Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

Contiguous resource allocation

Contiguous Resource Allocation

Physical Layer →

Contiguous resource allocation is a scheme central to LTE and NR carrier aggregation and RF conformance that allocates consecutive resource blocks within one carrier or across contiguously aggregated carriers, allowing the nominal channel spacing gap between carriers.

Introduced
Rel-10
Where
User Equipment
Specifications
5 specs
Contiguous resource allocation Description Purpose What changed Neighbours Specifications

Description

Contiguous resource allocation describes a scheduling outcome in which the resource blocks assigned to a UE are consecutive—either within a single component carrier or spanning multiple carriers that are aggregated contiguously in the frequency domain. In LTE (TS 36.101 and 36.521) and NR (TS 38.101, 38.521 and 38.785), this concept is fundamental both to the resource allocation signalling design and to the RF requirements that define how aggregated carriers may be placed in spectrum.

Within a single carrier, LTE uses resource allocation types that exploit contiguity. Resource allocation type 0 signals resource block groups via a bitmap, type 1 signals individual resource blocks within a subset, and type 2 signals a starting resource block and length using a resource indication value (RIV), which inherently describes a contiguous block. Contiguous allocation reduces signalling overhead and enables simpler frequency-domain scheduling, and it aligns with the SC-FDMA uplink constraint in LTE, where clustered (non-contiguous) transmission would increase PAPR and was only later enabled through carrier aggregation and specific transmission modes.

Across carriers, contiguous aggregation means the component carriers are placed adjacent to one another in the same operating band, subject to the allowed gap caused by the nominal channel spacing (the raster-aligned spacing between carrier centre frequencies). This gap is not wasted spectrum in the regulatory sense—it is a consequence of channel numbering—and the specifications explicitly permit it within the definition of contiguous allocation. Contiguous aggregation enables a single wideband baseband and RF chain to process the aggregated carriers, simplifying UE implementation and improving efficiency compared with non-contiguous aggregation, which requires multiple RF chains and is more demanding on filtering and linearity.

The RF conformance specifications use contiguous allocation to define transmitter and receiver requirements: adjacent channel leakage ratio (ACLR), spectrum emission mask, spurious emissions, and receiver blocking characteristics differ between contiguous and non-contiguous aggregation scenarios. TS 38.785 specifically addresses additional RF requirements for NR carrier aggregation, including contiguous intra-band cases. Test specifications (36.521, 38.521) then define the measurement procedures that verify a UE meets these requirements when transmitting or receiving with contiguous allocations.

In NR, the concept extends naturally to intra-band contiguous carrier aggregation, where numerologies may differ across carriers and the gap between them is governed by the nominal channel spacing rules. The scheduler in the gNB or eNB decides whether to allocate contiguous resources based on channel quality, UE capability, and the need to balance spectral efficiency against diversity. Contiguous allocation generally yields better channel estimation and lower PAPR, while non-contiguous allocation offers frequency diversity. The definition has remained stable from Rel-10 through Rel-20, reflecting its foundational role in both LTE and NR RF and physical-layer frameworks.

Purpose & Motivation

Contiguous resource allocation exists to provide a precise, shared vocabulary for two related problems: how a scheduler assigns consecutive resource blocks to a UE, and how multiple component carriers may be placed adjacently in spectrum for carrier aggregation. In LTE, the SC-FDMA uplink favoured contiguous allocation because it keeps the cubic metric low, allowing cheaper power amplifiers and better coverage. The RIV-based type 2 allocation encodes a contiguous block compactly, reducing downlink control overhead.

For carrier aggregation, the distinction between contiguous and non-contiguous aggregation is critical to RF design and conformance. Contiguous carriers can share a single RF chain and baseband, while non-contiguous carriers require separate chains and stricter filtering. The specifications needed a definition that allowed for the unavoidable gap due to nominal channel spacing, so that carriers placed on the standard raster would still count as contiguous. This avoided penalising operators and vendors who follow the channel numbering plan.

The definition also supports test standardisation: conformance tests must know whether a configuration is contiguous to apply the correct ACLR, SEM and blocking requirements. By fixing the meaning from Rel-10 onward and carrying it unchanged into NR, 3GPP ensured continuity between LTE and NR RF frameworks.

What changed in its specifications

The latest release-to-release comparison of specifications that define Contiguous resource allocation. Each summary describes the whole specification, not only this term.

TS 36.101Rel-12 → Rel-13

Rel-13 added carrier aggregation requirements, 4Rx antenna port tests, MTC coverage enhancements, LAA test parameters, FD-MIMO procedures, and downlink interference mitigation requirements.

Full comparison in TS 36.101 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-10 Initial

Initial definition introduced alongside LTE-Advanced carrier aggregation: a resource allocation of consecutive resource blocks within one carrier or across contiguously aggregated carriers, allowing the gap due to nominal channel spacing. This established the contiguous versus non-contiguous aggregation distinction used in RF requirements.

Definition text carried over unchanged from Rel-10.

Definition text carried over unchanged from Rel-10.

Definition text carried over unchanged from Rel-10.

Definition text carried over unchanged from Rel-10.

Definition text carried over unchanged from Rel-10; the concept continued to apply as NR specifications were introduced.

Definition text carried over unchanged from Rel-10.

Definition text carried over unchanged from Rel-10.

Definition text carried over unchanged from Rel-10.

Definition text carried over unchanged from Rel-10.

Definition text carried over unchanged from Rel-10.

Defining Specifications

3GPP specifications that define or reference Contiguous resource allocation, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.101 vk10 E-UTRA UE RF Requirements Rel-20 read
TS 36.521 vj11 E-UTRA UE Conformance Testing for Satellite Access Rel-19 read
TS 38.101 vj40 UE Radio Transmission and Reception; Satellite Access Rel-19 read
TS 38.521 vj10 UE Conformance Spec for NR Satellite Access Rel-19 read
TR 38.785 vh00 UE radio transmission for enhanced NR sidelink Rel-17 read