Description
N1 mode is a UE operating mode defined in 3GPP Release 15 that allows a User Equipment to access the 5G core network (5GC) via the 5G access network (e.g., NG-RAN). It is specified in TS 24.501 (NAS protocol for 5G System) and TS 24.890 (5G NAS). The term distinguishes UEs that are capable of 5G NAS procedures from those operating in other modes, such as S1 mode (E-UTRAN access to EPC).
In N1 mode, the UE communicates with the 5G core network using the N1 reference point, which connects the UE to the Access and Mobility Management Function (AMF). The N1 interface carries NAS messages for mobility management (5GMM) and session management (5GSM). The UE must support 5G NAS protocols, including registration, authentication, security mode control, PDU session establishment, and mobility management procedures. N1 mode is a prerequisite for accessing 5G services such as network slicing, enhanced mobile broadband (eMBB), ultra-reliable low-latency communication (URLLC), and massive machine-type communication (mMTC).
Architecturally, N1 mode involves the UE connecting to a gNB (or ng-eNB) that is part of the NG-RAN. The gNB communicates with the AMF over the N2 interface, and the AMF handles NAS signaling with the UE. The UE's NAS layer in N1 mode is responsible for maintaining the UE's registration state, managing PDU sessions, and handling security contexts. The UE can transition between N1 mode and other modes (e.g., S1 mode) depending on network availability and UE capabilities, but simultaneous operation in multiple modes may be restricted.
The N1 mode concept is central to the 5G System architecture because it defines how UEs interact with the 5G core. It enables features like network slicing, where the UE can request specific slices during registration, and it supports interworking with EPC through procedures like EPS fallback or handover. The mode is also relevant for UEs that support both 4G and 5G, as they may operate in N1 mode when connected to 5G and S1 mode when connected to LTE.
In later releases, N1 mode continues to be the foundation for 5G UE operation. Enhancements in Rel-16 and beyond, such as support for non-public networks (NPN), 5G LAN-type services, and time-sensitive communications, are built on the N1 mode framework. The term remains stable, with the definition unchanged across releases, reflecting its fundamental role in the 5G System.
Purpose & Motivation
N1 mode exists to define a standardized way for UEs to access the 5G core network. Before 5G, UEs accessed the Evolved Packet Core (EPC) via E-UTRAN in S1 mode. With the introduction of the 5G System in Release 15, a new mode was needed to distinguish 5G access and the associated NAS procedures. N1 mode provides this distinction, ensuring that UEs and networks can unambiguously identify and negotiate 5G capabilities.
The motivation for N1 mode is to enable the full suite of 5G services, which require new NAS procedures and core network functions. For example, network slicing requires the UE to request slices during registration, which is a 5G NAS capability. Similarly, 5G QoS flows and PDU sessions are managed via 5GSM, which is only available in N1 mode. By defining N1 mode, 3GPP ensures that UEs supporting 5G can be tested and certified for these capabilities.
N1 mode also facilitates interworking between 4G and 5G. UEs that support both modes can switch between them based on coverage and service requirements. The mode concept helps networks manage UE behavior and ensures backward compatibility. Overall, N1 mode is a foundational concept for 5G UE operation, enabling the transition from 4G to 5G and supporting the evolution of services.
What changed in its specifications
The latest release-to-release comparison of specifications that define N1 mode. Each summary describes the whole specification, not only this term.
Rel-19 adds satellite NG-RAN access text, LP-WUS/WUR assistance and disabling, ATUC RAT utilization control, and network-controlled slice selection with S-NSSAI time validity to TS 24.501. It also adds ATSSS Phase 4 multi-access and 5G ProSe multi-hop relay support.
Full comparison in TS 24.501 →Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (91 CRs across 6 releases). Complements the general historical overview above with the evidence-based evolution of this function.
- Including S-NSSAI received in EPS in Requested NSSAI and in PDU session establishment request upon inter-system change from S1 mode to N1 mode TS 24.501CR0082
- Alignment and correction of mapped security context creation at S1 to N1 mode HO TS 24.501CR0037
- Addition of NAS container IE for N1 mode HO TS 24.501CR0038
- Correction and update of S1 mode to N1 mode NAS transparent container TS 24.501CR0039
- Removal of transparent container at N1 mode to S1 mode HO TS 24.501CR0041
- On #27 N1 mode not allowed TS 24.501CR0101
+ 14 more changes
- 5GS NAS extended timers for NB-N1 mode and WB-N1/CE mode devices TS 24.501CR1647
- Condition to avoid redundant registration procedures during inter system change from S1 to N1 mode TS 24.501CR1490
- Correcting UE state when disabling and re-enabling N1 mode TS 24.501CR0984
- Disabling of N1 mode capability after emergency services fallback TS 24.501CR1147
- Clarification on disabling N1 mode capability when there is persistent PDU session TS 24.501CR1149
- Handling the non-current 5G NAS security context after inter-system change from N1 mode to S1 mode TS 24.501CR1270
+ 19 more changes
- Removing joined UE from MBS sessions at inter-system change from N1 mode to S1 mode TS 24.501CR3818
- Avoid unnecessary signalling for CP only PDU sessions after inter-system change from S1 mode to N1 mode TS 24.501CR2609
- Correction in the N1 mode capability handling TS 24.501CR2731
- Lack of ID for inter-system change from S1 mode to N1 mode TS 24.501CR2745
- N1 mode disable when neither emergency services nor emergency services fallback works TS 24.501CR2889
- Delay enabling N1 mode until NAS signalling connection or RR connection is released TS 24.501CR2895
+ 15 more changes
- Clarification of interworking between N1 mode over non-3GPP access and ePDG TS 24.501CR4551
- Correction on disabling the N1 mode capability when all S-NSSAI was rejected TS 24.501CR4604
- UE-requested PDU session modification after inter-system change from S1 mode to N1 mode TS 24.501CR4998
- Clarification on disabling and enabling N1 mode and SNPN selection for onboarding services TS 24.501CR5348
- Clarification of the UE behavior disabling N1 mode capability TS 24.501CR5800
- Consideration of satellite cell after disabling N1 mode TS 24.501CR5954
+ 9 more changes
- Abnormal case handling Inter-system change from N1 mode to S1 mode triggered during UE-requested PDU session establishment procedure TS 24.501CR6436
- Satellite access technology considerations for requirements related to disabling N1 mode capability because voice service was not available TS 24.501CR6491
- Update on re-enabling UE's N1 mode capability TS 24.501CR6466
- No N1 mode capability disabling when deregistering for eCall inactivity TS 24.501CR6641
- Re-enabling N1 mode when T3526 expires TS 24.501CR6565
- Correction to PDU session status for inter sytem change from S1 mode to N1 mode TS 24.501CR6708
+ 2 more changes
Defining Specifications
3GPP specifications that define or reference N1 mode, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 24.501 vk10 | 5GS NAS Protocol Specification | Rel-20 read |
| TS 24.890 vg00 | 5G NAS Protocol for 5GS Stage 3 | Rel-16 read |