Description
The Hybrid requirements set is a concept introduced in 3GPP Release 15 within the RF performance specifications for base stations (BS). It defines the complete set of requirements applicable to a hybrid Active Antenna System (AAS) base station, which is a BS architecture that includes both conducted ports and a radiated antenna array. Unlike traditional base stations that are tested purely via conducted connections, or fully integrated AAS BS that are tested purely over the air (OTA), a hybrid AAS BS requires a combination of both conducted and radiated requirements to fully characterize its RF performance.
The hybrid AAS BS architecture consists of a base station unit with conducted interfaces (e.g., antenna connectors) as well as an integrated antenna array. This allows for flexible deployment and testing. The hybrid requirements set therefore includes conducted requirements (such as output power, frequency error, EVM) applied at the conducted ports, and radiated requirements (such as OTA output power, OTA sensitivity, OTA selectivity) applied to the radiated interface. The set is defined in 3GPP specifications such as TS 37.105 (Active Antenna System (AAS) Base Station (BS) transmission and reception) and TS 37.145 (Active Antenna System (AAS) Base Station (BS) conformance testing).
The requirements set is structured to ensure that the hybrid AAS BS meets the same overall performance targets as other BS types, while accounting for the specific architecture. For example, the conducted requirements ensure that the base station unit generates the correct signal at its ports, while the radiated requirements ensure that the antenna array radiates the signal with the correct spatial characteristics, including beamforming capabilities. The hybrid approach allows manufacturers to test the conducted portion separately from the radiated portion, which can simplify testing and reduce cost, while still guaranteeing end-to-end performance.
In the 3GPP conformance testing framework, the hybrid requirements set is used to define the test cases and test configurations for hybrid AAS BS. The test specifications (e.g., TS 37.145) detail the test procedures for both conducted and radiated requirements, including the test setups, measurement methods, and acceptance criteria. The hybrid requirements set is also referenced in other specifications such as TR 37.843 (Radio Frequency (RF) requirement background for Active Antenna System (AAS) Base Station (BS) radiated requirements) and TR 37.941 (Radio Frequency (RF) requirement background for Active Antenna System (AAS) Base Station (BS) conducted requirements), which provide background and rationale for the requirements.
The concept of hybrid requirements set has evolved across releases. In Release 15, it was introduced to address the growing deployment of AAS BS and the need for a unified requirements framework. Subsequent releases (16, 17, 18, 19) have maintained the definition, with possible updates to the specific requirements values and test methods as new frequency bands and features are added. The hybrid requirements set is essential for ensuring that hybrid AAS BS can be deployed in mobile networks without causing interference or performance degradation, and it supports the global harmonization of RF requirements for 5G and beyond.
Purpose & Motivation
The Hybrid requirements set was created to address the challenges of testing and certifying Active Antenna System (AAS) base stations that have both conducted ports and integrated antennas. Traditional base stations were tested entirely via conducted connections, but AAS BS with integrated antennas cannot be fully tested this way because the antenna is part of the system. Conversely, fully radiated testing of AAS BS is complex and expensive. The hybrid approach allows a mix of conducted and radiated tests, providing a pragmatic solution that ensures performance while minimizing test complexity. This was motivated by the need to deploy AAS BS in 5G networks, where beamforming and massive MIMO are essential, and to ensure that these advanced antennas meet regulatory and performance requirements. The hybrid requirements set also enables manufacturers to design base stations with separate antenna units, facilitating installation and maintenance. It addresses the limitations of previous approaches that either ignored radiated aspects or required full OTA testing, which was not feasible for all deployments.
What changed in its specifications
The latest release-to-release comparison of specifications that define Hybrid requirements set. Each summary describes the whole specification, not only this term.
Extended OTA BS testing to 43.5–48.2 GHz; added new measurement/uncertainty clauses; revised procedures.
Full comparison in TR 37.941 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Initial definition introduced: a complete set of requirements applied to a hybrid AAS BS with both conducted and radiated requirements. This established the framework for testing hybrid AAS base stations, addressing the need for a unified approach to RF performance and conformance.
Defining Specifications
3GPP specifications that define or reference Hybrid requirements set, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 37.105 vj40 | AAS Base Station Radio Requirements | Rel-19 read |
| TS 37.145 vj40 | AAS Base Station Radiated Requirements | Rel-19 read |
| TR 37.843 vf70 | AAS BS Radiated RF Requirement Background | Rel-15 read |
| TR 37.941 vj20 | RF Conformance Testing Background for Radiated BS Requirements | Rel-19 read |
| TS 38.817 | 3GPP TR 38.817 | Rel-15 read |