Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

AUT

Antenna Under Test

Physical Layer →

AUT is the antenna being characterised in over-the-air measurement setups, whose performance is evaluated by 3GPP-defined test methods and metrics for validating massive MIMO and mmWave antenna systems.

Introduced
Rel-12
Where
Radio Access Network › Multi-RAT
Specifications
2 specs
AUT Description Purpose Neighbours Specifications

Description

Antenna Under Test (AUT) is the term used in 3GPP conformance and performance testing to denote the antenna system whose radiated characteristics are being measured in an Over-The-Air (OTA) test environment. As 5G NR introduced active antenna systems (AAS) and massive MIMO, traditional conducted testing—where the antenna is disconnected and the radio port measured directly—became insufficient because the antenna and radio are integrated and beamforming is performed jointly. The AUT concept therefore became central to verifying that a base station or UE radiates and receives as intended.

In the OTA test setup, the AUT is placed in an anechoic chamber or a compact antenna test range, and a probe antenna (or probe array) samples the radiated field at multiple angles. The measurements yield metrics such as Equivalent Isotropically Radiated Power (EIRP), Effective Isotropic Sensitivity (EIS), Total Radiated Power (TRP), and Total Isotropic Sensitivity (TIS). For beamforming devices, additional metrics include beam peak EIRP, beam centre direction accuracy, and spatial coverage. TR 37.840 provides the study of radio frequency (RF) and electromagnetic compatibility (EMC) requirements for active antenna systems, while TR 37.842 specifies the RF requirements and test methods for AAS base stations, including how the AUT is positioned and measured.

The AUT can be a complete base station, a radio unit, or a UE. For base stations, the AUT may be a large AAS panel with dozens or hundreds of elements, requiring a test range with sufficient quiet zone size and far-field distance. The far-field distance scales with the square of the antenna aperture and inversely with wavelength, so mmWave AUTs require shorter distances but tighter alignment tolerances. Test methodologies include the direct far-field method, the indirect far-field method (compact antenna test range), and the near-field-to-far-field transform method.

A key challenge is that the AUT's beamforming behaviour is dynamic. The test must exercise multiple beams and steering angles, and the measurement system must synchronise with the AUT's beam switching. 3GPP defines test configurations that specify which beams to measure and how to aggregate results. Calibration of the test range—using a reference antenna with known characteristics—is essential to isolate the AUT's performance from chamber and probe effects.

The AUT concept also appears in UE testing, where the device's antenna performance is measured in hand and head phantoms for specific absorption rate and OTA performance. Across both base station and UE domains, the AUT framework ensures that 5G devices meet radiated performance requirements that conducted tests cannot capture, particularly for integrated AAS and mmWave designs.

Purpose & Motivation

The AUT concept exists because the integration of antennas and radios in active antenna systems made conducted testing inadequate. In earlier generations, the antenna was a passive component connected via a cable to the radio, so performance could be verified at the radio port. With AAS and massive MIMO, beamforming is performed across the antenna array, and there is no accessible conducted reference point that represents radiated behaviour.

OTA testing of the AUT solves this by measuring the complete system as it operates in free space. This captures effects such as mutual coupling between elements, beamforming accuracy, and radome losses that conducted tests miss. It also enables verification of regulatory and operator requirements for radiated power and sensitivity.

The 3GPP studies in TR 37.840 and TR 37.842 were motivated by the need to define consistent, reproducible OTA test methods so that vendors and operators could validate AAS base stations against the same criteria. Standardising the AUT setup—chamber type, probe positioning, calibration, and metrics—ensures that test results are comparable across laboratories and that equipment meets the performance expected in real deployments.

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-12 Initial

Initial standardisation in TR 37.840 and TR 37.842 defining OTA test methods and RF requirements for active antenna systems, establishing the AUT concept for AAS base station verification.

Defining Specifications

3GPP specifications that define or reference AUT, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 37.840 vc10 RF & EMC Requirements for Active Antenna Systems Rel-12 read
TS 37.842 vd30 AAS Base Station RF Requirements Study Rel-13 read