and selected IP traffic offload (SIPTO), which allow traffic to be offloaded to the local network or the internet.
The 3GPP Femto concept addresses the need for improved indoor coverage and capacity. Traditional macro cells often struggle to provide adequate signal strength inside buildings due to penetration losses. Femtocells solve this by placing a small base station close to the user, resulting in better signal quality, higher data rates, and reduced power consumption for user devices. They also offload traffic from the macro network, reducing congestion and improving overall network efficiency. The integration with the core network ensures that users experience seamless mobility and consistent services when moving between femtocells and macro cells.
From a standardization perspective, 3GPP has defined the architecture, interfaces, and procedures for femtocells in various releases. The HNB and HeNB are specified in TS 23.139 and TS 23.839, which cover the interworking with fixed broadband access networks. These specifications ensure that femtocells can be deployed using existing broadband connections (e.g., DSL or fiber) and that they interoperate with the mobile core network. The femtocell architecture also includes security mechanisms, such as IPsec, to protect the communication between the femtocell and the gateway. Overall, 3GPP Femto represents a key enabler for small cell deployments and is a precursor to the more advanced small cell and heterogeneous network features in later releases.
Purpose & Motivation
The 3GPP Femto concept was created to address the challenge of providing reliable indoor coverage and capacity in mobile networks. Macro cellular networks often suffer from poor signal penetration inside buildings, leading to dropped calls, low data rates, and poor user experience. Femtocells solve this by deploying small, low-power base stations in homes and businesses, bringing the network closer to the user. This improves coverage, increases capacity, and reduces the load on the macro network. The concept also enables operators to offer new services, such as fixed-mobile convergence and local IP access.
Prior to the standardization of femtocells, indoor coverage was typically addressed through repeaters or distributed antenna systems (DAS), which were costly and complex to deploy. Femtocells offer a more scalable and cost-effective solution, as they can be installed by end users and leverage existing broadband connections for backhaul. The 3GPP standardization ensures that femtocells interoperate with the mobile core network and support seamless mobility, which is essential for a good user experience. The distinction between HNB and HeNB reflects the evolution from UMTS to LTE, with the HNB GW being mandatory for HNB and the HeNB GW being optional for HeNB, providing flexibility in deployment.
The 3GPP Femto specifications also address security and access control. Femtocells can be configured as closed subscriber groups (CSG), allowing only authorized users to access them. This is important for residential deployments where the owner wants to restrict access. The specifications define the security mechanisms, such as IPsec, to protect the backhaul connection and ensure that the femtocell cannot be compromised. Overall, 3GPP Femto has played a crucial role in the evolution of mobile networks towards densification and heterogeneous deployments, paving the way for 5G small cells and network slicing.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Initial definition introduced: 'Refers to the HNB and HeNB NEs as defined by 3GPP. The HNB GW is always required for the HNB architecture while the HeNB GW is option for the HeNB.' This established the baseline architecture for femtocells in 3GPP, distinguishing between UMTS HNB and LTE HeNB deployments.
Defining Specifications
3GPP specifications that define or reference 3GPP Femto, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 23.139 vj00 | 3GPP-Fixed Broadband Interworking Stage 2 | Rel-19 read |
| TS 23.839 vc00 | BBF Access Interworking Architecture Study | Rel-12 read |