Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

CB-Msg3-EDT

Contention Based Msg3 Early Data Transmission

Radio Access Network →

CB-Msg3-EDT is a Rel-19 LTE feature enabling Early Data Transmission from RRC_IDLE using a contention-based uplink grant in Msg3, without sending a random access preamble or receiving a random access response.

Introduced
Rel-19
Where
Radio Access Network › E-UTRAN (LTE)
Specifications
3 specs
CB-Msg3-EDT Description Purpose What changed Neighbours Detected Changes Specifications

Description

CB-Msg3-EDT (Contention Based Msg3 Early Data Transmission) is a Rel-19 enhancement to LTE Early Data Transmission (EDT) procedures defined in 3GPP TS 36.300, 36.321 and 36.331. In conventional EDT, a UE in RRC_IDLE first transmits a random access preamble (Msg1), receives a random access response (Msg2) containing an uplink grant, and then sends its small data payload in Msg3. CB-Msg3-EDT removes the preamble transmission and the random access response reception from this chain: the UE transmits its data directly in a contention-based uplink shared channel (UL-SCH) resource in Msg3, relying on pre-configured or broadcast contention-based resources rather than a dedicated grant obtained through the random access procedure.

The procedure operates while the UE remains in RRC_IDLE. The network configures contention-based UL-SCH resources via system information (SIBs) handled by RRC (TS 36.331). The MAC layer (TS 36.321) selects one of these contention-based resources and transmits the Msg3 containing the UE identity and the small data payload. Because multiple UEs may select the same resource, collisions are possible and are resolved by the network through the subsequent response message (CB-Msg4) and any contention resolution mechanism. The absence of Msg1/Msg2 exchanges reduces the number of signaling messages and the associated latency and energy consumption.

Architecturally, CB-Msg3-EDT sits between the RRC and MAC layers. RRC configures the contention-based resources and the conditions under which the UE may use them; MAC performs resource selection, builds the Msg3 MAC PDU, and handles the HARQ and contention resolution aspects. The eNB receives the Msg3, decodes the UE identity, and responds with CB-Msg4, which acknowledges one or more CB-Msg3 transmissions and completes contention resolution. The procedure is intended for small, infrequent data transfers typical of machine-type communication and IoT devices.

Compared with legacy EDT, CB-Msg3-EDT eliminates the random access preamble transmission and the random access response reception, which are the most latency- and energy-intensive parts of the access procedure for a small data packet. This is particularly valuable for devices with strict power budgets, such as NB-IoT and eMTC devices, and for scenarios where the random access channel is congested. The trade-off is an increased probability of collision on the contention-based resources, which the network must manage through resource sizing and contention resolution.

The feature is specified across the RAN architecture description (36.300), the MAC specification (36.321) and the RRC specification (36.331), reflecting its cross-layer nature. It complements other Rel-19 work on small data transmission and aligns LTE EDT capabilities with the broader industry trend toward grant-free and contention-based access for massive IoT.

Purpose & Motivation

CB-Msg3-EDT exists to reduce the latency, signaling overhead and energy consumption of small data transmissions from idle-mode devices. In legacy LTE EDT, a device must first perform a random access preamble transmission and wait for a random access response before it can send its data in Msg3. For a small payload, these two steps dominate the access procedure and consume significant time and battery power. By allowing the device to transmit data directly in a contention-based Msg3 without the preamble and response, the procedure shortens the access chain and lowers the energy per transaction.

The feature is motivated by the growth of machine-type communication and IoT traffic, where devices transmit small, infrequent packets and are often battery-powered. Previous approaches either used the full random access procedure or relied on dedicated grants, both of which are inefficient for such traffic. Contention-based access was already used for random access preambles, but extending it to the data-bearing Msg3 required new resource configuration and contention resolution mechanisms.

CB-Msg3-EDT also addresses RACH congestion in dense deployments. When many devices attempt access simultaneously, the preamble-based procedure can become a bottleneck. By removing the preamble and response steps, the procedure reduces load on the random access channel and allows the network to serve more devices with fewer signaling exchanges. The Rel-19 specification work therefore targets improved support for massive IoT and latency-sensitive small data applications in LTE networks.

What changed in its specifications

The latest release-to-release comparison of specifications that define CB-Msg3-EDT. Each summary describes the whole specification, not only this term.

TS 36.300Rel-18 → Rel-19

Rel-19 added NTN IoT Phase 3 for LTE, covering regenerative payload S1 removal, Msg3 early data transmission, and ETWS/CMAS for NB-IoT NTN. It also added inter-RAT mobility from E-UTRAN terrestrial network to NR NTN, plus NR NTN feeder link switchover via handover.

Full comparison in TS 36.300 →
TS 36.321Rel-18 → Rel-19

Rel-19 adds to TS 36.321 a contention-based Msg3 early data transmission (CB-Msg3-EDT) procedure, along with new definitions and abbreviations. This is the only feature overview provided, so no other additions can be named.

Full comparison in TS 36.321 →

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (1 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-19 1 change
  • Corrections for CB-MSG3-EDT TS 36.321CR1601

Defining Specifications

3GPP specifications that define or reference CB-Msg3-EDT, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.300 vj20 E-UTRAN Radio Interface Protocol Architecture Rel-19 read
TS 36.321 vj30 E-UTRA MAC Protocol Specification Rel-19 read
TS 36.331 vj40 E-UTRA Radio Resource Control (RRC) Protocol Rel-19 read