Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

3Tx

3 Transmit Chains

Radio Access Network →

3Tx is a UE capability for carrier aggregation or EN-DC in which the UE transmits using one Tx chain on one band and two Tx chains on another band, improving uplink throughput and coverage.

Introduced
Rel-18
Where
User Equipment
Specifications
2 specs
3Tx Description Purpose Neighbours Specifications

Description

3Tx (3 Transmit Chains) is a UE capability defined in 3GPP specifications for carrier aggregation (CA) and E-UTRAN New Radio Dual Connectivity (EN-DC) band combinations. It refers to a UE that can transmit simultaneously using three transmit chains: one Tx chain on one band and two Tx chains on another band. This capability enhances uplink performance by enabling higher-order MIMO or diversity on one band while maintaining a single stream on the other, or by supporting uplink carrier aggregation with multiple layers.

In the context of CA, the UE can aggregate multiple component carriers (CCs) across different bands. With 3Tx, the UE can use two transmit chains on one band (e.g., for 2x2 MIMO or uplink spatial multiplexing) and one transmit chain on another band, allowing simultaneous transmission on both bands. This is particularly beneficial for improving uplink coverage and throughput, especially in scenarios where the uplink is the bottleneck. In EN-DC, the UE connects to both an LTE eNB and an NR gNB, and 3Tx allows for flexible allocation of transmit chains across the LTE and NR bands.

The 3Tx capability is specified in 3GPP TS 38.792 (UE capabilities for EN-DC) and TS 38.880 (UE capabilities for NR CA). These specifications define the band combinations and the exact transmit chain configurations supported. The UE reports its 3Tx capability to the network during capability signaling, and the network can then configure the appropriate uplink transmission scheme.

The implementation of 3Tx requires the UE to have multiple power amplifiers and antennas, which increases complexity and cost. However, it provides significant benefits in terms of uplink performance, especially for users at the cell edge or in high-traffic areas. The feature is part of the evolution of LTE and NR to support higher data rates and better coverage.

3Tx is a key capability for 5G UEs, enabling them to fully exploit the available spectrum and achieve uplink speeds comparable to downlink in some cases. It is particularly relevant for applications with symmetric traffic patterns, such as video conferencing and cloud gaming.

Purpose & Motivation

3Tx was introduced to address the growing demand for higher uplink throughput and better coverage in mobile networks. As downlink speeds increased with advanced MIMO and carrier aggregation, the uplink often became the bottleneck, especially for applications like video uploads, cloud storage, and real-time interactive services. Traditional UEs with only two transmit chains (2Tx) could not fully utilize the available uplink spectrum when aggregating multiple bands.

The 3Tx capability allows UEs to transmit on two bands simultaneously with a total of three transmit chains, enabling higher uplink data rates and improved coverage. It also provides flexibility in allocating transmit chains to different bands based on channel conditions and traffic demands. This is particularly important in EN-DC and CA scenarios where multiple bands are used.

Before 3Tx, UEs were limited to 2Tx, which restricted uplink MIMO to 2 layers and limited the ability to aggregate uplink carriers. 3Tx enables 3 layers of uplink MIMO or a combination of 2 layers on one band and 1 layer on another, pushing the uplink performance envelope. The standardization of 3Tx in Rel-18 and Rel-19 ensures that networks and UEs can interoperate and deliver enhanced uplink experiences.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-18 Initial

Initial definition introduced 3Tx as a UE transmit capability with one Tx chain on one band and two Tx chains on the other band in CA or EN-DC band combinations.

The definition remained unchanged from Rel-18, continuing to specify the same transmit chain configuration.

Defining Specifications

3GPP specifications that define or reference 3Tx, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.792 vj00 UE RF Requirements for PC1.5 Inter-band UL CA/DC Rel-19 read
TR 38.880 vi00 Technical Report for 3Tx inter-band UL CA and EN-DC Rel-18 read