Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

BEM

Block Edge Mask

Radio Access Network →

BEM is a regulatory and technical framework defining out-of-block emission limits at the edges of spectrum blocks to ensure coexistence between adjacent operators and prevent interference between neighboring spectrum holders.

Introduced
Rel-12
Where
Radio Access Network › E-UTRAN (LTE)
Specifications
3 specs
BEM Description Purpose Neighbours Specifications

Description

Block Edge Mask (BEM) is a technical concept used in spectrum regulation and radio network planning to define the permissible emission levels at the boundaries of a spectrum block assigned to an operator. It establishes a mask — a set of emission limits as a function of frequency offset from the block edge — that ensures transmissions within one block do not cause harmful interference to adjacent blocks operated by other entities. BEM is fundamental to spectrum sharing and coexistence in licensed mobile networks.

The BEM concept was introduced in 3GPP Release 12 and further refined in Releases 13 and 14, with specifications including TS 36.858, TS 36.895, and TS 37.814 addressing different aspects of BEM for LTE and multi-RAT base stations. The mask typically consists of a baseline level (the in-block emission limit), a transition region near the block edge, and an out-of-block limit that applies beyond a certain frequency offset. These limits are expressed in terms of EIRP or conducted power per antenna and depend on factors such as the operating band, the base station class, and the coexistence scenario.

The primary application of BEM is in the coordination of spectrum between operators in adjacent blocks, particularly in bands where spectrum is assigned in contiguous blocks to different operators. Without BEM, an operator's transmissions near the edge of its block could spill into the neighboring block and degrade the performance of the adjacent network. BEM provides a predictable framework that allows operators to plan their networks independently while ensuring that interference remains within acceptable bounds.

In 3GPP specifications, BEM is closely related to Adjacent Channel Leakage Ratio (ACLR) and Adjacent Channel Selectivity (ACS) requirements. While ACLR characterizes the transmitter's ability to limit emissions to adjacent channels, BEM provides a regulatory framework that translates these technical parameters into enforceable limits at block edges. TS 36.858 addresses BEM for LTE base stations, while TS 37.814 covers multi-standard radio (MSR) base stations, reflecting the need to define BEM for equipment supporting multiple radio access technologies.

The BEM framework has become increasingly important with the introduction of new spectrum bands, spectrum sharing arrangements, and the coexistence of 4G and 5G networks in adjacent or overlapping spectrum. It provides a common language between regulators, operators, and equipment vendors for specifying and verifying coexistence requirements. As networks densify and spectrum becomes more scarce, BEM remains a critical tool for ensuring efficient and interference-free use of radio spectrum.

Purpose & Motivation

BEM was created to provide a standardized, enforceable framework for managing interference between operators sharing adjacent spectrum blocks. In traditional spectrum management, guard bands were often used to separate operators, but guard bands waste valuable spectrum. BEM allows more efficient use of spectrum by defining precise emission limits that permit operation close to block edges without harmful interference, reducing or eliminating the need for guard bands.

The motivation for standardizing BEM in 3GPP Release 12 was the proliferation of LTE deployments in various bands and the need for consistent coexistence rules across equipment vendors and operators. Earlier approaches relied on generic ACLR requirements that did not account for the specific geometry of block assignments and the varying sensitivity of adjacent receivers. BEM provides a more nuanced framework that considers the actual spectrum block layout and the characteristics of neighboring systems.

BEM also supports regulatory harmonization, allowing different countries and regions to adopt consistent technical conditions for spectrum assignments. This reduces the complexity of equipment certification and enables economies of scale in network deployment. The evolution through Releases 13 and 14 extended BEM to new scenarios, including multi-standard radio equipment and additional bands, reflecting the growing complexity of spectrum coexistence in modern mobile networks.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-12 Initial

Initial introduction of BEM in 3GPP specifications, establishing the framework for block edge emission limits to enable coexistence between adjacent spectrum block operators, primarily for LTE base stations.

The definition text carried over unchanged from Release 12; contextually, BEM requirements were extended to additional scenarios and bands, but the core definition of Block Edge Mask remained the same.

The definition text carried over unchanged from Release 12; BEM continued to be applied in new spectrum and multi-RAT contexts, with TS 37.814 addressing multi-standard radio base station BEM requirements.

Defining Specifications

3GPP specifications that define or reference BEM, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.858 ve00 LTE 2.6 GHz SDL Band Technical Report Rel-14 read
TS 36.895 vd00 European 700 MHz SDL for LTE Rel-13 read
TS 37.814 vc00 L-band Supplemental Downlink for UTRA/E-UTRA Rel-12 read