Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

EMC antenna port

Electromagnetic Compatibility Antenna Port

Physical Layer →

EMC antenna port is an RF connector designated as an antenna port for electromagnetic compatibility testing, providing a defined reference point for measuring radiated and conducted emissions and immunity in 5G NR and LTE equipment.

Introduced
Rel-15
Where
Radio Access Network › NG-RAN (5G)
Specifications
2 specs
EMC antenna port Description Purpose Neighbours Specifications

Description

The EMC antenna port is a concept introduced in 3GPP Release 15 within the context of electromagnetic compatibility (EMC) requirements for radio equipment. In EMC testing, the antenna port serves as the RF connector that is used as the reference point for evaluating the radio equipment's electromagnetic emissions and immunity. Unlike the logical antenna port concept used in MIMO and physical layer signal processing (which is an abstract representation of a signal path), the EMC antenna port is a physical RF interface—typically a coaxial connector—that allows test equipment to be connected directly to the transceiver for conducted measurements.

The need for a clear definition arose as 5G NR equipment began operating at higher frequency bands (including mmWave) and with advanced antenna systems (AAS) where the antenna is often integrated with the radio unit. In such cases, the traditional antenna port may not be physically accessible. 3GPP therefore defined the EMC antenna port to clarify which RF connector should be used when performing EMC compliance testing according to standards such as CISPR 32 and IEC 61000-6-3. The specifications 37.843 (for NR) and 38.817 (for NR RRM) provide the framework for EMC requirements and the identification of the antenna port for test purposes.

In practice, the EMC antenna port is the connector at which the transmitter output power and receiver input immunity are assessed. For conducted emissions, the port is terminated with a defined load, and the emissions are measured on the power supply lines and the antenna port itself. For radiated emissions, the equipment is tested in an anechoic chamber, and the antenna port may be used to monitor the signal. The definition ensures that different vendors and test houses use the same reference point, leading to repeatable and comparable EMC test results.

The EMC antenna port is particularly relevant for base station equipment (BS) and user equipment (UE) that have external antenna connectors. For integrated antenna systems, the EMC requirements may be specified at the radiated interface instead, but the concept of an antenna port remains as a logical reference. The term is also used in the context of EMC immunity tests, where interfering signals are injected at the antenna port to verify that the receiver maintains performance.

Overall, the EMC antenna port is a foundational concept for ensuring that 5G and LTE equipment meet regulatory EMC requirements. It bridges the gap between the abstract antenna port used in radio specifications and the physical connector used in compliance testing, enabling a consistent approach to EMC certification across the industry.

Purpose & Motivation

The EMC antenna port was defined to provide a clear, unambiguous reference point for electromagnetic compatibility testing of radio equipment. Prior to its introduction, EMC test standards often referred to the 'antenna port' without distinguishing between the logical antenna port used in MIMO processing and the physical RF connector. This ambiguity led to inconsistent test setups and results, especially as equipment became more integrated with advanced antenna systems where the antenna is not separable from the radio.

By defining the EMC antenna port as the RF connector used for EMC measurements, 3GPP aimed to harmonize test methodologies across different equipment types and frequency bands. This is particularly important for 5G NR, which operates in a wide range of frequencies, including mmWave, where traditional conducted testing at the antenna port may not be feasible. The definition also supports the growing trend of over-the-air (OTA) testing, where the antenna port may be used as a monitoring point rather than an injection point.

Furthermore, the EMC antenna port concept helps manufacturers and test laboratories apply the correct limits and test procedures, reducing the risk of non-compliance and facilitating global market access. It is a key element in the regulatory approval process for cellular devices, ensuring that they do not interfere with other electronics and are immune to external electromagnetic disturbances.

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-15 Initial

Initial definition introduced the EMC antenna port as the RF connector referred to as antenna port in EMC requirements, establishing a clear reference point for EMC compliance testing of 5G NR equipment.

Defining Specifications

3GPP specifications that define or reference EMC antenna port, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 37.843 vf70 AAS BS Radiated RF Requirement Background Rel-15 read
TS 38.817 3GPP TR 38.817 Rel-15 read