Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

BHH

Beside Head and Hand

Physical Layer →

BHH is a test and evaluation scenario for assessing human exposure to radio frequency emissions from mobile devices, defining specific measurement positions relative to a user's head and hand for compliance testing in 5G and advanced radio systems.

Introduced
Rel-18
Where
User Equipment
Specifications
2 specs
BHH Description Purpose Neighbours Detected Changes Specifications

Description

Beside Head and Hand (BHH) is a technical term used in 3GPP specifications related to radio frequency (RF) exposure assessment and compliance testing for mobile devices. It defines a specific test configuration in which the device under test is positioned beside the user's head and hand, reflecting realistic usage scenarios where a handset is held near the head during voice calls or other operations. The BHH scenario is particularly relevant for evaluating specific absorption rate (SAR) and power density exposure metrics in advanced radio systems, including 5G millimeter-wave and sub-6 GHz devices.

BHH was introduced in 3GPP Release 18 and is specified in TS 38.161 and TS 38.561. These specifications address the measurement procedures and requirements for assessing RF exposure from 5G user equipment in proximity to the human body. The BHH configuration complements other test positions such as against the head (cheek position) and in front of the face, providing a comprehensive set of scenarios that cover typical device usage patterns. The introduction of BHH reflects the need for more realistic exposure assessment as devices incorporate advanced antenna systems, beamforming, and higher frequency bands.

In the BHH test setup, the device is positioned at a defined distance and orientation relative to a human phantom that simulates the dielectric properties of head and hand tissues. The measurement captures the RF energy absorbed by or incident upon the phantom, which is then compared against regulatory limits established by bodies such as ICNIRP and the FCC. The specifications define the phantom geometry, the device positioning tolerances, the measurement instrumentation, and the evaluation procedures to ensure repeatable and reproducible results across test laboratories.

The BHH scenario is particularly important for 5G devices operating in millimeter-wave bands, where the shorter wavelength and higher path loss lead to different exposure characteristics compared to lower frequencies. Beamforming and antenna arrays can concentrate energy in specific directions, making the relative position of the device and the human body critical for accurate exposure assessment. BHH testing ensures that devices comply with exposure limits even when held in realistic positions that may direct beams toward the user's head or hand.

As 5G networks continue to evolve and new frequency bands are deployed, the BHH framework provides a standardized basis for demonstrating compliance with RF exposure regulations. It supports the introduction of new device form factors and usage models while maintaining protection for users. The specifications in TS 38.161 and TS 38.561 are part of a broader effort within 3GPP to address RF exposure in the context of 5G and beyond, ensuring that technological advances do not compromise human safety.

Purpose & Motivation

BHH was created to address the need for more realistic and comprehensive RF exposure assessment scenarios for advanced mobile devices. Traditional test positions, such as the device placed directly against the head, did not fully capture the variety of ways users interact with modern smartphones, particularly when devices are held slightly away from the head or in the hand during use. The BHH scenario fills this gap by defining a test configuration that reflects these realistic usage patterns.

The introduction of BHH in Release 18 was motivated by the deployment of 5G networks and the use of higher frequency bands, including millimeter-wave spectrum. At these frequencies, the interaction between device emissions and human tissue differs from lower bands, and the directionality of beamformed transmissions makes the device-to-body geometry more important. Existing exposure assessment frameworks needed to be extended to ensure that 5G devices are evaluated under conditions that accurately represent real-world use.

BHH also supports regulatory compliance and consumer confidence. By providing standardized test procedures, it enables manufacturers to demonstrate compliance with exposure limits consistently across different markets and regulatory regimes. This reduces barriers to market entry and ensures that users are protected regardless of where devices are sold. The BHH framework is part of 3GPP's ongoing commitment to addressing health and safety considerations alongside technical performance in the development of mobile broadband standards.

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (1 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-18 1 change

Defining Specifications

3GPP specifications that define or reference BHH, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.161 vj30 UE TRP and TRS Requirements Rel-19 read
TS 38.561 vj20 NR FR1 OTA TRP/TRS Conformance Testing Rel-19 read