Description
An ATG UE (Air-To-Ground User Equipment) is a terminal or user equipment that is mounted in an aircraft and supports the Air-To-Ground (ATG) feature, as indicated by the UE capability airToGroundNetwork-r18 defined in clause 4.2.2 of TS 38.306. The ATG feature enables aircraft to connect directly to terrestrial cellular networks — specifically, to base stations on the ground — providing in-flight broadband connectivity without relying on satellite links. This is a significant evolution in aviation connectivity, as it leverages the existing and evolving 5G NR terrestrial infrastructure to serve aircraft passengers and aircraft operational systems.
The ATG UE operates in a challenging radio environment. Aircraft fly at altitudes of up to approximately 10–12 km and travel at speeds of up to around 1,000 km/h, which introduces large Doppler shifts and rapid channel variations. The propagation path from the aircraft to the ground base station is predominantly line-of-sight, but it is affected by the aircraft fuselage, wing shadowing, and the elevation angle to the base station. The ATG UE must therefore support robust mobility, large cell coverage (cells can have radii of up to 100–300 km), and high-speed handover. The 3GPP specifications TS 38.101 (NR UE RF requirements), TS 38.521 (NR UE conformance testing), and TS 38.876 (NR ATG UE RF requirements) define the RF performance requirements for ATG UEs, including additional frequency bands and power classes tailored to the ATG use case.
The ATG feature was introduced in Release 18 as part of the broader 5G-Advanced work. It defines new operating bands and UE requirements for aircraft-mounted terminals. The ATG UE capability airToGroundNetwork-r18 signals to the network that the terminal supports ATG-specific procedures, allowing the network to configure appropriate mobility and radio resource management parameters. The ATG UE typically uses a dedicated antenna installation on the aircraft exterior, with an onboard unit that distributes connectivity to passenger devices via a local Wi-Fi or picocell network. The ATG UE itself acts as a relay or gateway between the aircraft's internal network and the terrestrial 5G network.
From an architectural perspective, the ATG UE connects to terrestrial gNBs that are deployed with antennas tilted upward or with dedicated ATG coverage configurations. The network must handle the high mobility of aircraft, including frequent handovers between cells along the flight path, and must manage interference between ATG UEs and terrestrial UEs. The ATG UE capability allows the network to apply ATG-specific mobility parameters, such as extended handover thresholds and Doppler compensation, to maintain reliable connectivity. The ATG feature also considers regulatory aspects, such as the allowed transmit power and the coordination between ATG and terrestrial services in shared spectrum.
In Release 19 and Release 20, the ATG UE definition and requirements continue to evolve, with refinements to the RF requirements and the addition of new capabilities. The ATG UE is a key enabler for the aviation connectivity market, providing a cost-effective alternative to satellite-based in-flight connectivity and leveraging the widespread deployment of 5G networks. It represents a convergence of the telecommunications and aviation industries, and its standardization in 3GPP ensures global interoperability and economies of scale.
Purpose & Motivation
The ATG UE exists to enable direct broadband connectivity between aircraft and terrestrial cellular networks, addressing the growing demand for in-flight connectivity. Traditionally, in-flight connectivity has relied on satellite links, which are expensive, have limited capacity, and introduce high latency. By standardizing an aircraft-mounted UE that can connect directly to terrestrial 5G networks, 3GPP provides a complementary, high-capacity, low-latency solution that leverages the massive investment in terrestrial cellular infrastructure. This is particularly valuable over densely populated landmasses where terrestrial coverage is abundant.
The ATG UE also solves the problem of defining a standardized terminal type for aircraft. Before Release 18, there was no 3GPP-defined UE category for aircraft-mounted terminals, which meant that aviation connectivity solutions were proprietary and could not benefit from the economies of scale and interoperability of 3GPP standards. By defining the ATG UE and its capability (airToGroundNetwork-r18), 3GPP enables a global ecosystem of ATG terminals, base stations, and chipsets, reducing costs and accelerating deployment.
The ATG UE addresses the unique radio challenges of the aviation environment, including high speed, high altitude, and long-range propagation. The RF requirements in TS 38.876 are specifically tailored to these conditions, ensuring that ATG UEs can maintain reliable links with terrestrial base stations over large distances and at high velocities. This standardization is essential for safety-critical aviation applications and for delivering a quality passenger experience.
Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (2 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.
Defining Specifications
3GPP specifications that define or reference ATG UE, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 38.101 vj40 | UE Radio Transmission and Reception; Satellite Access | Rel-19 read |
| TS 38.521 vj10 | UE Conformance Spec for NR Satellite Access | Rel-19 read |
| TR 38.876 vi20 | Technical Report on Air-to-Ground Network for NR | Rel-18 read |