Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

First U2N Relay UE

First User Equipment-to-Network Relay User Equipment

Radio Access Network →

First U2N Relay UE is an intermediate UE that relays traffic between a parent UE and a remote UE in multi-hop Layer 2 UE-to-Network relay communication, introduced in Rel-19 to extend network coverage via UE relaying.

Introduced
Rel-19
Where
Radio Access Network › NG-RAN (5G)
Specifications
5 specs
First U2N Relay UE Description Purpose What changed Neighbours Specifications

Description

The First U2N Relay UE (First User Equipment-to-Network Relay User Equipment) is a concept introduced in 3GPP Release 19 to support multi-hop Layer 2 (L2) UE-to-Network (U2N) relay communication. In this architecture, a U2N Remote UE can connect to the network via one or more intermediate relay UEs. The First U2N Relay UE is a specific type of Intermediate U2N Relay UE that has both a PC5 connection to a parent UE and a PC5 connection to a U2N Remote UE, thereby serving the remote UE in a multi-hop chain. The term "first" indicates its position in the relay chain relative to the remote UE, though the exact numbering convention may vary.

In multi-hop L2 U2N relay, the remote UE establishes a PC5 link with an intermediate relay UE, which in turn connects to another relay or directly to the network. The First U2N Relay UE acts as the first hop from the remote UE's perspective, forwarding traffic between the remote UE and the next hop (parent UE). This allows coverage extension beyond the direct range of a single relay. The relay operates at Layer 2, meaning it forwards user plane data and possibly control plane signaling without terminating the NAS or RRC protocols, which are handled end-to-end between the remote UE and the network.

A key characteristic of the First U2N Relay UE in Rel-19 is that it must first establish a connection to the network before it can begin relaying traffic for connected U2N Remote UEs. This ensures that the relay has a stable backhaul link and can provide reliable service. The relay UE performs discovery and connection establishment procedures with both the remote UE and its parent UE, and it maintains context information to route packets correctly. The network manages the relay chain through control signaling, and the relay may report link quality and status to assist in path management.

The specifications covering this term include TS 38.300 (NR overall description), TS 38.304 (UE procedures in idle and inactive mode), TS 38.331 (RRC protocol), TS 38.401 (NG-RAN architecture), and TS 38.473 (F1AP). These specs define the procedures for relay discovery, connection setup, and data forwarding. The First U2N Relay UE is part of the broader 5G Proximity Services (ProSe) and relay enhancements in Rel-19, which aim to improve coverage and reliability for public safety and commercial applications.

In summary, the First U2N Relay UE is a key enabler for multi-hop UE-to-Network relaying in 5G, allowing remote UEs to reach the network through a chain of relays. Its introduction in Rel-19 reflects the ongoing evolution of 5G to support flexible and resilient connectivity.

Purpose & Motivation

The First U2N Relay UE was introduced to enable multi-hop UE-to-Network relay communication in 5G networks, extending coverage and improving resilience. Prior to Rel-19, UE-to-Network relaying in 3GPP (from Rel-13 onwards for LTE, and Rel-17 for NR) primarily supported single-hop relay, where a remote UE connects to the network via one relay UE. However, in challenging environments such as deep indoor, underground, or disaster-struck areas, a single relay may not be sufficient to reach the network. Multi-hop relaying allows a chain of UEs to extend coverage further, with each hop bridging the gap.

The First U2N Relay UE specifically addresses the need for an intermediate node that can connect a remote UE to a parent UE, forming the first link in a multi-hop chain. The requirement that it establishes a network connection before relaying ensures that the relay has a valid backhaul and can provide reliable service. This concept is particularly relevant for public safety scenarios, where infrastructure may be damaged, and for commercial use cases like wearable devices or IoT devices that need extended range. The introduction in Rel-19 builds on the foundation of single-hop relay and ProSe enhancements, reflecting the maturation of 5G relay technology.

What changed in its specifications

The latest release-to-release comparison of specifications that define First U2N Relay UE. Each summary describes the whole specification, not only this term.

TS 38.300Rel-18 → Rel-19

Rel-19 adds multi-hop L2 UE-to-Network relay for NR sidelink as the largest item. It also adds low-power wake-up signal and receiver (LP-WUS/WUR) text, on-demand SSB and SIB1 for network energy savings, and sub-band full duplex for TDD carriers.

Full comparison in TS 38.300 →
TS 38.304Rel-18 → Rel-19

Rel-19 adds TS 38.304 definitions for multi-hop L2 UE-to-Network sidelink relay roles, including child, parent, intermediate, first and last relay UEs. It also adds paging and system information handling for relays, and NTN IoT Phase 3 text on PLMN access technology restrictions and cell categories.

Full comparison in TS 38.304 →

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-19 Initial

Initial definition introduced: an Intermediate U2N Relay UE having both PC5 connection to a parent UE and PC5 connection to a U2N Remote UE for serving the U2N Remote UE in case of multi-hop L2 U2N Relay communication. In this release, a first U2N Relay UE first establishes a connection to the network before beginning to relay traffic for connected U2N Remote UEs.

Defining Specifications

3GPP specifications that define or reference First U2N Relay UE, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.300 vj40 NR and NG-RAN Overall Description Rel-19 read
TS 38.304 vj30 NR UE Idle and Inactive State Procedures Rel-19 read
TS 38.331 vj40 NR Radio Resource Control (RRC) Rel-19 read
TS 38.401 vj30 NG-RAN Architecture Description Rel-19 read
TS 38.473 vj40 F1 Application Protocol (F1AP) Rel-19 read