Description
The NAS signalling connection is the EPS (S1 mode) control-plane connection that carries Non-Access Stratum messages between a User Equipment and the Mobility Management Entity. It is defined in 3GPP TS 24.301 and is the EPS counterpart of the 5G N1 NAS signalling connection. Like its 5G successor, it is not a single transport link but a concatenation: the UE-to-eNB segment is an RRC connection over the LTE-Uu interface, and the eNB-to-MME segment is an S1AP connection over the S1 interface. NAS messages are carried transparently by the eNB inside RRC messages on the radio side and inside S1AP messages on the S1 side.
The connection is established when the UE initiates NAS signalling — for example, during the initial attach procedure, a tracking area update, a service request, or a PDN connectivity request — and is released when the MME or the UE decides that no further signalling is needed. While the connection exists, the UE is in EMM-CONNECTED state with respect to the MME; upon release, the UE transitions to EMM-IDLE. The MME maintains the EPS mobility management (EMM) and EPS session management (ESM) contexts associated with the connection, and NAS security (integrity protection and ciphering) is established over it via the security mode procedure.
The definition also includes an additional, historically important case: for optimized handover or idle-mode mobility from cdma2000 HRPD access to E-UTRAN (as described in TS 23.402), the NAS signalling connection can consist of a concatenation of an S101-AP connection and a signalling tunnel over the cdma2000 HRPD access network. This reflects the CDMA2000 interworking architecture of early LTE deployments, where the MME communicates with the HRPD access network via the S101 interface to support seamless mobility for dual-mode devices.
The NAS signalling connection is central to the EPS control plane. It is the vehicle for all EMM procedures (attach, detach, tracking area update, service request, paging response, authentication, security mode control, GUTI reallocation, identity request) and all ESM procedures (default and dedicated bearer activation, modification and deactivation, PDN connectivity). Its lifecycle drives the ECM-CONNECTED/ECM-IDLE state machine in the MME and the corresponding RRC state transitions in the eNB.
Architecturally, the NAS signalling connection demonstrates the separation between the access stratum (RRC, PDCP, RLC, MAC, PHY) and the non-access stratum (EMM, ESM). The eNB is aware of the connection's existence for the purpose of transporting NAS PDUs and for paging, but it does not interpret NAS content. The MME terminates the NAS protocol and is the anchor for mobility and session management. This layering is what allows the same NAS procedures to operate over different radio access technologies (LTE, and via interworking, HRPD) and is the conceptual ancestor of the 5G N1 NAS signalling connection.
Purpose & Motivation
The NAS signalling connection was created to provide a well-defined control-plane channel between the UE and the MME in the EPS architecture introduced in 3GPP Release 8. Before EPS, the equivalent function in GPRS/UMTS was provided by the GMM/SM signalling connection over the Iu interface; EPS redefined this as a concatenation of an RRC connection and an S1AP connection, reflecting the flat, two-node architecture of LTE (eNB and MME) and the split between the access stratum and the non-access stratum.
The concatenation model solves the layering problem: the eNB does not need to understand NAS, and the MME does not need to understand the details of the LTE radio interface. This allows the MME to serve UEs over LTE and, via the S101 interface, over cdma2000 HRPD access, enabling seamless interworking with legacy CDMA2000 networks. It also allows the EMM/ECM state machines to be defined independently of RRC states, which is essential for paging and reachability management.
The NAS signalling connection concept was carried forward into 5G as the N1 NAS signalling connection, with the S1AP connection replaced by an NG connection over N2 and the RRC connection over LTE-Uu replaced by an RRC connection over Uu (or an IPsec tunnel over NWu for non-3GPP access). Understanding the EPS definition is therefore essential for understanding its 5G evolution.
What changed in its specifications
The latest release-to-release comparison of specifications that define NAS signalling connection. Each summary describes the whole specification, not only this term.
Rel-19 adds store-and-forward satellite operation for NTN, control plane CIoT data overhead reduction via EMM TRANSPORT and Data container IE, and RAT utilization control. It also adds disaster roaming indications and MINT-EPS support, plus MPS priority for messaging paging.
Full comparison in TS 24.301 →Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (8 CRs across 4 releases). Complements the general historical overview above with the evidence-based evolution of this function.
- Releasing NAS signalling connection and Paging restriction during mobility TAU in a TA outside the current Tracking Area List for MUSIM UE in EPS TS 24.301CR3645
- UE to release NAS signalling connection and indicate Paging restriction during mobility TAU only if no emergency service is ongoing in EPS TS 24.301CR3677
- NAS signalling Connection maintenance for PLMN selection TS 24.301CR3791
Defining Specifications
3GPP specifications that define or reference NAS signalling connection, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 24.301 vk10 | EPS NAS Mobility and Session Management | Rel-20 read |
| TS 24.801 v810 | CT1 SAE NAS Aspects for EPC | Rel-8 read |