Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Access technology

Access Technology (Radio Access Technology of the Terminal)

Radio Access Network →

Access technology is the radio access technology used by a terminal, such as NG-RAN, E-UTRAN, UTRAN, or GSM, identifying the generation and family of radio interface and driving test and configuration procedures.

Introduced
Rel-12
Where
Testing
Specifications
2 specs
Access technology Description Purpose What changed Neighbours Detected Changes Specifications

Description

Access Technology, as defined in 3GPP specifications TS 31.121 (UICC terminal interface conformance testing) and TS 31.829 (UICC application test specification), refers to the Radio Access Technology of the Terminal. It identifies the family of radio interface through which the terminal communicates with the network. The definition enumerates examples: NG-RAN (5G New Radio), E-UTRAN (LTE), UTRAN (UMTS), and GSM (2G). Each of these represents a distinct radio access technology with its own physical layer, protocol stack, and set of capabilities.

The concept is used primarily in the context of the UICC (Universal Integrated Circuit Card) and its interaction with the terminal. The UICC hosts the Universal Subscriber Identity Module (USIM) and other applications that store subscriber credentials and network-related parameters. The terminal must inform the UICC, or behave consistently with respect to the UICC, depending on which access technology it is currently using. For example, certain files and parameters on the UICC are only relevant for specific access technologies, and the terminal's behavior in reading, updating, and interpreting these files depends on the access technology in use. Conformance test specifications such as TS 31.121 and TS 31.829 define test cases that verify the terminal behaves correctly for each access technology.

Access Technology is also relevant to network selection and to the terminal's capability reporting. A multi-mode terminal may support several access technologies and may move between them depending on coverage, operator policy, and user preference. The access technology in use at any given moment determines which radio protocols are active, which core network the terminal attaches to (for example, the 5G core via NG-RAN, the EPC via E-UTRAN, or legacy core networks via UTRAN or GSM), and which services are available. In this sense, the access technology is a key input to the terminal's overall operational context.

In the UICC test specifications, the access technology is used to structure test procedures. Different test cases apply depending on whether the terminal is operating in NG-RAN, E-UTRAN, UTRAN, or GSM mode, because the terminal's interaction with the UICC differs across these modes. For instance, the terminal may need to indicate its access technology to the UICC so that the UICC can select the appropriate network parameters, or the terminal may need to handle access-technology-specific files differently. The test specifications ensure that terminals from different vendors behave consistently and correctly in these interactions.

The definition of Access Technology has evolved modestly over time. When first introduced in Rel-12, the examples listed were E-UTRAN, UTRAN, and GSM, reflecting the access technologies in widespread use at the time. NG-RAN was added later, reflecting the introduction and deployment of 5G New Radio. This evolution illustrates how the term is anchored to the concrete set of radio access technologies that 3GPP standardizes, and how it is updated as new generations are added.

Purpose & Motivation

The Access Technology concept exists because terminals and UICCs must coordinate their behavior based on which radio interface is in use. A UICC is a general-purpose secure element that can serve a terminal across multiple access technologies, but the parameters and procedures that apply differ depending on whether the terminal is on a 5G, LTE, UMTS, or GSM network. Without an explicit notion of access technology, the terminal and UICC could not reliably determine which files to read, which parameters to apply, and which procedures to follow.

The concept also supports conformance testing. 3GPP specifications such as TS 31.121 and TS 31.829 define test cases that verify terminal behavior at the UICC interface. These test cases must be organized by access technology because the expected behavior differs across technologies. By defining Access Technology explicitly, the specifications provide a common vocabulary for test designers, terminal vendors, and UICC vendors, ensuring that test coverage is complete and that terminals are validated for each access technology they support.

Finally, the term reflects the multi-mode nature of modern terminals. A single device may support NG-RAN, E-UTRAN, UTRAN, and GSM, and may transition between them during normal operation. Having a clear definition of access technology allows the specifications to describe, unambiguously, which mode the terminal is in and how it should behave, which is essential for interoperability and for the correct operation of services across generations.

What changed in its specifications

The latest release-to-release comparison of specifications that define Access technology. Each summary describes the whole specification, not only this term.

TS 31.121Rel-18 → Rel-19

Rel-19 added harmonized test definitions for FDN, charging, PLMN selection, CSG; RedCap access control tests across EPS, NB-IoT, 5G NR; slice selection conformance clauses; SOR-CMCI test clauses for PDU release; and PLMN selection priority test changes.

Full comparison in TS 31.121 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (2 CRs across 2 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-17 1 change
  • Correction of Access Technology values in EFPLMNwACT for 5G-NR UICC tests TS 31.121CR0550
Rel-18 1 change
  • Correction to Access Technology Identifier in IoT NTN TC TS 31.121CR0584

Defining Specifications

3GPP specifications that define or reference Access technology, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 31.121 vj00 UICC Application Test Specification Rel-19 read
TS 31.829 vd00 ISIM-ME Interface Conformance Requirements Rel-13 read