Description
Low-Density Parity-Check (LDPC) codes are a class of linear block codes characterized by a sparse parity-check matrix, meaning it contains mostly zeros with a low density of ones. This sparsity is fundamental to its efficient iterative decoding algorithms. In 3GPP 5G New Radio (NR), LDPC codes were selected as the primary channel coding scheme for the data channel (PDSCH and PUSCH), replacing the Turbo codes used in 4G LTE for data. The 5G NR LDPC code design is based on quasi-cyclic (QC) LDPC codes, which offer a good balance between performance and implementation efficiency. The structure is defined by a base graph (BG), of which there are two primary ones defined in the specifications: BG1 and BG2. BG1 is optimized for larger transport blocks and higher code rates, while BG2 is better suited for smaller blocks and lower rates. The encoding process involves expanding the base graph according to a lifting size (Z) to create the final parity-check matrix for a specific code block size. This structured approach allows for highly parallelized decoder implementations, which are crucial for achieving the low latency and high throughput targets of 5G. The decoder typically uses an iterative message-passing algorithm, such as the belief propagation (BP) or min-sum algorithm, which operates on a bipartite graph (Tanner graph) representation of the parity-check matrix. Nodes in this graph exchange probabilistic messages about the likelihood of bits being 0 or 1, converging on a solution over several iterations. This process provides exceptional error-correction capability, especially for the large packet sizes common in high-speed data. The performance of LDPC codes is close to the theoretical Shannon limit, making them a cornerstone technology for achieving the peak data rates and reliability required by 5G NR. Their adoption represented a significant physical layer evolution from previous generations.
Purpose & Motivation
The primary purpose of adopting LDPC codes in 5G NR was to meet the stringent data rate, latency, and reliability requirements defined for IMT-2020. The previous channel coding workhorse for data channels in 3G and 4G was the Turbo code. While revolutionary for its time, Turbo codes presented challenges for the extreme performance targets of 5G, particularly concerning throughput and decoder complexity for very large block sizes. Turbo code decoders can suffer from longer decoding latencies and implementation complexity that scales less favorably with parallelization compared to LDPC. LDPC codes, with their inherent parallelism and superior performance at large block sizes and high code rates, were identified as a more suitable candidate. The decision was also influenced by the need for energy efficiency in base stations and devices; efficient LDPC decoder architectures can reduce power consumption. Furthermore, the quasi-cyclic structure adopted by 3GPP enables efficient hardware implementation using simple shift registers and facilitates flexible rate matching through puncturing and repetition. This addresses the need for a single, versatile coding scheme that can adapt to the diverse requirements of 5G use cases, from enhanced mobile broadband (eMBB) to ultra-reliable low-latency communications (URLLC), without requiring multiple different coding schemes. The introduction of LDPC in Rel-15 was thus a fundamental physical layer innovation to future-proof the air interface.
What changed in its specifications
The latest release-to-release comparison of specifications that define LDPC. Each summary describes the whole specification, not only this term.
Added a profiled FLUTE FDT schema with semantics and versioning, plus 5GMS references and requirements, removing old schema clauses. Updated User Service Bundle Description schema versions and added a new unicast announcement FQDN format.
Full comparison in TS 26.346 →Rel-19 adds sub-band full duplex (SBFD) support to TS 38.212. It introduces UEIRI handling, new SBFD abbreviations and definitions, and SBFD-specific resource counting in PUSCH uplink control information procedures.
Full comparison in TS 38.212 →Technology family
Channel coding schemes · Radio Access Network
Also in this family (introduction release not pinned to a single defining specification): Bi-orthogonal code, Reed-Solomon code, Repetition code
Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.
Detected Changes Across Releases
verified against 3GPP sourcesDocumented changes in 1 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.
LDPC channel coding is specified for the first time in NR, with two base graphs, lifting size sets, parity check matrices, an encoding procedure and rate matching.
- “For a code block encoded by LDPC, the following encoding procedure applies:” TS 38.212 v15.13.0
- “The channel coding scheme for transport blocks is quasi-cyclic LDPC codes with 2 base graphs and 8 sets of parity check matrices” TS 38.201 v15.0.0
- “5.4.2 Rate matching for LDPC code” TS 38.212 v15.13.0
Defining Specifications
3GPP specifications that define or reference LDPC, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 26.346 vj30 | MBMS User Services Specification | Rel-19 read |
| TS 38.201 vj00 | NR Physical Layer General Description | Rel-19 read |
| TS 38.212 vj40 | NR Multiplexing and Channel Coding | Rel-19 read |
| TS 38.300 vj40 | NR and NG-RAN Overall Description | Rel-19 read |
| TR 38.785 vh00 | UE radio transmission for enhanced NR sidelink | Rel-17 read |
| TR 38.802 ve20 | Study on New Radio Access Technology Physical Layer Aspects | Rel-14 read |
| TR 38.868 vh00 | Optimizations of pi/2 BPSK uplink power in NR | Rel-17 read |
| TR 38.886 vg30 | NR V2X UE Radio Transmission & Reception | Rel-16 read |
| TR 38.889 vg00 | NR-based access to unlicensed spectrum study | Rel-16 read |
| TR 38.912 vj00 | Study on New Radio Access Technology | Rel-19 read |