Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Protocol

FRER

Frame Replication and Elimination for Reliability

Protocol →

FRER is a deterministic networking mechanism standardized in 3GPP Release 16 that replicates frames across multiple paths and eliminates duplicates at the receiver, providing seamless redundancy for time-sensitive and ultra-reliable 5G services.

Introduced
Rel-16
Where
Services
Specifications
2 specs
FRER Description Purpose Neighbours Specifications

Description

Frame Replication and Elimination for Reliability (FRER) is a reliability mechanism originally developed in IEEE 802.1CB and adopted into the 3GPP ecosystem in Release 16 to support Ultra-Reliable Low-Latency Communication (URLLC) and Time-Sensitive Networking (TSN) services in the 5G System. FRER provides seamless redundancy by transmitting copies of the same frame over multiple disjoint paths through the network and eliminating duplicate copies at the destination. This ensures that if one path fails or experiences excessive delay, the frame still arrives via an alternative path, with no interruption to the application.

In the 3GPP architecture, FRER is applied within the 5G System as part of the integration of TSN and deterministic networking capabilities. The 5G System can act as a TSN bridge, and FRER is one of the mechanisms used to meet the stringent reliability requirements of industrial automation, automotive, and other vertical applications. The mechanism operates at the link layer (Layer 2) and is transparent to upper-layer protocols. Each frame is assigned a sequence number by the replication function, and the elimination function at the receiver uses this sequence number to discard duplicates and deliver frames in order.

The key components of FRER are the sequence generation function, the replication function, and the elimination function. The sequence generation function assigns a sequence number to each frame. The replication function creates multiple copies of the frame and forwards them over different paths. The elimination function at the receiving end tracks the sequence numbers it has seen and discards any frame whose sequence number has already been received, while forwarding new frames to the upper layers. This design provides hitless redundancy: the failure of a single path does not cause frame loss or reordering visible to the application.

FRER is closely related to the concept of redundant paths in the 5G System. In 3GPP Release 16, the specifications 23.700 (Study on enhancement of 5G System for TSN) and 23.725 (Study on enhancement of 5G System for supporting TSN) describe how the 5G System can support FRER, including the mapping of FRER functions to 5G network functions and the configuration of redundant paths. The 5G System can provide two or more independent paths, for example via dual connectivity or via redundant user plane paths, and FRER operates over these paths to provide seamless redundancy.

The mechanism is particularly valuable for applications that cannot tolerate packet loss or interruption, such as motion control in factories, power grid protection, and autonomous driving. By combining the reliability of multiple paths with the efficiency of duplicate elimination, FRER provides a high level of reliability without requiring the application to manage redundancy itself. It also supports the integration of 5G with wired TSN networks, where FRER is a native IEEE 802.1 feature, enabling end-to-end deterministic and reliable communication across converged networks.

Purpose & Motivation

FRER exists to provide seamless, hitless redundancy for mission-critical and time-sensitive applications. Traditional reliability mechanisms such as retransmission (ARQ/HARQ) introduce latency and are unsuitable for applications with strict latency bounds. Path redundancy without elimination would cause duplicate packets, which can confuse applications and waste bandwidth. FRER solves both problems by replicating frames across multiple paths and eliminating duplicates at the receiver, achieving high reliability with bounded latency.

The motivation for standardizing FRER in 3GPP Release 16 came from the convergence of 5G with Time-Sensitive Networking (TSN) and the industrial internet. Vertical industries such as manufacturing, energy, and transportation require deterministic, ultra-reliable communication. IEEE 802.1FRER was already established in the wired TSN world, and 3GPP needed to define how the 5G System could support it so that 5G could serve as a TSN bridge or as an end-to-end deterministic network. The Release 16 studies in 23.700 and 23.725 addressed the architectural aspects of this integration.

FRER also addresses the limitations of single-path reliability. In a single-path network, any failure causes an interruption. With FRER, the failure of one path is masked by the other path, and the elimination function ensures that the application sees a continuous, in-order stream of frames. This is essential for closed-loop control systems where even a brief interruption can cause instability or safety issues.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-16 Initial

Initial introduction of FRER support in the 5G System, studied in 23.700 and 23.725, defining how the 5G System can provide redundant paths and support FRER for TSN and URLLC services.

The term carried over unchanged in its core definition; Release 18 continued to reference FRER within the broader deterministic networking and TSN framework without redefining the mechanism itself.

Defining Specifications

3GPP specifications that define or reference FRER, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.700 vk10 AI/ML Application Layer Support Phase 2 Rel-20 read
TS 23.725 vg20 Study on URLLC Architecture Enhancements Rel-16 read