Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Aggregated IAB-MT Channel Bandwidth

Aggregated Integrated Access and Backhaul Mobile Termination Channel Bandwidth

Radio Access Network →

Aggregated IAB-MT Channel Bandwidth is the RF bandwidth, in MHz, in which an IAB-MT transmits and receives multiple contiguously aggregated carriers, defining the mobile-termination radio-frequency footprint of an IAB node under backhaul carrier aggregation.

Introduced
Rel-16
Where
Radio Access Network › NG-RAN (5G)
Specifications
2 specs
Aggregated IAB-MT Channel Bandwidth Description Purpose Neighbours Specifications

Description

The Aggregated IAB-MT Channel Bandwidth is an RF requirement concept defined in 3GPP TS 38.174 and referenced in TS 38.176. It specifies the total RF bandwidth occupied when the Mobile Termination (MT) part of an Integrated Access and Backhaul (IAB) node transmits and receives multiple contiguously aggregated carriers. The IAB-MT is the functional entity that behaves like a UE toward the parent IAB node or donor, terminating the backhaul link. When carrier aggregation is configured on that backhaul link, the IAB-MT may operate several contiguous component carriers, and the aggregated channel bandwidth is the MHz span covering all of them.

Architecturally, the IAB node comprises an IAB-DU, which serves UEs and child nodes over the access link, and an IAB-MT, which connects to the parent node over the backhaul link. The IAB-MT channel bandwidth concept parallels the UE channel bandwidth definitions in TS 38.101, but is tailored to the IAB context. Because the IAB-MT is essentially a UE-like modem embedded in a network node, its RF requirements — including the aggregated bandwidth definition — must account for the fact that the device is typically mains-powered and mounted at height, yet still must coexist with the IAB-DU operating in the same or adjacent spectrum.

The aggregated IAB-MT channel bandwidth determines the RF filter requirements, the maximum transmit power considerations, the spectrum emission mask, and the adjacent channel selectivity requirements for the backhaul link. It also constrains the number of resource blocks that can be scheduled on the backhaul link when carrier aggregation is active. In in-band IAB operation, where the backhaul and access links share the same spectrum, the aggregated IAB-MT channel bandwidth and the aggregated IAB-DU channel bandwidth must be jointly managed to avoid self-interference; this is one of the central RF design challenges of IAB.

The term was introduced in Rel-16 alongside the overall IAB framework. Its definition has remained unchanged through Rel-17, Rel-18, Rel-19, and Rel-20, indicating that the fundamental RF measurement concept has been stable even as IAB features such as enhanced mobility, multi-hop topologies, and duplexing enhancements were developed. This stability is valuable for equipment vendors, as it means RF front-end designs and conformance test setups for the IAB-MT aggregated bandwidth remain valid across releases.

For network planners and RF engineers, the aggregated IAB-MT channel bandwidth is a key parameter in backhaul link budgeting, spectrum planning, and coexistence analysis. It influences the choice of parent node, the achievable backhaul throughput, and the isolation requirements between the access and backhaul antennas on the IAB node. It is also a critical input to conformance testing, ensuring that IAB nodes do not cause harmful interference to other systems when operating with aggregated backhaul carriers.

Purpose & Motivation

The Aggregated IAB-MT Channel Bandwidth exists to give a precise, testable RF definition for the backhaul-facing side of an IAB node when multiple contiguous carriers are aggregated. Prior to Rel-16, backhaul links in cellular networks were typically realized with dedicated fiber or microwave equipment, and the RF requirements for UE-like devices in TS 38.101 did not anticipate a network node acting as a UE toward its parent. When 3GPP introduced IAB, it became necessary to define RF requirements for the IAB-MT separately, including how to measure emissions when several carriers are aggregated contiguously.

The concept solves the problem of spectral regulation and coexistence for backhaul links that use carrier aggregation. Without an aggregated bandwidth definition, each backhaul carrier would be assessed independently, failing to capture the combined spectral footprint and potentially allowing excessive emissions at the edges of the aggregated block. Defining the aggregated IAB-MT channel bandwidth in MHz enables consistent application of spectrum masks and guard-band rules.

Historically, the definition builds on the carrier aggregation framework from LTE Rel-10 and NR UE RF specifications, adapted to the IAB architecture. The motivation was particularly strong for in-band IAB, where the backhaul and access links share spectrum and the IAB-MT must coexist with the IAB-DU on the same node. The stable definition across Rel-16 to Rel-20 reflects the maturity of the RF framework and the fact that later IAB work concentrated on protocol and mobility enhancements rather than redefining basic RF measurement concepts.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-16 Initial

Initial introduction alongside the IAB framework. The aggregated IAB-MT channel bandwidth was defined as the RF bandwidth in which an IAB-MT transmits and receives multiple contiguously aggregated carriers, measured in MHz, establishing RF conformance requirements for the backhaul-facing entity.

The definition carried over unchanged; Rel-17 IAB enhancements did not revise the aggregated channel bandwidth concept.

The definition carried over unchanged; the term remained a stable reference in the IAB RF requirement specifications.

The definition carried over unchanged, continuing to serve as the basis for IAB-MT RF conformance testing.

The definition carried over unchanged into Rel-20.

Defining Specifications

3GPP specifications that define or reference Aggregated IAB-MT Channel Bandwidth, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.174 vk00 NR Integrated Access and Backhaul Requirements Rel-20 read
TS 38.176 vj40 IAB Conformance Testing Rel-19 read