Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

MBMS RAB

MBMS Radio Access Bearer

Radio Access Network →

MBMS RAB is a combined radio access and RAN interface data bearer that provides the transport path for multicast/broadcast MBMS user data from the core network to the UE over the UTRAN.

Introduced
Rel-6
Where
Radio Access Network › UTRAN (3G)
Specifications
3 specs
MBMS RAB Description Purpose What changed Neighbours Specifications

Description

The MBMS Radio Access Bearer (MBMS RAB) is a key concept in the UMTS Terrestrial Radio Access Network (UTRAN) for delivering Multimedia Broadcast/Multicast Service (MBMS) user data. It is defined in 3GPP specifications TS 25.410, TS 25.413, and TS 25.446. The MBMS RAB denotes the combination of the Radio Access data bearer and the RAN Access Interface data bearer used for MBMS service user data transmission. In simpler terms, it represents the end-to-end transport path within the radio access network that carries MBMS content from the core network (specifically, the MBMS Gateway) to the user equipment (UE). This bearer is established for each MBMS service session and is shared by multiple UEs that are subscribed to the same service, enabling efficient point-to-multipoint transmission.

Architecturally, the MBMS RAB spans from the core network's MBMS Gateway (MGW) or Broadcast/Multicast Service Center (BM-SC) through the Iu interface to the RNC, and then over the Uu radio interface to the UE. The RAN Access Interface data bearer refers to the transport connection over the Iu interface between the core network and the RNC, while the Radio Access data bearer refers to the radio bearer over the Uu interface between the RNC and the UE. Together, they form the MBMS RAB. The MBMS RAB is established during the MBMS session start procedure, which is initiated by the BM-SC. The RNC receives the session start message containing the MBMS service identifier, QoS parameters, and other session attributes, and then sets up the necessary radio and transport resources. The MBMS RAB is released when the session ends.

The MBMS RAB is characterized by its point-to-multipoint nature. Unlike a conventional unicast RAB, which is dedicated to a single UE, the MBMS RAB is shared among all UEs in a cell or MBSFN area that are receiving the same MBMS service. This sharing is achieved through the use of a common radio bearer, such as a common traffic channel (CTCH) or a multicast traffic channel (MTCH) mapped onto a shared physical channel. The RNC manages the mapping of the MBMS RAB to the appropriate radio resources, taking into account factors such as the number of UEs interested in the service, the available radio resources, and the QoS requirements. The MBMS RAB also supports features like counting, where the RNC can determine the number of UEs interested in a service to decide whether to use point-to-point or point-to-multipoint transmission.

The MBMS RAB is associated with specific QoS parameters that define the required quality of service for the MBMS session, such as maximum bit rate, guaranteed bit rate, and delivery priority. These parameters are used by the RNC to allocate appropriate radio resources and to perform admission control. The MBMS RAB also supports synchronization and error handling mechanisms to ensure reliable delivery of MBMS content. For example, the RNC may use forward error correction (FEC) and retransmission schemes at the application layer (e.g., FLUTE) to recover lost packets.

The MBMS RAB concept was introduced in Release 6 as part of the initial MBMS specifications for UTRAN. It has been maintained in subsequent releases, with the definition evolving slightly. In Release 6, the definition referred to another specification, but from Release 8 onwards, it was explicitly defined as the combination of the Radio Access data bearer and the RAN Access Interface data bearer. This definition has remained stable through Release 19, reflecting the maturity of the MBMS RAB concept. The MBMS RAB is a fundamental building block for MBMS delivery in UTRAN, enabling operators to offer broadcast and multicast services efficiently over their UMTS networks.

Purpose & Motivation

The MBMS Radio Access Bearer was created to provide an efficient and standardized mechanism for delivering broadcast and multicast services over UTRAN. Before MBMS, cellular networks primarily supported unicast services, where each user had a dedicated bearer. Delivering the same content to many users via unicast would consume significant radio and core network resources, making it inefficient for services like mobile TV, live streaming, and emergency alerts. MBMS was designed to address this by enabling point-to-multipoint transmission, where a single bearer can serve multiple users simultaneously.

The MBMS RAB is the realization of this point-to-multipoint bearer within the radio access network. It combines the transport resources over the Iu interface and the radio resources over the Uu interface into a single logical entity. This allows the core network to send a single copy of the MBMS data stream to the RNC, which then distributes it to all interested UEs in its coverage area using shared radio resources. This approach dramatically reduces the load on both the core network and the radio access network compared to unicast delivery.

The introduction of the MBMS RAB in Release 6 was motivated by the need to support emerging mobile broadcast services. The 3GPP defined the MBMS architecture to include the BM-SC, MBMS Gateway, and the MBMS RAB to ensure that content can be delivered efficiently to a large audience. The MBMS RAB also supports QoS differentiation, allowing operators to prioritize different MBMS services based on their requirements. Over time, the MBMS RAB concept has been extended to support evolved MBMS (eMBMS) in LTE and 5G, demonstrating its enduring relevance in the evolution of mobile broadcast technologies.

What changed in its specifications

The latest release-to-release comparison of specifications that define MBMS RAB. Each summary describes the whole specification, not only this term.

TS 25.410Rel-10 → Rel-11

Rel-11 brings only minor changes to TS 25.410: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 25.410 →
TS 25.413Rel-11 → Rel-12

Release 12 adds LIPA and SIPTO procedural handling with new IEs, an MBMS Session Re-establishment Indicator IE, and BDS support including GANSS ID coding value 101.

Full comparison in TS 25.413 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-6 Initial

The MBMS RAB was introduced in Release 6 as part of the initial MBMS specifications for UTRAN. The definition referred to another specification (TS 25.410) and established the concept of a combined radio access and RAN interface data bearer for MBMS user data transmission.

The definition of MBMS RAB was updated in Release 8 to explicitly state that it denotes the Radio Access data bearer together with the RAN Access Interface data bearer for MBMS service user data transmission. The exact nature of the change from Release 6 cannot be assessed from the available wording, as the Release 6 definition was a reference to another specification.

The definition of MBMS RAB remained unchanged in Release 9, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 10, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 11, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 12, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 13, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 14, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 15, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 16, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 17, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 18, carrying over the same meaning as in Release 8.

The definition of MBMS RAB remained unchanged in Release 19, carrying over the same meaning as in Release 8.

Defining Specifications

3GPP specifications that define or reference MBMS RAB, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 25.410 vj00 Iu Interface Introduction for UTRAN Rel-19 read
TS 25.413 vj00 Radio Access Network Application Part (RANAP) Rel-19 read
TS 25.446 vj00 MBMS Synchronisation Protocol (SYNC) Rel-19 read