Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

MGL

Measurement Gap Length

Radio Access Network →

MGL is the duration of a measurement gap during which the UE suspends its normal communication to measure other frequencies or radio access technologies.

Introduced
Rel-13
Where
Radio Access Network › NG-RAN (5G)
Specifications
3 specs
MGL Description Purpose What changed Neighbours Detected Changes Specifications

Description

Measurement Gap Length (MGL) is a key parameter in the 3GPP measurement gap framework, defined primarily in 38.133 (NR RRM requirements) and referenced in 36.894 (multi-RAT measurement study) and 38.533 (NR UE conformance testing). A measurement gap is a period during which the UE temporarily stops transmitting and receiving on its serving cell so that it can retune its receiver to measure a different frequency (inter-frequency) or a different radio access technology (inter-RAT). MGL specifies how long that gap lasts.

The need for gaps arises from the UE's radio architecture. A UE typically has a single receiver chain (or a limited number), so it cannot simultaneously receive on the serving frequency and measure on another frequency. To perform inter-frequency or inter-RAT measurements for mobility (e.g., handover to another carrier or to LTE), the UE must retune, measure, and retune back. The gap provides a scheduled window for this, and the network must not schedule uplink or downlink transmissions to the UE during the gap.

MGL is one of several gap parameters. Others include MGRP (Measurement Gap Repetition Period), the periodicity with which gaps occur; MGO (Measurement Gap Offset), the starting position within the period; and MGTA (Measurement Gap Timing Advance), which allows the gap to start earlier for certain scenarios. Together these define the gap pattern. 3GPP defines a set of standardized gap patterns (e.g., gap pattern IDs 0–23 in NR), each with a specific MGL and MGRP combination. Common MGL values include 1.5 ms, 3 ms, 3.5 ms, 4 ms, 5.5 ms, and 6 ms, with MGRP values of 20, 40, 80, or 160 ms.

The choice of MGL involves a trade-off. A longer gap allows more measurement samples (improving measurement accuracy and enabling measurement of multiple frequencies), but it also means more time during which the UE cannot transmit or receive, reducing throughput and increasing latency. A shorter gap minimizes disruption but may not provide enough samples for reliable measurement, especially in low-SNR conditions or when measuring multiple cells. 3GPP therefore defines multiple gap patterns so the network can select one appropriate to the UE's measurement needs and traffic profile.

In NR, the gap framework was enhanced with per-UE gap patterns and per-FR (frequency range) gaps, allowing a UE with multiple receive chains to use different gap configurations for FR1 and FR2. Rel-15 and later releases introduced network-controlled small gaps and gap-less measurements for UEs capable of simultaneous reception. The MGL concept remains fundamental: it is the duration parameter that, together with MGRP, determines how much measurement opportunity the UE gets and how much service disruption the network incurs. Conformance testing in 38.533 verifies that UEs meet the MGL and measurement accuracy requirements under defined channel conditions.

Purpose & Motivation

MGL exists because UEs cannot generally receive on their serving frequency and measure on another frequency at the same time. Without a scheduled gap, the UE would have to either miss serving-cell data (causing errors) or skip measurements (causing handover failures). The gap framework solves this by creating a coordinated window during which the network pauses scheduling and the UE retunes.

The specific length of the gap matters because measurement quality depends on how many samples the UE can collect. Too short a gap yields noisy measurements and missed handovers; too long a gap wastes spectral resources and degrades user throughput. MGL, together with MGRP, lets the network tune this trade-off per UE and per scenario.

Historically, measurement gaps were introduced in early LTE releases to support inter-frequency and inter-RAT mobility. As networks became multi-band and multi-RAT (LTE, NR, and legacy), the gap framework was extended with more patterns and finer control. The Rel-13 work on multi-RAT measurement (36.894) and the NR gap framework in 38.133 reflect the growing complexity of mobility across frequencies and RATs. MGL remains the core duration parameter that makes this mobility possible without sacrificing serving-cell connectivity.

What changed in its specifications

The latest release-to-release comparison of specifications that define MGL. Each summary describes the whole specification, not only this term.

TS 38.133Rel-18 → Rel-19

Rel-19 adds low band carrier aggregation via switching and low-power wake-up receiver (LP-WUR) requirements to TS 38.133. It also adds ATG network support, intra-band non-collocated NR-CA receiver types, and multi-carrier BWP switch and SCell activation delay requirements.

Full comparison in TS 38.133 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (1 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-18 1 change
  • Correction of Annex H to cover additional mandatory gap pattern with MGL 3ms TS 38.533CR2813

Defining Specifications

3GPP specifications that define or reference MGL, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.894 vd00 LTE Measurement Gap Enhancement Study Rel-13 read
TS 38.133 vk10 NR Radio Resource Management Requirements Rel-20 read
TS 38.533 vj40 NR UE RRM Conformance Testing Rel-19 read