Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

Local Broadcast Area

Local Broadcast Area

Services →

Local Broadcast Area is a geographic area within a broadcast service where the content is identical, allowing one service to deliver different content in different areas for regionalized broadcast delivery.

Introduced
Rel-8
Where
Services
Specifications
2 specs
Local Broadcast Area Description Purpose What changed Neighbours Specifications

Description

A Local Broadcast Area (LBA) is a fundamental concept in 3GPP broadcast and multicast services, defined in TS 22.146 (Multimedia Broadcast/Multicast Service) and TS 22.246 (MBMS user services). It represents a geographic region within which the content of a given broadcast service is identical. The overall service area of a broadcast service can be partitioned into multiple Local Broadcast Areas, each potentially carrying different content — for example, regional news, local advertising, or area-specific emergency information — while still belonging to the same broadcast service identity.

Architecturally, the LBA concept decouples the service identity from the geographic content variation. The broadcast service is identified by a service identifier (e.g., TMGI in MBMS), and the network maps each LBA to a set of cells. The Broadcast Multicast Service Center (BM-SC) and the MBMS-GW coordinate with the MME and eNodeBs/gNodeBs to deliver the appropriate content to each LBA. The LBA boundaries are typically aligned with cell boundaries or groups of cells, so that the radio access network can select the correct content stream per cell without per-user signaling.

In operation, the content provider supplies different content versions to the BM-SC, each tagged with the target LBA. The BM-SC performs service announcement and session control, and the MBMS bearer is established per LBA as needed. Because the content is the same within an LBA, the network can use point-to-multipoint (PTM) transmission efficiently within each area, avoiding the need for unicast duplication. Users moving between LBAs of the same service experience a content change, which is an expected behavior of the service design.

The LBA concept is particularly relevant for public warning systems (PWS), local news distribution, and venue-specific content delivery. It allows operators to use a single broadcast service framework while tailoring information geographically, which is essential for emergency alerts that must be localized (e.g., earthquake early warning for a specific region). The definition has remained stable across Releases 8 through 19, reflecting the maturity and continued relevance of the concept in both LTE and 5G broadcast/multicast (5G MBS) contexts.

From a standards perspective, the LBA is a service-layer concept rather than a radio-layer one. It is referenced in service requirements and architecture specifications, and it informs how MBMS session attributes and service area identifiers are configured. Understanding LBAs is important for engineers designing broadcast services, as it affects content provisioning, bearer setup, and mobility handling for broadcast users.

Purpose & Motivation

The Local Broadcast Area concept exists to solve the problem of delivering location-specific content over a broadcast/multicast service without requiring separate service identities for each region. Before LBA, a broadcast service was typically assumed to have uniform content across its entire service area, which made regionalized delivery inefficient — operators would either need multiple services or resort to unicast for local content. LBA allows a single broadcast service to carry different content in different geographic regions, enabling efficient use of spectrum and network resources for localized information such as regional news, local advertising, and area-specific public warnings.

Historically, the motivation became prominent with the introduction of MBMS in 3GPP Release 6/7 and its evolution in Release 8 and beyond. Public warning systems (e.g., Earthquake and Tsunami Warning System, ETWS, and Commercial Mobile Alert System, CMAS) required the ability to target alerts to specific geographic areas while using a common broadcast framework. LBA provides the necessary abstraction: the network can map an alert to one or more LBAs, and the broadcast bearer delivers the content only where needed.

The concept also addresses scalability. By grouping cells into LBAs, the core network and BM-SC can manage content distribution at an area granularity rather than per-cell, reducing signaling and configuration complexity. This is especially important for large-scale broadcast services where the number of cells is high but the number of content variants is modest. The stability of the definition across many releases indicates that the original design has proven adequate for evolving broadcast requirements, including those in 5G MBS.

What changed in its specifications

The latest release-to-release comparison of specifications that define Local Broadcast Area. Each summary describes the whole specification, not only this term.

TS 22.146Rel-6 → Rel-7

MBMS Enhancements was added, supporting IMS multimedia delivery conditional on network provision.

Full comparison in TS 22.146 →
TS 22.246Rel-7 → Rel-8

Rel-8 added extending PSS and MBMS User Services for optimized Mobile TV. This includes Pre-Delivery verification, Availability, TV service, and four other items.

Full comparison in TS 22.246 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-8 Initial

Initial definition introduced in TS 22.146 and TS 22.246: the area of a broadcast service where the service content is the same, allowing one broadcast service to have different content in different local broadcast areas.

Definition carried over unchanged from Rel-8; no textual revision to the LBA concept.

Definition carried over unchanged; LBA concept remained stable.

Definition carried over unchanged; no change to the LBA description.

Definition carried over unchanged; LBA continued to be referenced in broadcast service requirements.

Definition carried over unchanged; the concept remained applicable to evolving MBMS and public safety broadcast services.

Definition carried over unchanged; no textual revision.

Definition carried over unchanged; LBA concept persisted into the 5G era specifications.

Definition carried over unchanged; no change to the LBA wording.

Definition carried over unchanged; LBA remained part of broadcast service terminology.

Definition carried over unchanged; no textual revision.

Definition carried over unchanged; the LBA concept continues to be used in broadcast/multicast service descriptions.

Defining Specifications

3GPP specifications that define or reference Local Broadcast Area, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 22.146 vj00 MBMS Stage 1 Description Rel-19 read
TS 22.246 vj00 MBMS User Services Specification Rel-19 read