Description
Codec Type is a 3GPP term that defines a specific type of speech coding algorithm applied on a specific radio access or other transport technology. It is used in the context of speech codec negotiation and selection, particularly in the IP Multimedia Subsystem (IMS) and circuit-switched networks. The codec type identifies the combination of a speech codec (e.g., AMR, AMR-WB, EVS) and the transport or radio technology on which it is used (e.g., GSM FR, FR_AMR). This distinction is important because the same codec may be used differently depending on the underlying network, and the codec type ensures that the correct codec configuration is applied.
The codec type is typically signaled in call control protocols such as the Session Initiation Protocol (SIP) and the Session Description Protocol (SDP) for IMS, or in the Bearer Independent Call Control (BICC) and ISDN User Part (ISUP) for circuit-switched networks. In 3GPP TS 26.103, the codec type is defined as part of the codec list used for speech codec negotiation, and it is mapped to specific codec identifiers. For example, the codec type "GSM FR" refers to the GSM Full Rate speech codec, while "FR_AMR" refers to the AMR codec used in a full-rate channel. The codec type also distinguishes between narrowband and wideband codecs, and between codecs used in different radio access technologies such as GERAN, UTRAN, and E-UTRAN.
The codec type is used by network elements such as the Media Gateway (MGW), the Media Resource Function (MRF), and the User Equipment (UE) to select the appropriate codec for a session. During session establishment, the originating and terminating networks negotiate the codec type based on the capabilities of the UE and the network, as well as the radio access technology. The codec type is also used in transcoding decisions: if the codec types supported by the two ends differ, a transcoder may be inserted to convert between them. The codec type thus plays a crucial role in ensuring interoperability and optimal voice quality across heterogeneous networks.
In terms of architecture, the codec type is part of the codec negotiation framework defined in 3GPP specifications such as TS 26.103 (Speech codec list for GSM and UMTS networks) and TS 26.916 (Codec for Enhanced Voice Services). The codec type is also referenced in the IMS Multimedia Telephony Service (MMTel) specifications, where it is used to define the codec capabilities of the UE and the network. The codec type is typically represented as an enumerated value or a string in signaling messages, and it is mapped to the actual codec parameters (e.g., sampling rate, bit rate, frame size) used by the codec.
Key components of the codec type include the codec name (e.g., AMR, EVS), the mode of operation (e.g., full rate, half rate), and the transport technology (e.g., GSM, UMTS, LTE). The codec type is used in conjunction with other parameters such as the codec mode set and the codec configuration to fully specify the speech coding. The codec type is also used in the context of network sharing and roaming, where different networks may support different codec types, and the codec type helps to ensure that the session can be established with a common codec.
In summary, the codec type is a fundamental concept in 3GPP speech services, enabling the selection and negotiation of speech codecs across different radio and transport technologies. It ensures that voice services can be delivered with the best possible quality and interoperability, and it is a key element in the design of 3GPP networks from Rel-8 onwards.
Purpose & Motivation
The Codec Type concept exists to solve the problem of interoperability between different speech codecs and radio access technologies in 3GPP networks. Before the introduction of a standardized codec type, networks used proprietary or vendor-specific codec identifiers, which made it difficult to negotiate codecs across network boundaries and between different generations of technology. The codec type provides a common language for describing speech codecs and their application, enabling seamless interworking between GSM, UMTS, LTE, and IMS networks.
Historically, the need for a codec type became more pressing with the introduction of the AMR codec and the evolution towards IP-based networks. The AMR codec introduced multiple modes and the ability to adapt to radio conditions, which required a more sophisticated way of signaling codec capabilities.
The codec type also addresses the limitations of earlier approaches that used a single codec identifier without considering the transport technology. For example, the same codec (e.g., AMR) can be used on different radio technologies (e.g., GSM, UMTS, LTE) with different configurations, and the codec type allows the network to distinguish between these configurations. This is essential for ensuring that the correct codec parameters are used and that the voice quality is optimized for the specific radio conditions.
What changed in its specifications
The latest release-to-release comparison of specifications that define Codec Type. Each summary describes the whole specification, not only this term.
Rel-13 added EVS support in 3G Circuit-Switched networks, including UMTS_EVS codec type definitions and configurations for UMTS CS networks.
Full comparison in TS 26.103 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Wording changed: the definition was broadened to include "radio or other transport technology" and expanded examples to include AMR, AMR-WB, EVS, G.722, G.711, and a reference to TS 26.103. This reflected the growing range of codecs and transport technologies beyond traditional radio access.
Defining Specifications
3GPP specifications that define or reference Codec Type, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 26.103 vj00 | 3GPP Codec Lists for OoBTC and TrFO | Rel-19 read |
| TR 26.916 ve20 | eSRVCC Transcoding Minimization Study | Rel-14 read |