Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

L2R

Layer 2 Relay

Radio Access Network →

L2R is a function in the mobile termination and the MSC interworking function that carries asynchronous non-transparent user data over RLP.

Introduced
Rel-5
Where
User Equipment › Protocol Layers (NAS)
Specifications
3 specs
L2R Description Purpose What changed Neighbours Specifications

Description

L2R (Layer 2 Relay) supports asynchronous non-transparent bearer services in GSM and UMTS circuit-switched data. According to 3GPP TS 27.001, clause 6, the L2R function provides for the reliable transportation of known, asynchronous non-transparent user protocols across the radio interface of a PLMN. The L2R functions are located in the Mobile Termination (MT) and in the Interworking Function (IWF) associated with a Mobile Switching Centre (MSC), and they use the services of the Radio Link Protocol (RLP, TS 24.022) to carry the protocol information between the MS and the IWF.

TS 27.001 describes the L2R as three sub-functions: a Non Transparent Protocol (NTP) entity that interfaces the particular user protocol, an L2R protocol entity that interfaces the RLP, and a Relay entity that maps between the two. If applicable, the Relay entity contains the data compression function; negotiable parameters are exchanged with the remote Relay entity by means of the RLP XID frame.

For character-oriented asynchronous services, TS 27.002 specifies the L2R Character Oriented Protocol (L2RCOP), which carries user characters and status information in fixed-length PDUs matching the RLP frame. The L2R also handles flow control and the BREAK condition, and may include ITU-T V.42bis data compression between the MS and the IWF.

Purpose & Motivation

L2R lets non-transparent asynchronous data services run reliably over the radio interface by relaying the user protocol over RLP between the mobile and the network interworking function (3GPP TS 27.001, clause 6).

What changed in its specifications

The latest release-to-release comparison of specifications that define L2R. Each summary describes the whole specification, not only this term.

TS 27.001Rel-4 → Rel-5

Added SCUDIF procedures for service change and fallback between multimedia and speech calls via BC-IEs.

Full comparison in TS 27.001 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-5 Initial

Introduced the initial concept of Layer 2 Relay in the context of UMTS/HSPA. Defined the basic architecture where a Relay Node (RN) connects to a Donor Node via the Uu interface and provides access to UEs. Specified the need for RN-specific measurements and configurations to support the two-hop communication.

The term carried over unchanged into the LTE framework, but the relay concept saw significant enhancement with the introduction of Type 1 and Type 1a relays in LTE-Advanced (Rel-10). These were self-backhauling nodes with their own cell identity, representing a more advanced evolution of the foundational L2R principle.

The core definition of 'Layer 2 Relay' as a term remained unchanged. However, its conceptual underpinnings evolved into the more sophisticated Integrated Access and Backhaul (IAB) architecture for 5G NR, where relay nodes are integrated into the gNB-DU functionality with dynamic resource allocation for backhaul and access.

Defining Specifications

3GPP specifications that define or reference L2R, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 27.001 vj00 Terminal Adaptation Functions for PLMN Rel-19 read
TS 27.002 vj00 Terminal Adaptation Functions for Asynchronous Services Rel-19 read
TS 24.022 vj00 Radio Link Protocol (RLP) for Circuit Switched Data Rel-19 read