Description
Active Process, more precisely Active HARQ Process, is a MAC-layer concept defined in TS 25.319 and TS 25.321 for HSPA (HSDPA/HSUPA) and referenced in LTE MAC specifications. A HARQ process is one of several parallel stop-and-wait ARQ instances used to provide reliable transmission with low latency. Each HARQ process has its own sequence number, soft buffer, and retransmission state. An active process is one for which Scheduling Grants are applicable, i.e., the scheduler has authorised the UE to send data on that process, and therefore scheduled data can be sent.
In HSDPA, the downlink scheduler in the NodeB assigns HARQ processes to UEs via the HS-SCCH. The UE monitors the HS-SCCH for grants; when a grant is received for a particular HARQ process, that process becomes active and the UE can receive and decode the corresponding HS-PDSCH transmission. The concept of active process is used to distinguish processes that are currently eligible for scheduling from those that are blocked, for example because they are awaiting retransmission or because the UE has no grant.
In HSUPA, the uplink scheduler in the NodeB controls the UE's transmission via absolute and relative grants on the E-AGCH and E-RGCH. The UE maintains a set of HARQ processes, and the scheduler determines which processes are active by issuing grants. The active process concept ensures that the UE only transmits on processes for which it has been authorised, preventing collisions and managing interference.
The active process concept is closely tied to the scheduling grant mechanism. In HSPA, grants are per-UE and per-process, and the scheduler must track which processes are active to manage the HARQ retransmission timing and the soft buffer. In LTE, the MAC scheduler uses a similar concept: the uplink grant is per-UE and the HARQ process ID is indicated in the PDCCH DCI, so the UE knows which process is active for each transmission.
The term has remained stable since Rel-8, with no substantive changes to the definition across releases. This stability reflects the maturity of the HARQ and scheduling framework, which has been a cornerstone of 3GPP radio access since HSPA. The active process concept is fundamental to understanding how the MAC layer coordinates scheduling, HARQ, and interference management.
Purpose & Motivation
Active Process exists to formalise the relationship between scheduling grants and HARQ processes. In a HARQ-based system, multiple stop-and-wait processes operate in parallel to keep the link busy while retransmissions are pending. However, not all processes are eligible for transmission at any given time: the scheduler must authorise transmissions to manage interference, prioritise users, and respect buffer constraints. The active process concept provides a clear definition of which processes are currently authorised.
Before this concept was formalised, the interaction between grants and HARQ processes was implicit, leading to ambiguity in UE behaviour and scheduler design. By defining an active process as one for which Scheduling Grants are applicable, 3GPP provided a precise basis for UE conformance testing and scheduler implementation.
The concept also supports interference management in HSPA: by controlling which processes are active, the NodeB can regulate the UE's transmit power and timing, which is critical for uplink capacity. In LTE, the same principle applies to the uplink scheduler, which uses grants to control which HARQ processes are active and when retransmissions occur.
What changed in its specifications
The latest release-to-release comparison of specifications that define Active Process. Each summary describes the whole specification, not only this term.
Added two E-DCH interference mitigation sub-features: radio links without DPCH/F-DPCH and serving E-DCH cell decoupling. Also added Implicit Grant handling for Secondary Serving E-DCH cells.
Full comparison in TS 25.319 →Rel-16 brings only minor changes to TS 25.321: 0 clauses changed, with no change attributed to a release feature.
Full comparison in TS 25.321 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference Active Process, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 25.319 vj00 | Enhanced Uplink for UTRA FDD/TDD | Rel-19 read |
| TS 25.321 vj00 | MAC Protocol Specification for UTRAN | Rel-19 read |