Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

Indirect Network Communication

Indirect Network Communication

Services →

Indirect Network Communication is a 5G ProSe communication mode where a UE reaches the 5G network through a 5G ProSe UE-to-Network Relay instead of a direct connection, extending coverage and enabling service continuity for UEs outside direct coverage.

Introduced
Rel-17
Where
Core Network › 5G Core
Specifications
2 specs
Indirect Network Communication Description Purpose What changed Neighbours Specifications

Description

Indirect Network Communication is one of the two fundamental communication modes defined for 5G ProSe (Proximity Services) in 3GPP Release 17. In this mode, a UE does not communicate directly with the 5G core network over the Uu interface. Instead, it establishes a PC5 sidelink connection to a 5G ProSe UE-to-Network Relay, which in turn maintains the Uu connection to the NG-RAN and the 5G core. The remote UE's traffic is therefore carried over two radio hops: the PC5 link between the remote UE and the relay UE, and the Uu link between the relay UE and the network.

The architecture relies on several key functional entities. The 5G ProSe UE-to-Network Relay is a UE that has been authorized by the network to act as a relay and that maintains a PDU session or connectivity to the 5G core on behalf of remote UEs. The 5G ProSe Remote UE is the UE that uses the relay to access network services. The 5G ProSe Layer-3 UE-to-Network Relay, defined in TS 23.304, forwards traffic at the IP layer, meaning the relay terminates the PC5 link and the Uu link and routes IP packets between them. Control-plane procedures include relay discovery, relay selection and reselection, authorization, and the establishment of the PC5 unicast link used for the relay connection.

From the core network perspective, the remote UE's traffic is carried within the relay UE's PDU session. The 5G core may be aware of the remote UE through ProSe-related subscription and authorization data, and through the relay's service authorization. The SMF and UPF handle the relay UE's PDU session, while the remote UE's IP traffic is multiplexed over that session. This means the remote UE does not necessarily have its own independent PDU session in the core; instead, its connectivity is dependent on the relay UE's session. This design keeps core network impact limited and allows rapid deployment of relay-based coverage extension.

Indirect Network Communication is particularly important for scenarios where a UE is out of network coverage, such as at the cell edge, in coverage holes, or in isolated areas. By using a nearby relay UE that has network coverage, the remote UE can still reach 5G services. Typical use cases include public safety communications, wearables and IoT devices with limited radio capability, and consumer devices that need coverage extension. The mode also supports service continuity when a UE moves between direct and indirect communication, although the procedures for such transitions are limited in Rel-17 and are further studied in later releases.

The term is defined in TS 23.304 (5G ProSe architecture) and TS 23.752 (Study on 5G ProSe). It is closely related to direct network communication, where a UE connects directly to the network, and to the broader 5G ProSe framework that includes UE-to-UE relay communication. In Rel-18, Rel-19, and Rel-20 the definition text remained unchanged, indicating that the fundamental concept of indirect network communication has been stable since its introduction, even as other aspects of ProSe, such as multi-hop relay and enhanced relay selection, have evolved.

Purpose & Motivation

Indirect Network Communication exists to extend 5G network coverage and service availability to UEs that cannot maintain a direct Uu connection to the NG-RAN. Before 5G ProSe, coverage extension was typically achieved through fixed infrastructure such as repeaters or small cells, which are costly and inflexible. UE-to-Network relaying leverages the mobility and ubiquity of UEs to provide on-demand coverage extension without additional network deployment.

The concept addresses several limitations. First, UEs at the cell edge or in coverage holes experience poor signal quality and may lose connectivity; a relay UE with better channel conditions can bridge the gap. Second, certain devices, such as wearables or low-power IoT devices, may have constrained radio capabilities and benefit from relaying to reduce power consumption and complexity. Third, public safety scenarios require communication when infrastructure is unavailable or degraded, and relay-based connectivity can restore service using nearby UEs that still have coverage.

The introduction in Rel-17 was motivated by the need to standardize ProSe for 5G after the earlier LTE-based ProSe work. It provides a normative architecture and procedures that allow operators to authorize and control relay usage, ensuring that indirect communication is secure, accountable, and integrated with 5G core network policies. The stability of the definition across Rel-17 to Rel-20 reflects that the basic relay model has been accepted, while subsequent releases focus on enhancements such as relay discovery, multi-hop, and service continuity.

What changed in its specifications

The latest release-to-release comparison of specifications that define Indirect Network Communication. Each summary describes the whole specification, not only this term.

TS 23.304Rel-18 → Rel-19

Rel-19 adds multi-hop NR sidelink relaying through Intermediate UE-to-Network Relay entities, with discovery, QoS and link handling clauses. It also adds path switching between direct and indirect paths via Layer-2 UE-to-Network Relay, and ProSe support for SNPNs and CAG use in PNI-NPNs.

Full comparison in TS 23.304 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-17 Initial

Initial definition introduced in TS 23.304 and TS 23.752. It establishes the concept of indirect network communication as a mode where a 5G ProSe UE-to-Network Relay sits between a UE and the 5G network, along with the associated architecture, authorization, and discovery procedures.

The definition text carried over unchanged from Rel-17. The term continues to describe the same relay-based communication mode, while other ProSe enhancements may be specified elsewhere.

The definition text remained unchanged from Rel-17 and Rel-18. No revision to the core meaning of indirect network communication is indicated by the quoted definition.

The definition text is unchanged from previous releases. The term retains its Rel-17 meaning in the Rel-20 specifications.

Defining Specifications

3GPP specifications that define or reference Indirect Network Communication, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.304 vk10 5G Proximity Services (ProSe) Stage 2 Rel-20 read
TR 23.752 vh00 5G ProSe Enhancement Study Rel-17 read