Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

Multicast transmission activation

Multicast transmission activation

Services →

Multicast transmission activation is the network procedure that activates transmission of multicast data for an MBMS service, marking the transition from an idle multicast service to active bearer delivery to subscribed users.

Introduced
Rel-8
Where
Services
Specifications
2 specs
Multicast transmission activation Description Purpose What changed Neighbours Specifications

Description

Multicast transmission activation is the process by which the network activates the transmission of multicast data for a Multimedia Broadcast/Multicast Service (MBMS) delivered in multicast mode. It is defined in 3GPP TS 22.146 and TS 22.246 as part of the MBMS service requirements. Conceptually, it is the control-plane trigger that moves a multicast service from a dormant or announced state into an active state in which multicast bearers are established and user-plane data is delivered to the cells where subscribed users are present.

In the MBMS architecture, activation is closely tied to the session start procedure. The BM-SC (Broadcast Multicast Service Centre) initiates an MBMS session start toward the MBMS-GW and the involved MME/AMF and RAN nodes. Multicast transmission activation is the service-level view of this: the network decides that multicast data transmission should begin, and it activates the necessary bearer resources. Because multicast mode is subscription-based, activation typically follows the presence of subscribed users in a given area, allowing the network to avoid transmitting multicast data where no authorised receivers exist.

Activation is distinct from service announcement and from the user's join procedure. A user may have joined a multicast service (signalled interest and been authorised via the Multicast Subscription Group), but actual multicast transmission is only activated when the network determines that delivery should start. This separation allows efficient use of radio resources: the network can keep a multicast service inactive until there is demand, then activate transmission, and later deactivate it when demand ceases.

The activation process interacts with bearer establishment, QoS enforcement, and security key distribution. When transmission is activated, the network ensures that the multicast bearer is configured with the appropriate QoS, that security material is available to subscribed users, and that the RAN delivers the data using multicast radio bearers (such as MBSFN or, in later releases, multicast broadcast services in 5GS). The definition of multicast transmission activation has remained unchanged from Release 8 through Release 19, reflecting the stability of the MBMS multicast activation model.

Purpose & Motivation

Multicast transmission activation exists to give the network explicit control over when multicast data is actually transmitted. Transmitting multicast data continuously, regardless of demand, would waste radio and backhaul resources, especially in cells with no subscribed receivers. By separating subscription and join from activation, the network can start multicast delivery only when it is needed and stop it when demand disappears.

Earlier broadcast-oriented MBMS approaches lacked a clear, standardised notion of demand-driven activation for multicast services. The activation process addresses this by defining the network action that turns on multicast transmission, enabling resource-efficient delivery and supporting the subscription-based authorisation model.

Activation also provides a clean interface between service-layer decisions (made by the BM-SC based on service schedules or demand) and bearer-layer actions (session start, bearer establishment, and radio transmission), allowing operators to manage multicast delivery as a controllable, on-demand service.

What changed in its specifications

The latest release-to-release comparison of specifications that define Multicast transmission activation. Each summary describes the whole specification, not only this term.

TS 22.146Rel-6 → Rel-7

MBMS Enhancements was added, supporting IMS multimedia delivery conditional on network provision.

Full comparison in TS 22.146 →
TS 22.246Rel-7 → Rel-8

Rel-8 added extending PSS and MBMS User Services for optimized Mobile TV. This includes Pre-Delivery verification, Availability, TV service, and four other items.

Full comparison in TS 22.246 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-8 Initial

Initial definition introduced: the process by which the network activates the transmission of multicast data. This established the demand-driven activation model for MBMS multicast mode in EPS.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Definition carried over unchanged from Release 8.

Defining Specifications

3GPP specifications that define or reference Multicast transmission activation, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 22.146 vj00 MBMS Stage 1 Description Rel-19 read
TS 22.246 vj00 MBMS User Services Specification Rel-19 read