Description
The Downlink Bandwidth Part (DL BWP) is a 5G NR concept introduced in Release 15 that defines a contiguous subset of resource blocks on a carrier's downlink for a given UE. While an NR carrier can be very wide (up to 400 MHz in FR2, 100 MHz in FR1), a UE need not operate across the full carrier bandwidth at all times. Instead, the gNB configures one or more DL BWPs per serving cell, and the UE receives downlink transmissions within the active DL BWP. The precise physical-layer behavior — including PDCCH monitoring, PDSCH resource allocation, and reference signal reception — is defined in TS 38.213.
BWPs serve several purposes. First, they enable bandwidth adaptation: a UE with light traffic can be switched to a narrow BWP, reducing power consumption (especially important for battery-constrained devices). Second, they allow UEs with different RF capabilities to share the same wide carrier — a low-capability UE can be assigned a narrow BWP within the carrier. Third, BWPs support the coexistence of different numerologies on one carrier, since each BWP has its own subcarrier spacing and cyclic prefix configuration.
Configuration is performed via RRC signaling: the network configures up to four DL BWPs per serving cell, and one is activated at a time (with the initial BWP used before dedicated configuration). BWP switching can be triggered by DCI, by RRC reconfiguration, or by timers such as the BWP inactivity timer. The RF and performance requirements for operating within a BWP — including channel edge, power spectral density, and demodulation performance — are specified in TS 38.101 (UE radio transmission and reception) and TS 38.133 (requirements for support of radio resource management), with test methods in TS 38.521 and TS 38.533.
The DL BWP concept is tightly coupled with the UL BWP; together they define the UE's operating bandwidth in each direction. In later releases, BWPs became central to features such as RedCap (reduced capability) devices, which operate with narrow BWPs, and to power-saving techniques like BWP switching for connected-mode DRX.
The definition text has remained stable in substance across releases, with only editorial changes to the referenced specification numbering. In Rel-19 the reference was updated to '3GPP TS 38.213 [8]', and in Rel-20 to 'TS 38.213 [3]' — purely editorial citation changes, not changes to the technical concept.
Purpose & Motivation
DL BWPs were created to solve a fundamental tension in 5G NR: carriers are designed to be very wide to deliver high throughput, but not every UE needs or can afford to operate at full carrier width at all times. Without BWPs, a UE would have to monitor the entire carrier bandwidth for control channels, wasting power and limiting flexibility for low-capability devices.
BWPs enable bandwidth adaptation, a key power-saving mechanism: the network can narrow the active BWP when traffic is low and widen it when high throughput is needed. This directly addresses battery life concerns for smartphones and IoT devices. BWPs also allow mixed numerologies on one carrier, supporting diverse services (eMBB, URLLC, mMTC) within the same spectrum.
The concept also future-proofed NR for device diversity: RedCap devices and other reduced-capability UEs can be confined to narrow BWPs, while premium devices use wide BWPs. Previous LTE releases lacked an equivalent flexible per-UE bandwidth mechanism, making NR's BWP framework a significant architectural advance.
What changed in its specifications
The latest release-to-release comparison of specifications that define DL BWP. Each summary describes the whole specification, not only this term.
Rel-19 adds low band carrier aggregation via switching and low-power wake-up receiver (LP-WUR) requirements to TS 38.133. It also adds ATG network support, intra-band non-collocated NR-CA receiver types, and multi-carrier BWP switch and SCell activation delay requirements.
Full comparison in TS 38.133 →Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (1 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.
Studied in Rel-15, normative work from Rel-16.
Defining Specifications
3GPP specifications that define or reference DL BWP, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 38.101 vj40 | UE Radio Transmission and Reception; Satellite Access | Rel-19 read |
| TS 38.133 vk10 | NR Radio Resource Management Requirements | Rel-20 read |
| TS 38.521 vj10 | UE Conformance Spec for NR Satellite Access | Rel-19 read |
| TS 38.533 vj40 | NR UE RRM Conformance Testing | Rel-19 read |