Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

EGPRS2-A

Enhanced General Packet Radio Service Phase 2 - Level A

Radio Access Network →

EGPRS2-A is a GERAN packet data enhancement introduced in 3GPP Rel-7 that defines higher-order modulation and coding schemes (MCS/UAS/DAS) for uplink and downlink, boosting GPRS/EDGE throughput without changing the core network.

Introduced
Rel-8
Where
Radio Access Network
Specifications
2 specs
EGPRS2-A Description Purpose What changed Neighbours Specifications

Description

EGPRS2-A (Enhanced General Packet Radio Service Phase 2, Level A) is a GERAN radio interface feature standardized in 3GPP Release 8 and specified primarily in TS 44.060 (RLC/MAC protocol) and TS 51.021 (radio transmission and reception). It extends the legacy EGPRS (EDGE) packet data concept by introducing new modulation and coding schemes (MCS) and new uplink/downlink coding schemes designated UAS (Uplink Adaptive Scheme) and DAS (Downlink Adaptive Scheme). The 'A' level denotes the first of two EGPRS2 levels (A and B); Level A focuses on higher-order modulation (16-QAM and 32-QAM) combined with turbo coding to increase peak and average throughput while retaining backward compatibility with existing GPRS/EDGE terminals.

Architecturally, EGPRS2-A operates entirely within the GERAN radio access network. The BSS (Base Station Subsystem), comprising the BTS and BSC, schedules packet data on PDTCH (Packet Data Traffic Channel) using the new MCS/UAS/DAS schemes. In the uplink, the standard defines MCS-1 to MCS-6 plus PDTCH/UAS-7 to UAS-11; in the downlink, MCS-1 to MCS-4 plus PDTCH/DAS-5 to DAS-12. Legacy MCS-7 and MCS-8 may still be used in the downlink when the USF (Uplink State Flag) or PAN (Paging/Access Notification) is addressed to EGPRS mobile stations, ensuring coexistence with pre-Rel-8 devices. The RLC/MAC layer performs link adaptation, selecting the appropriate MCS/UAS/DAS based on radio link quality reports (e.g., BEP - Bit Error Probability) and HARQ-like retransmission mechanisms.

How it works: The transmitter applies the selected modulation (GMSK, 8-PSK, 16-QAM, or 32-QAM) and channel coding (convolutional or turbo coding) to the RLC data blocks. The receiver demodulates and decodes, using soft-information combining for retransmissions. EGPRS2-A introduces a new burst format and training sequence set to support the higher-order modulations, and the BSS signals the chosen scheme via downlink control channels (e.g., the RLC/MAC header). The mobile station reports its capability (which MCS/UAS/DAS it supports) during attach and PDP context activation, allowing the network to adapt.

Key components include the BTS (which hosts the physical layer and RF), the BSC (which manages radio resources and scheduling), the SGSN/GGSN (packet core, unchanged by EGPRS2-A), and the mobile station (MS). EGPRS2-A does not require changes to the core network; it is a radio-level enhancement. Its role is to provide higher data rates and spectral efficiency in GERAN networks, bridging the gap between EDGE and early UMTS/HSPA, and enabling operators to offer better mobile broadband before full 3G/4G deployment.

EGPRS2-A remains specified through Rel-19, with the definition text unchanged since Rel-8 (minor editorial reformatting in Rel-17). It is part of the broader EGPRS2 framework, which also includes EGPRS2-B (using 32-QAM and 64-QAM with turbo coding for even higher throughput).

Purpose & Motivation

EGPRS2-A was created to address the growing demand for higher packet data rates in GSM/EDGE networks in the mid-2000s, before UMTS/HSPA and LTE were widely deployed. Legacy EGPRS (EDGE) topped out at roughly 384 kbps using 8-PSK and MCS-1 to MCS-9; operators needed a way to extract more capacity from their existing GERAN spectrum without replacing infrastructure. EGPRS2-A introduces 16-QAM and 32-QAM with turbo coding, significantly increasing spectral efficiency and peak rates while maintaining backward compatibility with older EGPRS terminals.

The feature solves the problem of limited throughput and capacity in GERAN, which was still the dominant mobile data technology in many markets. By defining new MCS/UAS/DAS schemes and associated control signaling, EGPRS2-A allows the BSS to adapt link parameters more granularly to radio conditions, improving both cell-edge and cell-center performance. It also provides a migration path for operators who could not immediately deploy 3G, extending the life of their GSM/EDGE investments.

Historically, EGPRS2-A was part of 3GPP Rel-8, which also introduced LTE and SAE. It complemented those efforts by offering a lower-cost upgrade for GERAN-only operators. The 'A' level was designed as a moderate-complexity enhancement, while EGPRS2-B pushed further with higher-order modulation and dual-carrier operation. Together, they represent the final major evolution of GERAN packet data before the focus shifted entirely to LTE and 5G.

What changed in its specifications

The latest release-to-release comparison of specifications that define EGPRS2-A. Each summary describes the whole specification, not only this term.

TS 44.060Rel-17 → Rel-18

Rel-18 brings only minor changes to TS 44.060: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 44.060 →
TS 51.021Rel-11 → Rel-12

Rel-12 added ER-GSM 900 band support for GSM-R with new definitions, frequency bands, channel numbering, and test requirements. It also updated radio measurement and signaling conformance tests.

Full comparison in TS 51.021 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-8 Initial

Initial definition introduced EGPRS2-A as a set of packet traffic channels using MCS-1 to 6 and UAS-7 to UAS-11 in uplink, MCS-1 to 4 and DAS-5 to DAS-12 in downlink, plus related control channels, with MCS-7/MCS-8 allowed in downlink for EGPRS MS when USF or PAN is addressed.

Definition text carried over unchanged from Rel-8; no technical changes to EGPRS2-A.

Definition text carried over unchanged from Rel-8; no technical changes to EGPRS2-A.

Definition text carried over unchanged from Rel-8; no technical changes to EGPRS2-A.

Definition text carried over unchanged from Rel-8; no technical changes to EGPRS2-A.

Definition text carried over unchanged from Rel-8; no technical changes to EGPRS2-A.

Definition text carried over unchanged from Rel-8; no technical changes to EGPRS2-A.

Definition text carried over unchanged from Rel-8; no technical changes to EGPRS2-A.

Definition text carried over unchanged from Rel-8; no technical changes to EGPRS2-A.

Wording changed: the definition was reformatted (line breaks removed) but the technical content remained identical to Rel-8; no functional change.

Definition text carried over unchanged from Rel-17; no technical changes to EGPRS2-A.

Definition text carried over unchanged from Rel-17; no technical changes to EGPRS2-A.

Defining Specifications

3GPP specifications that define or reference EGPRS2-A, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 44.060 vj00 GERAN RLC/MAC Protocol Specification Rel-19 read
TS 51.021 vj00 RF test methods and conformance requirements for GSM BSS Rel-19 read