Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

BM

Beam Management

Radio Access Network →

BM is a set of 3GPP procedures for acquiring, maintaining, and recovering beams in NR, especially at mmWave, ensuring reliable links by aligning transmit and receive beams and handling beam failures.

Introduced
Rel-18
Where
Radio Access Network › NG-RAN (5G)
Specifications
2 specs
BM Description Purpose Neighbours Specifications

Description

Beam Management (BM) is a fundamental framework in 5G NR, particularly for frequency ranges above 6 GHz where directional beamforming is required to overcome high path loss. BM encompasses a set of physical-layer and higher-layer procedures that allow the network and the UE to select, refine, and maintain appropriate transmit (Tx) and receive (Rx) beams. The process is typically divided into three phases: initial beam acquisition (P1), beam refinement (P2/P3), and beam tracking/beam failure recovery (BFR).

In the initial acquisition phase (P1), the gNB transmits synchronization signal blocks (SSBs) in different beam directions, and the UE measures the received power (e.g., RSRP) to identify a suitable beam pair. This is often referred to as a beam sweep. The UE reports the best beam(s) to the network via random access or measurement reports. During beam refinement (P2/P3), the network can use channel state information reference signals (CSI-RS) for finer beam alignment, either on the gNB side (P2) or the UE side (P3).

Beam tracking and failure recovery are critical for mobility and robustness. The UE continuously monitors the quality of the serving beam using reference signals. If the quality degrades below a threshold, the UE can trigger a beam failure recovery procedure, which may involve identifying a new candidate beam and sending a beam failure recovery request (BFRQ) to the gNB. This is essential to avoid radio link failure (RLF) in highly directional systems.

BM is tightly coupled with other NR features such as multiple-input multiple-output (MIMO), beamforming, and mobility management. It relies on a set of measurement quantities (e.g., L1-RSRP, L1-SINR) and reporting configurations defined in 3GPP specifications like TS 38.213, TS 38.214, and TS 38.331. The framework also supports multi-beam operation, where multiple beams can be active simultaneously for data and control channels.

In 3GPP Release 18 and beyond, BM continues to evolve to support new use cases such as extended reality (XR), massive MIMO enhancements, and higher frequency bands (e.g., FR2-2). The specifications 38.843 and 38.864 address study items on beam management enhancements, including beam prediction and AI/ML-based beam management. These studies aim to reduce beam management overhead and improve reliability in dynamic environments.

Purpose & Motivation

Beam Management exists to solve the fundamental challenge of operating at millimeter-wave and higher frequencies, where signals experience severe path loss and blockage. Traditional omni-directional or wide-beam transmission is inefficient because it wastes power and reduces coverage. BM enables the use of highly directional beams to concentrate energy, thereby improving link budget and spectral efficiency.

Prior to 5G NR, cellular systems primarily operated at sub-6 GHz frequencies where beamforming was limited to simple sectorization or low-order MIMO. With the introduction of mmWave in NR, the need for dynamic, UE-specific beam alignment became critical. BM provides the mechanisms to discover, refine, and maintain these beams without excessive signaling overhead or latency.

Furthermore, BM addresses the fragility of directional links. Because beams are narrow, any movement or blockage can cause rapid signal degradation. The beam failure recovery procedures within BM ensure that the link can be re-established quickly, maintaining service continuity. This is particularly important for mobility and for supporting ultra-reliable low-latency communication (URLLC) use cases.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-18 Initial

Initial study on beam management enhancements, including AI/ML-based beam prediction and overhead reduction, documented in TR 38.843.

Continuation of beam management enhancements with further study on advanced beam management techniques, captured in TR 38.864.

Defining Specifications

3GPP specifications that define or reference BM, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.843 vj00 Study on AI/ML for NR Air Interface Rel-19 read
TR 38.864 vi10 Technical Report on Network Energy Savings for NR Rel-18 read