Description
The Data transfer position is a specific test configuration defined in 3GPP specifications 25.144 and 37.144 for assessing the radio frequency (RF) exposure of user equipment (UE) when it is used away from the user's head. This position is particularly relevant for devices classified as LME (Laptop Mounted Equipment) and LEE (Laptop Embedded Equipment), which are typically used in free-space configurations where the device is not held against the head or body. In this configuration, the UE is tested without the use of head and hand phantoms, simulating a realistic scenario where the device is placed on a surface or used at a distance from the user.
The concept is part of the broader framework for evaluating Specific Absorption Rate (SAR) and Maximum Permissible Exposure (MPE) compliance. For devices that can be used in multiple positions, 3GPP defines various test positions to ensure that the RF exposure does not exceed regulatory limits. The Data transfer position is one such position, specifically intended for devices that are not held against the body during data transfer operations. It is used in conjunction with other positions, such as the head position and body position, to provide a comprehensive assessment of exposure.
In the context of LME and LEE devices, the Data transfer position is used to evaluate exposure when the device is operating in a free-space environment, such as on a desk or table. The absence of head and hand phantoms in this configuration reflects the typical usage scenario where the user is not in direct contact with the device. The test setup involves placing the device in a specified orientation and measuring the RF field strength or SAR at a defined distance. The results are then compared against the applicable exposure limits to ensure compliance.
The Data transfer position is defined in 3GPP TS 25.144 for UTRA and TS 37.144 for multi-standard radio (MSR) and E-UTRA. These specifications provide the detailed test procedures, including the positioning of the device, the distance to the measurement probe, and the required measurement uncertainty. The position is also referenced in other 3GPP documents related to RF exposure, such as TS 25.101 and TS 36.101, which specify the user equipment (UE) radio transmission and reception requirements.
Over the releases, the definition of the Data transfer position has remained largely stable, with only minor editorial changes. This reflects the maturity of the test methodology and the consistent approach to RF exposure assessment across generations of cellular technology. The term continues to be relevant for 5G and beyond, as new device types and usage scenarios emerge, ensuring that RF exposure compliance is maintained for all user equipment.
Purpose & Motivation
The Data transfer position exists to provide a standardized test configuration for evaluating the RF exposure of user equipment that is used away from the user's head, particularly for LME and LEE devices. Regulatory bodies worldwide impose limits on the amount of RF energy that can be absorbed by the human body, and 3GPP specifications define test positions to demonstrate compliance with these limits. The Data transfer position addresses the need to assess exposure in free-space scenarios where the device is not in direct contact with the user, which is common for laptops and embedded modules.
Prior to the introduction of this position, test methodologies may have focused primarily on devices held against the head or body, which did not adequately cover the usage scenarios of laptop-mounted equipment. The Data transfer position fills this gap by providing a representative configuration for free-space exposure, ensuring that devices are tested under conditions that reflect their actual use. This helps manufacturers design products that meet regulatory requirements and gives operators confidence that the devices used on their networks are safe.
The position was introduced in Release 11 as part of the ongoing evolution of RF exposure test standards. It has since been maintained and referenced in subsequent releases, demonstrating its continued relevance. The definition has undergone minor wording changes to improve clarity, but the core concept has remained unchanged, reflecting the stability of the underlying test methodology.
What changed in its specifications
The latest release-to-release comparison of specifications that define Data transfer position. Each summary describes the whole specification, not only this term.
Added free-space TRP and TRS minimum performance requirements for laptop mounted and embedded devices in data transfer position, covering FDD, GSM, and UTRA LCR TDD.
Full comparison in TS 25.144 →Rel-15 brings only minor changes to TS 37.144: 0 clauses changed, with no change attributed to a release feature.
Full comparison in TS 37.144 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference Data transfer position, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 25.144 vb20 | OTA Antenna Requirements for UE and MS | Rel-11 read |
| TS 37.144 vj00 | UE OTA Antenna Performance Requirements | Rel-19 read |