Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

Dynamic attributes

Dynamic Transport Format Attributes

Physical Layer →

Dynamic attributes is a set of transport channel parameters whose values vary between transport formats and can change per TTI under MAC control, complementing Layer 3 semi-static attributes to define how data is mapped onto the physical layer.

Introduced
Rel-8
Where
Radio Access Network
Specifications
2 specs
Dynamic attributes Description Purpose What changed Neighbours Specifications

Description

Dynamic attributes are a concept from the UMTS terrestrial radio access (UTRA) transport channel framework, defined in the transport format and MAC specifications (TS 44.118 for GERAN-to-UTRAN interworking and TS 45.902 for flexible layer one). In UTRA, each transport channel is associated with a set of transport formats, and each transport format is described by a combination of attributes. These attributes are split into two classes: semi-static attributes, whose values are configured by Layer 3 (RRC) and remain constant for the duration of a transport channel configuration, and dynamic attributes, whose values may differ from one transport format to another and may change on a per-TTI (transmission time interval) basis.

The dynamic attributes typically include the transport block size, the transport block set size (the number of transport blocks delivered in a TTI), and the transmission time interval itself. Because these values can vary between transport formats, the network can adapt the instantaneous data rate to the amount of data available in the MAC buffers. The MAC sublayer selects, for each TTI, which transport format to use for each transport channel, thereby controlling the dynamic attributes. This selection is signalled to the receiver through the Transport Format Combination Indicator (TFCI) on the physical control channel, so the receiver knows how to decode the data.

Architecturally, the dynamic attributes sit at the boundary between the MAC sublayer and the physical layer. Layer 3 (RRC) configures the set of allowed transport formats and their attribute values, but the actual choice of transport format per TTI is a MAC decision driven by scheduling and buffer status. The physical layer then applies the selected attributes when performing channel coding, rate matching, and mapping to the physical channels. This separation of configuration (Layer 3) from per-TTI selection (MAC) is the key design principle.

In the GERAN context covered by TS 44.118 and TS 45.902, the same concept appears in the flexible layer one (FL1) framework, where transport formats and their dynamic attributes are negotiated to allow GERAN to carry packet data with variable rates. The dynamic attributes allow the radio interface to support variable-bit-rate services efficiently, since the transport format can be changed every TTI without renegotiating the whole channel configuration.

The concept is foundational for understanding how UTRA and GERAN achieve rate adaptation. It explains why transport format combination selection is a MAC function and why the TFCI exists on the physical layer. Although later technologies such as LTE and NR replaced transport formats with more flexible scheduling and MCS-based link adaptation, the dynamic-attribute concept remains a useful reference for understanding the evolution of rate control in 3GPP systems.

Purpose & Motivation

Dynamic attributes exist to allow the radio interface to adapt the instantaneous data rate of a transport channel without reconfiguring the channel. In early circuit-switched and low-rate packet systems, the data rate was largely fixed by the channel configuration. As packet data services emerged, the network needed a way to match the transmitted rate to the bursty nature of data traffic, where the amount of data available in the MAC buffer varies from TTI to TTI.

By separating attributes into semi-static (configured by Layer 3) and dynamic (selected per TTI by MAC), 3GPP created a mechanism where the expensive reconfiguration signalling is avoided while still permitting fast rate adaptation. The set of transport formats defines the envelope of possible rates, and MAC selects within that envelope based on buffer occupancy and scheduling decisions. This solves the problem of over-provisioning radio resources for bursty traffic and improves spectral efficiency.

The concept also enables multiplexing of multiple transport channels onto a single physical channel through transport format combination selection, where the dynamic attributes of each channel are chosen jointly so that the total rate fits the physical channel capacity. This was essential for supporting simultaneous voice and data services in UMTS.

What changed in its specifications

The latest release-to-release comparison of specifications that define Dynamic attributes. Each summary describes the whole specification, not only this term.

TS 44.118Rel-5 → Rel-6

Generic Access to A/Gb Interface defines MS actions for radio bearer mapping, transport format set and combination handling, and transport channel deletion; adds IEs for mapping, interleaving, mode, and transport channel identity.

Full comparison in TS 44.118 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-8 Initial

Initial definition established: dynamic attributes are the transport format attributes whose values differ among transport formats, are configured by Layer 3, and can change on a TTI basis under MAC control.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Defining Specifications

3GPP specifications that define or reference Dynamic attributes, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 44.118 vg00 Radio Resource Control (RRC) Protocol for Iu Mode Rel-16 read
TR 45.902 vj00 Flexible Layer One (FLO) for GERAN Rel-19 read