Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Mobility

Barred Cell

Barred Cell

Mobility →

Barred Cell is a cell that a UE is not allowed to camp on, indicated via system information to prevent UEs from selecting it, often due to maintenance or access restrictions.

Introduced
Rel-8
Where
User Equipment
Specifications
4 specs
Barred Cell Description Purpose What changed Neighbours Detected Changes Specifications

Description

In 3GPP mobile networks, a Barred Cell is a cell that a User Equipment (UE) is not allowed to camp on. Cell barring is a mechanism used by the network to indicate that a cell is unavailable for normal service, typically due to maintenance, congestion, or access restrictions. The barring status is broadcast in the cell's system information (e.g., SIB1 in LTE and NR), allowing UEs to avoid attempting to camp on that cell. The specifications covering cell barring include TS 25.304 (UE procedures in idle mode and procedures for cell reselection in connected mode for UMTS), TS 25.367 (Mobility procedures for Home NodeB), TS 36.304 (E-UTRA UE procedures in idle mode), and TS 38.304 (NR UE procedures in idle mode).

Cell barring is signaled via specific information elements (IEs) in the system information. For example, in LTE and NR, the cellBarred IE in SIB1 indicates whether the cell is barred. When a cell is barred, UEs in idle mode will not select it as a candidate for camping, and UEs in connected mode may be redirected to another cell. Barring can be applied to all UEs or to specific classes of UEs (e.g., via cellBarred and intraFreqReselection). The network may also use access control mechanisms such as Access Class Barring (ACB) to restrict access for certain classes of users during congestion, but cell barring is a more fundamental restriction on camping.

The UE's cell selection and reselection procedures are defined in the 3GPP specifications. When a UE is powered on or loses coverage, it performs a cell search and selects a suitable cell. A suitable cell must meet certain criteria, including not being barred, belonging to the selected PLMN, and having acceptable signal quality. If the UE finds a barred cell, it will ignore it and continue searching for a suitable cell. The UE may also consider the cell's PLMN identity and tracking area to determine suitability. In connected mode, the network may hand over the UE to another cell if the current cell becomes barred.

Cell barring is also used in heterogeneous networks, such as with Closed Subscriber Group (CSG) cells and Home NodeBs (HeNBs). For example, a CSG cell may be barred for UEs that are not members of the CSG. The specifications TS 25.367 and TS 36.304 define the procedures for CSG cell selection and barring. Additionally, cell barring can be combined with other mobility mechanisms, such as cell reselection priorities and frequency-specific barring, to manage network load and ensure service continuity.

The barring status can be changed dynamically by the network, and UEs are informed via system information updates. The UE monitors system information to detect changes in barring status. If a cell becomes unbarred, UEs may reselect to it if it meets other criteria. The barring mechanism is essential for network operators to perform maintenance, manage congestion, and enforce access policies without disrupting service for all users.

Purpose & Motivation

The Barred Cell concept exists to allow network operators to control which cells UEs can camp on, ensuring that UEs do not attempt to access cells that are unavailable or restricted. This is crucial for network management, maintenance, and congestion control. By barring a cell, operators can prevent service degradation and direct UEs to alternative cells, improving overall network efficiency and user experience.

Historically, as mobile networks evolved from 2G to 3G and beyond, the need for flexible cell selection mechanisms grew. Early systems had limited barring capabilities, but with the introduction of UMTS and LTE, more sophisticated barring mechanisms were standardized. The 3GPP specifications define precise procedures for cell barring to ensure interoperability across vendors and networks. This is particularly important in multi-vendor, multi-technology environments where UEs must seamlessly move between cells.

Cell barring also supports regulatory and emergency requirements. For example, during emergencies, certain cells may be barred to prioritize emergency calls. Additionally, cell barring is used in CSG scenarios to restrict access to private cells. The concept continues to evolve with 5G, where additional barring mechanisms (e.g., for non-public networks) are introduced.

What changed in its specifications

The latest release-to-release comparison of specifications that define Barred Cell. Each summary describes the whole specification, not only this term.

TS 25.304Rel-18 → Rel-19

Rel-19 adds Non-Terrestrial Networks (NTN) for IoT Phase 3 for LTE to 3GPP TS 25.304. It also adds a list of PLMNs with associated access technology restrictions to idle-mode cell selection and reselection.

Full comparison in TS 25.304 →
TS 25.367Rel-11 → Rel-12

Adds PLMN reporting for CSG/hybrid cells in handover and measurement procedures; extends CSG cell reselection rules to Cell_FACH.

Full comparison in TS 25.367 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (1 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-15 1 change
  • Correction to UE behavior for barred cell TS 38.304CR0084

Defining Specifications

3GPP specifications that define or reference Barred Cell, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 25.304 vj10 UE Idle Mode Procedures Rel-19 read
TS 25.367 vj00 Home NodeB Mobility Procedures Rel-19 read
TS 36.304 vj30 LTE UE Idle Mode Procedures Rel-19 read
TS 38.304 vj30 NR UE Idle and Inactive State Procedures Rel-19 read