Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

Array factor

Array Factor (Antenna Array Radiation Pattern)

Physical Layer →

Array factor is the normalized radiation pattern of an antenna array, assuming each element radiates isotropically, that isolates the geometric and phase contribution of array configuration from the individual element pattern for beamforming analysis.

Introduced
Rel-12
Where
Radio Access Network › Multi-RAT
Specifications
5 specs
Array factor Description Purpose What changed Neighbours Specifications

Description

The Array Factor (AF) is a fundamental concept in antenna theory that describes the radiation pattern of an antenna array when each individual array element is assumed to radiate isotropically (i.e., equally in all directions). In 3GPP specifications such as TS 37.840, TS 37.842, TS 37.843, TS 37.941, and TS 38.817, the array factor is used to separate the contribution of the array geometry and excitation (amplitude and phase weights applied to each element) from the intrinsic radiation pattern of the individual antenna element. The total radiation pattern of the array is then obtained by multiplying the array factor with the element pattern, following the principle of pattern multiplication.

Mathematically, for a linear array of N equally spaced elements with uniform spacing d and progressive phase shift, the array factor is expressed as AF(θ) = Σ(n=0 to N-1) w_n · exp(j·k·n·d·cosθ), where w_n are the complex excitation weights, k = 2π/λ is the wavenumber, and θ is the observation angle. For planar arrays (as used in massive MIMO), the array factor becomes a two-dimensional function of both azimuth and elevation angles, and the weights are typically chosen to steer the main beam toward a desired direction while controlling sidelobe levels. The array factor therefore captures how the geometry of the array (element spacing, number of elements, planar vs. linear configuration) and the applied beamforming weights shape the overall radiation pattern.

In the 3GPP context, the array factor is particularly important for the definition and testing of Active Antenna Systems (AAS) and massive MIMO base stations. TS 37.840 defines the radiated requirements for AAS base stations, and the array factor concept underpins the derivation of the composite antenna radiation pattern used in conformance testing. TS 37.842 and TS 37.843 specify the RF and radiated conformance testing for AAS base stations, where the array factor is used to model the beamforming behavior and to define test configurations. TS 37.941 covers the RF conformance testing of multi-standard radio (MSR) base stations, and TS 38.817 provides the background and rationale for NR RF requirements, where array factor modeling is essential for evaluating beam-based EIRP and TRP requirements.

The array factor is central to beamforming analysis because it determines key performance characteristics such as beamwidth, sidelobe levels, grating lobes, and beam steering capability. For a uniform linear array with half-wavelength spacing, the array factor produces a main lobe whose beamwidth decreases as the number of elements increases, which is the basis for the high-gain narrow beams used in massive MIMO. Grating lobes appear when element spacing exceeds half a wavelength, causing ambiguity in the beam pattern; 3GPP specifications therefore typically assume half-wavelength spacing in reference array models. The array factor also determines the spherical coverage characteristics that are evaluated in NR UE RF testing (TS 38.101-2) and the beam management procedures in the RAN.

In summary, the array factor is a mathematical abstraction that isolates the array-geometry-dependent portion of the radiation pattern, enabling engineers to design, analyze, and test antenna arrays independently of the specific element type. It is a foundational concept for the beamforming and massive MIMO technologies that are central to 5G NR and its evolution toward 6G.

Purpose & Motivation

The array factor exists to provide a clean mathematical separation between the two contributions to an antenna array's radiation pattern: the intrinsic pattern of each individual radiating element, and the pattern-shaping effect of the array geometry and excitation weights. Before this concept was formalized, analyzing large antenna arrays required full-wave electromagnetic simulation of the entire structure, which is computationally prohibitive for the large arrays used in massive MIMO. By assuming isotropic elements, the array factor allows engineers to compute the geometric contribution analytically and then multiply it by the measured or simulated element pattern, dramatically simplifying design and analysis.

In 3GPP standardization, the array factor became essential with the introduction of Active Antenna Systems and massive MIMO in Releases 12–13. Traditional base station RF requirements were defined in terms of conducted power at the antenna connector, but AAS base stations integrate the antenna array with the radio, so requirements must be defined in radiated terms (EIRP, TRP, OTA). The array factor provides the common reference model that allows 3GPP to define radiated requirements and test methods that are independent of the specific array implementation, enabling multi-vendor interoperability and fair conformance testing.

The concept also solves the problem of defining reference antenna models for UE testing. In NR FR2 testing, the UE is equipped with a phased array, and the array factor is used to model the beam patterns that must be evaluated for spherical coverage and beam peak requirements. This ensures that test procedures are reproducible and reflect realistic beamforming behavior.

What changed in its specifications

The latest release-to-release comparison of specifications that define Array factor. Each summary describes the whole specification, not only this term.

TR 37.941Rel-15 → Rel-16

Extended OTA BS testing to 43.5–48.2 GHz; added new measurement/uncertainty clauses; revised procedures.

Full comparison in TR 37.941 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-12 Initial

Initial definition introduced as 'the radiation pattern of an array antenna when each array element is considered to radiate isotropically.' This established the foundational reference model for AAS base station radiated requirements in TS 37.840 and related RF conformance specifications.

Definition carried over with minor editorial rewording (removal of leading article 'the'), with technical meaning unchanged: 'radiation pattern of an array antenna when each array element is considered to radiate isotropically'.

Definition carried over unchanged; the array factor concept continued to support AAS and MSR base station RF conformance testing.

Definition carried over unchanged; with the introduction of NR, the array factor concept was applied to NR base station and UE beamforming requirements.

Definition carried over unchanged; continued use in NR RF and radiated conformance specifications.

Definition carried over unchanged; array factor modeling remained foundational for beam-based EIRP/TRP requirements.

Definition carried over unchanged; continued application to NR-Advanced beamforming and coverage requirements.

Definition carried over unchanged; the concept remains a stable reference in 3GPP RF specifications.

Defining Specifications

3GPP specifications that define or reference Array factor, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 37.840 vc10 RF & EMC Requirements for Active Antenna Systems Rel-12 read
TS 37.842 vd30 AAS Base Station RF Requirements Study Rel-13 read
TR 37.843 vf70 AAS BS Radiated RF Requirement Background Rel-15 read
TR 37.941 vj20 RF Conformance Testing Background for Radiated BS Requirements Rel-19 read
TS 38.817 3GPP TR 38.817 Rel-12 read