Description
The IAB-MT channel bandwidth is a radio frequency (RF) requirement defined for the Mobile Termination (MT) part of an Integrated Access and Backhaul (IAB) node in 3GPP NR specifications. An IAB node consists of two logical functions: the IAB-DU (Distributed Unit), which serves UEs and child IAB nodes like a base station, and the IAB-MT, which acts as a UE towards a parent IAB node or donor gNB. The IAB-MT channel bandwidth specifies the RF bandwidth that supports a single IAB-MT RF carrier, with the transmission bandwidth configured in either the uplink or downlink direction. This parameter is fundamental for defining the radio frequency capabilities and performance requirements of the IAB node's backhaul connection.
The channel bandwidth is closely tied to the operating band and the subcarrier spacing (SCS) used by the IAB-MT. It determines the maximum transmission bandwidth configuration (the number of resource blocks) that can be scheduled for the backhaul link. The IAB-MT must support the channel bandwidths defined for the operating band in which it operates, and these are specified in 3GPP TS 38.174 (for FR1) and TS 38.176 (for FR2). The channel bandwidth directly impacts the achievable data rate and spectral efficiency of the backhaul link, which in turn affects the overall capacity of the IAB node's access links.
In the architecture, the IAB-MT channel bandwidth is used by the parent node (donor gNB or another IAB node) for resource allocation and by the IAB node for RF tuning and measurement. The IAB-MT must be able to operate on the same channel bandwidth as the parent node's access link to ensure compatibility. The channel bandwidth also influences the design of the IAB node's transceiver, including filters, power amplifiers, and baseband processing. Since IAB nodes are expected to be deployed in various scenarios, including dense urban and rural areas, the supported channel bandwidths must cover the typical NR channel bandwidths (e.g., 5, 10, 20, 40, 50, 100 MHz in FR1 and 50, 100, 200, 400 MHz in FR2).
The IAB-MT channel bandwidth is defined in the RF specifications along with other parameters such as the IAB-MT RF bandwidth, which encompasses the total RF bandwidth for single or multiple carriers. The channel bandwidth is a per-carrier parameter, while the RF bandwidth is the overall bandwidth the IAB-MT can transmit or receive. This distinction is important for carrier aggregation scenarios where the IAB-MT may support multiple carriers within its RF bandwidth. The channel bandwidth also affects the IAB-MT's ability to perform measurements and cell selection, as the synchronization signals and reference signals must be received within the channel bandwidth.
In summary, the IAB-MT channel bandwidth is a key RF parameter that defines the per-carrier bandwidth for the backhaul link of an IAB node. It ensures that the IAB node can communicate with its parent node using the configured transmission bandwidth, and it is essential for the design and performance evaluation of IAB deployments in 5G networks.
Purpose & Motivation
The IAB-MT channel bandwidth exists to define the RF bandwidth requirements for the mobile termination function of an IAB node, ensuring that the backhaul link can support the necessary transmission bandwidth. It solves the problem of specifying how much spectrum an IAB node can use for its wireless backhaul connection to a parent node, which is critical for achieving high-capacity backhaul without fiber. Before IAB was introduced in Rel-16, backhaul was typically provided via fiber or dedicated microwave links, which are costly and time-consuming to deploy. IAB enables wireless self-backhauling, and the channel bandwidth parameter ensures that the IAB-MT can operate within the allocated spectrum and meet performance requirements.
The parameter also addresses the need for flexibility in deployment scenarios. IAB nodes may be deployed in different frequency bands and with different available bandwidths. By defining the channel bandwidth per carrier, the standard allows IAB nodes to adapt to various spectrum allocations while maintaining compatibility with the parent node. This is particularly important for FR2 where wider bandwidths are available, enabling high-capacity backhaul.
Furthermore, the IAB-MT channel bandwidth is essential for regulatory compliance and interference management. It ensures that the IAB node's transmissions are confined within the licensed channel bandwidth and meet the spectral emission requirements. This allows IAB to coexist with other NR and LTE transmissions in the same band.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Introduced the definition of IAB-MT channel bandwidth as part of the initial IAB specification. It established the RF bandwidth supporting a single IAB-MT RF carrier with the transmission bandwidth configured in the uplink or downlink, enabling wireless backhaul for NR.
Defining Specifications
3GPP specifications that define or reference IAB-MT channel bandwidth, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 38.174 vk00 | NR Integrated Access and Backhaul Requirements | Rel-20 read |
| TS 38.176 vj40 | IAB Conformance Testing | Rel-19 read |