Description
DTM handover (Dual Transfer Mode Handover) is a mobility feature in GSM/GPRS networks that enables a mobile station (MS) operating in Dual Transfer Mode (DTM) to perform a handover from a source cell to a target cell while maintaining both its circuit-switched (CS) and packet-switched (PS) services. DTM itself allows an MS to simultaneously use CS and PS services, such as a voice call and a data session, by allocating dedicated CS resources and shared PS resources. DTM handover extends this capability across cell boundaries, ensuring that the ongoing services are not interrupted when the MS moves.
The handover process is initiated by the network, typically based on measurement reports from the MS. The network sends a DTM HANDOVER COMMAND message to the MS, which contains the allocation of one CS radio resource and PS radio resources applicable to the target cell. The MS then switches to the target cell and continues its CS and PS services. The DTM HANDOVER COMMAND message includes information such as the target cell identity, the CS resource allocation (e.g., timeslot and channel type), and the PS resource allocation (e.g., packet data channel configuration). The MS must be capable of DTM and must have been configured for DTM operation.
DTM handover is specified in 3GPP technical specifications 43.055 (Dual Transfer Mode) and 44.060 (General Packet Radio Service; Mobile Station - Base Station System interface; Radio Link Control/Medium Access Control protocol). These specifications define the message formats, procedures, and requirements for DTM handover. The feature is part of the GERAN (GSM/EDGE Radio Access Network) specifications and is applicable to both GSM and EDGE networks. It is particularly important for services that require simultaneous voice and data, such as voice calls with concurrent email or web browsing.
The implementation of DTM handover involves coordination between the CS and PS domains of the network. The Mobile Switching Centre (MSC) and the Serving GPRS Support Node (SGSN) must exchange information to prepare the target cell for both CS and PS resources. The Base Station System (BSS) manages the radio resources and ensures that the target cell has sufficient capacity. The handover may be intra-BSS or inter-BSS, and in the latter case, signalling between BSSs is required. The DTM HANDOVER COMMAND message is sent over the radio interface using the RR (Radio Resource) protocol for CS and the RLC/MAC protocol for PS.
DTM handover provides significant benefits for users and operators. For users, it ensures that voice calls and data sessions are not dropped when moving between cells, improving the quality of experience. For operators, it enables more efficient use of network resources by allowing simultaneous CS and PS services, which can increase revenue and reduce churn. However, DTM handover also introduces complexity in network planning and resource management, as both CS and PS resources must be available in the target cell. The feature has been supported since Release 8 and continues to be relevant in networks that still support GSM/GPRS, although its importance has diminished with the widespread adoption of LTE and 5G, which natively support simultaneous voice and data through VoLTE and dual connectivity.
Purpose & Motivation
DTM handover was created to address the need for seamless mobility when a mobile station is using both circuit-switched and packet-switched services simultaneously. In earlier GSM networks, a mobile station could either use CS services (e.g., voice) or PS services (e.g., GPRS data), but not both at the same time. With the introduction of DTM, simultaneous CS and PS services became possible, but handover procedures were not designed to handle both domains together. When a DTM-capable MS moved to a new cell, it risked losing one or both services because the handover procedures for CS and PS were separate and could not be coordinated.
DTM handover solves this problem by providing a coordinated handover procedure that allocates both CS and PS resources in the target cell and commands the MS to switch to the new cell while continuing both services. This ensures service continuity and improves the user experience for applications that require simultaneous voice and data, such as voice calls with concurrent data transfer. The feature also enables operators to offer new services, such as push-to-talk with simultaneous data, and to manage network resources more efficiently.
The development of DTM handover was motivated by the growing demand for mobile data services and the need to support them alongside traditional voice services. As GSM networks evolved to support GPRS and EDGE, the ability to handle simultaneous CS and PS services became increasingly important. DTM handover was standardised in 3GPP Release 8, building on earlier work on DTM. Although later technologies like LTE and 5G provide more advanced capabilities, DTM handover remains a relevant feature for legacy GSM/GPRS networks and for scenarios where GSM is still used as a fallback.
What changed in its specifications
The latest release-to-release comparison of specifications that define DTM handover. Each summary describes the whole specification, not only this term.
Rel-9 brings only minor changes to TS 43.055: 0 clauses changed, with no change attributed to a release feature.
Full comparison in TS 43.055 →Rel-18 brings only minor changes to TS 44.060: 0 clauses changed, with no change attributed to a release feature.
Full comparison in TS 44.060 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Initial definition introduced in 3GPP specifications 43.055 and 44.060: "DTM handover is a feature used by the network to command a mobile station to move from its old (source) cell to a new (target) cell while operating in dual transfer mode and continue the operation of its ongoing circuit switched service and one or more of its ongoing packet switched services in the new cell. The mobile station is allocated one circuit switched radio resource and packet switched radio resources applicable to the new cell within a DTM HANDOVER COMMAND message." This established the coordinated handover procedure for DTM-capable mobile stations.
Definition wording was revised for clarity: the text was reformatted (line breaks removed) but the technical content remained identical. The definition still describes the same procedure: the network commands the MS to move to a new cell while in DTM and continue CS and PS services, with resources allocated in the DTM HANDOVER COMMAND message.
Defining Specifications
3GPP specifications that define or reference DTM handover, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 43.055 vj00 | Dual Transfer Mode (DTM) for GSM/GPRS | Rel-19 read |
| TS 44.060 vj00 | GERAN RLC/MAC Protocol Specification | Rel-19 read |