Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Management

MDT measurements

Minimization of Drive Tests Measurements

Management →

MDT measurements is the collection of network performance data from user equipment to minimize manual drive tests, thereby enhancing network optimization and coverage analysis.

Introduced
Rel-10
Where
Management
Specifications
2 specs
MDT measurements Description Purpose What changed Neighbours Detected Changes Specifications

Description

MDT measurements are a key component of the Minimization of Drive Tests (MDT) feature in 3GPP networks, designed to collect radio measurement data from user equipment (UE) to support network optimization and troubleshooting without the need for extensive manual drive tests. Defined in 3GPP TS 32.421 (Telecommunication management; Subscriber and equipment trace; Trace data definition and management) and TS 37.320 (Radio measurement collection for Minimization of Drive Tests), MDT measurements encompass a variety of radio and location information gathered by UEs during normal operation. These measurements are then reported to the network, typically to the Operations, Administration, and Maintenance (OAM) system, where they are used for coverage analysis, capacity optimization, and fault detection. MDT measurements are a crucial tool for operators to reduce operational costs and improve network quality.

The MDT feature was introduced in 3GPP Release 10 as a way to leverage the vast number of UEs in a network as mobile sensors. Instead of relying on dedicated drive tests, which are expensive and time-consuming, MDT uses UEs to collect measurements such as Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), and location information (e.g., GPS coordinates). These measurements are collected in both idle and connected modes, and can be configured for specific areas or user groups. The MDT measurements are then reported to the network either immediately or in a logged fashion, depending on the MDT mode (immediate or logged). The collected data is used to build coverage maps, identify weak spots, and optimize network parameters.

The architecture for MDT involves several functional entities: the UE, the Radio Access Network (RAN), the Core Network (CN), and the OAM system. The UE is configured to perform measurements via signaling from the RAN, which receives the configuration from the OAM system. The measurements are collected and reported to the RAN, which forwards them to the OAM system for processing. The MDT measurements can include both radio measurements and location information, and they can be associated with other data such as cell identity and time stamps. The MDT feature supports both signaling-based and management-based activation, allowing operators to configure MDT measurements for specific UEs or groups of UEs.

MDT measurements are used for a variety of purposes, including coverage optimization, mobility optimization, capacity optimization, and parameter tuning. For example, operators can use MDT data to identify areas with poor coverage and adjust antenna tilts or transmit power accordingly. They can also use MDT data to optimize handover parameters and reduce call drops. The measurements are also valuable for detecting network faults and for validating network planning. The MDT feature is designed to be transparent to users and to minimize the impact on UE battery life and network resources. It includes mechanisms for limiting the amount of data collected and for ensuring privacy, such as anonymizing location information.

The evolution of MDT measurements across 3GPP releases has focused on enhancing the types of measurements collected, improving the efficiency of data collection, and integrating with new network technologies such as 5G. For example, later releases have introduced support for MDT in 5G networks, including measurements for beamforming and millimeter wave. The MDT feature continues to be an important tool for network operators, enabling them to maintain high-quality networks while reducing operational costs. In summary, MDT measurements are a standardized mechanism for collecting radio and location data from UEs to support network optimization, and they play a vital role in the efficient operation of 3GPP networks.

Purpose & Motivation

MDT measurements exist to provide network operators with a cost-effective and efficient way to collect radio and location data for network optimization, replacing or supplementing traditional drive tests. Drive tests involve physically driving around with specialized equipment to measure network performance, which is expensive, time-consuming, and limited in scope. MDT leverages the ubiquitous presence of UEs to collect measurements continuously and across a wide area, providing a more comprehensive and real-time view of network performance. The feature was motivated by the need to reduce operational expenditures (OPEX) and to improve network quality by using data from actual user devices.

The MDT feature was introduced in 3GPP Release 10 as part of the Self-Organizing Networks (SON) initiative, which aimed to automate network management and optimization. Prior to MDT, operators relied on drive tests and static network planning tools, which could not capture the dynamic conditions experienced by users. MDT measurements address this limitation by providing real-world data on coverage, signal quality, and mobility. This data enables operators to identify and resolve issues such as coverage holes, interference, and handover failures more quickly and accurately. MDT also supports the growing demand for network densification and small cells, where traditional drive tests become even more challenging.

Over time, MDT measurements have evolved to support new technologies and use cases. In 5G, MDT measurements include beam-level measurements and support for network slicing, enabling operators to optimize the performance of specific slices. The feature also includes mechanisms for privacy protection and data minimization, ensuring that user data is handled responsibly. Overall, MDT measurements are a cornerstone of modern network management, enabling operators to maintain high-quality networks while reducing costs and improving efficiency.

What changed in its specifications

The latest release-to-release comparison of specifications that define MDT measurements. Each summary describes the whole specification, not only this term.

TS 32.421Rel-18 → Rel-19

Rel-19 adds RRC report collection to TS 32.421 for NG-RAN, covering RLF, RCEF, RA, SHR, SPR and MHI reports. It also introduces new clauses, definitions and requirements for subscriber and equipment trace and QoE collection management.

Full comparison in TS 32.421 →
TS 37.320Rel-17 → Rel-18

Rel-18 extends TS 37.320 MDT logging and reporting to non-public networks (PNI-NPN and SNPN). It also adds RACH-related content to reports and updates measurement references to TS 28.558.

Full comparison in TS 37.320 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (1 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-18 1 change
  • Correction to Immediate MDT measurements TS 37.320CR0139

Defining Specifications

3GPP specifications that define or reference MDT measurements, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 32.421 vj40 Subscriber & Equipment Trace Concepts & Requirements Rel-19 read
TS 37.320 vj40 MDT Overall Description (Stage 2) Rel-19 read