Description
Immediate messaging is a type of IMS Messaging service defined in 3GPP specifications 22.340 (IMS Messaging) and 26.141 (IMS Messaging Media Handling and Interaction). It is characterised by the sender's expectation that the message will be delivered in a near-real-time fashion. This expectation shapes both the user experience and the technical handling of the message within the IMS architecture.
The IMS Messaging framework, specified in 22.340, defines a family of messaging services that can be built on the IP Multimedia Subsystem. These include Immediate Messaging, Session-based Messaging, and Deferred Messaging. Immediate messaging is the most latency-sensitive of these: the sender expects the message to reach the recipient promptly, much like a chat message in modern applications. The service is typically implemented using the Message Session Relay Protocol (MSRP) or SIP MESSAGE, depending on whether a session is established. 26.141 specifies the media handling and interaction details, including how MSRP is used for immediate messaging sessions.
Architecturally, immediate messaging leverages the IMS core: the UE registers with the IMS network, and messages are routed through the Serving-CSCF and Application Servers as needed. For page-mode messaging, SIP MESSAGE can be used to deliver a single message without establishing a session. For session-mode messaging, an MSRP session is established between the parties, allowing a stream of messages with low latency. The choice between these modes depends on operator policy and the specific service.
The key differentiator from deferred messaging is the delivery expectation. Deferred messaging, such as Multimedia Messaging Service (MMS), uses a store-and-forward model where the message may be stored in a network entity and delivered later. Immediate messaging, by contrast, assumes that both parties are reachable and that the message is delivered essentially in real time. This has implications for reliability, charging, and interworking with other messaging systems.
Immediate messaging has been part of the 3GPP toolkit since Release 8 and has remained stable through Release 19. It provides the standards basis for operator-provided instant messaging and chat services, and it interworks with the broader IMS service architecture, including presence and group management. For engineers, understanding immediate messaging is important when designing IMS-based communication services that require low-latency message delivery.
Purpose & Motivation
Immediate messaging exists to standardise near-real-time message delivery within the IMS framework. Before its definition, messaging services were often proprietary or based on store-and-forward models such as SMS and MMS, which introduced delays. As IMS was developed to provide IP-based multimedia services, a standard way to describe and implement low-latency messaging was needed.
The term solves the problem of distinguishing between messaging services with different delivery expectations. By defining immediate messaging as a type where the sender expects prompt delivery, 3GPP enables operators and vendors to build services with appropriate QoS, charging, and interworking behaviour. It also provides a basis for interoperability between IMS networks and between IMS and other messaging systems.
The motivation comes from user demand for instant communication. Chat and instant messaging became popular on the internet, and operators wanted to offer equivalent services over IMS. Immediate messaging provides the standards foundation for those services, ensuring that they can be implemented consistently across vendors and networks while leveraging the IMS core's authentication, routing, and policy capabilities.
What changed in its specifications
The latest release-to-release comparison of specifications that define Immediate messaging. Each summary describes the whole specification, not only this term.
Adds requirements for service-level interworking between IMS messaging and SMS, EMS, MMS, and fixed Internet services.
Full comparison in TS 22.340 →Rel-18 added 3D scenes and assets support, updated video, speech, and audio capabilities, and relaxed several media format requirements for 5G-Advanced messaging media profiles.
Full comparison in TS 26.141 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference Immediate messaging, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 22.340 vj00 | IMS Messaging Stage 1 Requirements | Rel-19 read |
| TS 26.141 vj00 | IMS Messaging & Presence Media Formats | Rel-19 read |