Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Protocol

Empty Transport Format

Empty Transport Format

Protocol →

Empty Transport Format is a transport format that carries no transport block, indicating an inactive transport channel, used in UMTS and LTE to signal the absence of data on a transport channel, enabling efficient multiplexing and power control.

Introduced
Rel-8
Where
Radio Access Network
Specifications
2 specs
Empty Transport Format Description Purpose What changed Neighbours Specifications

Description

In 3GPP cellular systems, the transport format defines how data is transmitted over a transport channel, including parameters such as transport block size, modulation scheme, and coding rate. An Empty Transport Format (ETF) is a special case where no transport block is carried over the transport channel, meaning the transport channel is effectively inactive for that transmission time interval (TTI).

The ETF is used primarily in the context of multiplexing multiple transport channels onto a single physical channel. When a transport channel has no data to send, the system can signal an empty transport format to indicate that the channel is inactive, rather than allocating resources for a zero-size transport block. This allows the receiver to know that no data is present and to avoid unnecessary processing. In GERAN, the transport format combination (TFC) selection process considers ETFs to optimize the use of physical resources and to control interference.

In operation, the ETF is part of the transport format set (TFS) configured for each transport channel. The TFS includes both non-empty formats (with various transport block sizes) and the empty format. During each TTI, the medium access control (MAC) layer selects a transport format combination (TFC) from the configured set, which may include empty formats for some or all transport channels. The selected TFC is then used by the physical layer to determine the coding and modulation. When an ETF is selected, no data is transmitted on that transport channel, but the physical channel may still carry other transport channels' data or control information.

The ETF is particularly important for discontinuous transmission (DTX) and for power control. By signaling an empty format, the transmitter can reduce its output power or turn off the transmitter for that TTI, leading to power savings and reduced interference. The receiver, knowing that the transport channel is inactive, can skip decoding and save processing power. This is especially beneficial for bursty traffic such as web browsing or signaling, where data is not continuously present.

In summary, the Empty Transport Format is a fundamental concept in 3GPP transport channel multiplexing, enabling efficient resource utilization and power management by explicitly signaling the absence of data on a transport channel. Its definition has remained stable since Release 8, reflecting its enduring role in legacy GERAN and UMTS systems.

Purpose & Motivation

The Empty Transport Format was created to address the need for efficient multiplexing of multiple transport channels onto shared physical resources in 3GPP systems. In early UMTS and GERAN networks, transport channels often carry bursty traffic, and continuously allocating resources for zero-size transport blocks would be wasteful. The ETF provides a standardized way to signal that a transport channel is inactive, allowing the transmitter to reduce power and the receiver to avoid unnecessary decoding.

Prior to the ETF, systems might have used implicit detection or fixed allocations, which were inflexible and inefficient. The ETF enables dynamic adaptation to traffic variations, improving spectral efficiency and reducing interference. It also supports power control mechanisms by allowing the transmitter to turn off when no data is present, which is crucial for battery-powered devices and for minimizing uplink interference.

The ETF concept has been carried forward through multiple releases because it remains relevant for GERAN and UMTS networks, which are still deployed globally for IoT and legacy voice services. Its stability in the specifications demonstrates its effectiveness and the importance of backward compatibility in 3GPP standards.

What changed in its specifications

The latest release-to-release comparison of specifications that define Empty Transport Format. Each summary describes the whole specification, not only this term.

TS 44.118Rel-5 → Rel-6

Generic Access to A/Gb Interface defines MS actions for radio bearer mapping, transport format set and combination handling, and transport channel deletion; adds IEs for mapping, interleaving, mode, and transport channel identity.

Full comparison in TS 44.118 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-8 Initial

Initial definition introduced the Empty Transport Format as a transport format that carries no transport block, indicating an inactive transport channel. This enabled efficient multiplexing and power control in GERAN and UMTS systems.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Defining Specifications

3GPP specifications that define or reference Empty Transport Format, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 44.118 vg00 Radio Resource Control (RRC) Protocol for Iu Mode Rel-16 read
TR 45.902 vj00 Flexible Layer One (FLO) for GERAN Rel-19 read