Description
Aerial UE communication refers to the set of 3GPP functionalities that allow User Equipment mounted on aerial vehicles — such as drones, unmanned aerial vehicles (UAVs), and other aircraft — to connect to and operate over cellular networks. It was introduced in Release 15 as part of the broader effort to support new vertical use cases beyond conventional terrestrial mobile broadband. The term is defined in the stage-2 architecture specifications 36.300 (E-UTRAN overall description) and 38.300 (NR and NG-RAN overall description), and the underlying service requirements and use cases are described in the corresponding 22-series and 23-series documents referenced by those specifications.
The need for a dedicated concept arises because aerial UEs behave very differently from terrestrial UEs. At altitude, a drone may have line-of-sight to many cells simultaneously, causing uplink interference to numerous neighbouring cells and creating challenging handover and mobility scenarios. The radio propagation characteristics differ substantially from ground-level users, and the antenna patterns of both the network and the device interact differently with the aerial geometry. Furthermore, regulatory requirements often demand that networks can identify and, where necessary, control or restrict aerial UE operation, for example to avoid interference with licensed aviation spectrum or to enforce no-fly zones.
To address these issues, 3GPP introduced a range of mechanisms under the Aerial UE communication umbrella. These include aerial UE identification, so that the network can recognise that a UE is airborne and apply appropriate policies; height- and location-based reporting, allowing the UE to inform the network of its altitude and position; dedicated mobility procedures tailored to the fast-moving, high-interference aerial environment; and interference mitigation techniques such as uplink power control adjustments and directional antenna configurations. Flight path information reporting allows the network to anticipate the UE's trajectory and prepare handovers in advance.
The functionality spans both LTE (E-UTRAN) and NR (NG-RAN), and the stage-2 descriptions in 36.300 and 38.300 define how the various procedures fit together. The Aerial UE function is referenced as a distinct capability, meaning that support is optional and negotiated between the UE and the network. This allows operators to enable aerial connectivity selectively, for example for authorised drone service providers, while maintaining control over the radio environment.
Aerial UE communication is an important enabler for the drone economy, supporting applications such as aerial inspection, delivery, surveillance, and emergency response. By integrating aerial terminals into the standard cellular framework rather than requiring bespoke radio solutions, 3GPP ensures that aerial connectivity benefits from the security, mobility management, and quality-of-service mechanisms already built into cellular networks.
Purpose & Motivation
Aerial UE communication exists because conventional cellular networks were designed and optimised for terrestrial users, and the emergence of commercial drones and UAVs exposed significant gaps. When a drone flies at altitude, its radio environment changes dramatically: it may see many cells at once, causing uplink interference across a wide area, and its mobility patterns differ from those of pedestrians or vehicles. Without specific support, aerial terminals could degrade network performance for ground users and experience unreliable connectivity themselves.
Before Release 15, there was no standardised way for a network to recognise that a UE was airborne, to obtain its altitude or flight path, or to apply aerial-specific mobility and interference management policies. Operators had to rely on proprietary or ad hoc solutions, which limited interoperability and scalability. The introduction of Aerial UE communication in Release 15 provided a standardised framework covering identification, reporting, mobility, and interference mitigation, allowing networks to support aerial users safely and efficiently.
The concept also responds to regulatory and safety requirements. Aviation authorities and spectrum regulators need assurance that cellular-connected drones will not cause harmful interference or operate in restricted airspace. Standardised aerial UE identification and reporting give networks the tools to enforce such policies. By defining the functionality in the core stage-2 specifications for both LTE and NR, 3GPP ensured that aerial connectivity could be deployed consistently across generations and vendors, unlocking a broad ecosystem of drone-based services.
What changed in its specifications
The latest release-to-release comparison of specifications that define Aerial UE communication. Each summary describes the whole specification, not only this term.
Rel-19 added NTN IoT Phase 3 for LTE, covering regenerative payload S1 removal, Msg3 early data transmission, and ETWS/CMAS for NB-IoT NTN. It also added inter-RAT mobility from E-UTRAN terrestrial network to NR NTN, plus NR NTN feeder link switchover via handover.
Full comparison in TS 36.300 →Rel-19 adds multi-hop L2 UE-to-Network relay for NR sidelink as the largest item. It also adds low-power wake-up signal and receiver (LP-WUS/WUR) text, on-demand SSB and SIB1 for network energy savings, and sub-band full duplex for TDD carriers.
Full comparison in TS 38.300 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference Aerial UE communication, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 36.300 vj20 | E-UTRAN Radio Interface Protocol Architecture | Rel-19 read |
| TS 38.300 vj40 | NR and NG-RAN Overall Description | Rel-19 read |