Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

NR sidelink communication

New Radio Sidelink Communication

Radio Access Network →

NR sidelink communication is a 5G NR access-stratum functionality enabling direct communication between nearby UEs without traversing any network node, supporting V2X, A2X, ProSe, and relay scenarios.

Introduced
Rel-16
Where
Radio Access Network › NG-RAN (5G)
Specifications
12 specs
Also in
User Equipment
NR sidelink communication Description Purpose What changed Neighbours Detected Changes Specifications

Description

NR sidelink communication is the access stratum (AS) functionality that allows two or more nearby user equipments (UEs) to communicate directly using NR technology, without the traffic passing through any network node. It was introduced in 3GPP Release 16 as part of the broader 5G NR specifications, building on the earlier LTE sidelink (which was primarily designed for V2X). NR sidelink extends the concept to support a wider range of services, including V2X (Vehicle-to-Everything), A2X (Aerial-to-Everything), and ProSe (Proximity Services) communication.

The sidelink operates on dedicated sidelink resources, which can be configured by the network (mode 1) or autonomously selected by the UE (mode 2). In mode 1, the gNB allocates sidelink resources to UEs, providing centralized control and avoiding collisions. In mode 2, UEs perform distributed resource selection based on sensing and reservation, which is suitable for out-of-coverage scenarios or when network coverage is not available. The sidelink supports both unicast and groupcast/broadcast communication.

The NR sidelink protocol stack includes the physical sidelink control channel (PSCCH), physical sidelink shared channel (PSSCH), and physical sidelink feedback channel (PSFCH). The PSFCH enables HARQ feedback for sidelink unicast and groupcast, improving reliability. The sidelink also supports sidelink synchronization signals (SLSS) and sidelink synchronization signal blocks (S-SSB) for synchronization between UEs.

In Release 16, NR sidelink focused on V2X communication, supporting basic safety and advanced driving use cases. Release 17 expanded the scope to include ProSe communication, including UE-to-Network Relay and UE-to-UE Relay, enabling coverage extension and direct communication in public safety and commercial scenarios. Release 18 further added A2X communication, supporting aerial vehicles and drones.

The sidelink is managed by the network when UEs are in coverage, but can operate autonomously when out of coverage. The network configures sidelink resources and policies, and the UEs perform resource selection and scheduling according to the configured parameters. The sidelink supports QoS differentiation, allowing different services to receive appropriate treatment based on their requirements.

Purpose & Motivation

NR sidelink communication exists to enable direct, low-latency, high-reliability communication between devices without relying on network infrastructure. Traditional cellular communication requires all traffic to traverse the base station and core network, which introduces latency and may be inefficient for local communication. Sidelink addresses this by allowing devices to communicate directly, reducing latency and offloading traffic from the network.

The primary motivation for NR sidelink was V2X communication, where vehicles need to exchange safety-critical information with low latency and high reliability. Sidelink enables vehicles to communicate directly with each other, with roadside infrastructure, and with pedestrians, even in areas without network coverage. This is essential for advanced driving use cases such as cooperative collision avoidance and platooning.

Release 17 extended sidelink to ProSe communication, enabling public safety users and commercial applications to communicate directly. The UE-to-Network Relay allows devices outside network coverage to connect via a relay UE, extending coverage. The UE-to-UE Relay enables direct communication between devices that may not be in direct range.

Release 18 added A2X communication, supporting aerial vehicles and drones. This allows drones to communicate directly with each other and with ground infrastructure, enabling new use cases such as drone delivery and aerial surveillance.

NR sidelink also supports network slicing and QoS, allowing operators to provide differentiated services over direct links. It is a key enabler for the 5G ecosystem, supporting new applications and business models that require direct device-to-device communication.

What changed in its specifications

The latest release-to-release comparison of specifications that define NR sidelink communication. Each summary describes the whole specification, not only this term.

TS 36.300Rel-18 → Rel-19

Rel-19 added NTN IoT Phase 3 for LTE, covering regenerative payload S1 removal, Msg3 early data transmission, and ETWS/CMAS for NB-IoT NTN. It also added inter-RAT mobility from E-UTRAN terrestrial network to NR NTN, plus NR NTN feeder link switchover via handover.

Full comparison in TS 36.300 →
TS 36.304Rel-18 → Rel-19

Rel-19 adds NTN IoT Phase 3 for LTE to TS 36.304, changing sf-OperationMode and t-ModeSwitching, plus IoT NTN TDD support. Three further items are also added or changed in the same spec.

Full comparison in TS 36.304 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (4 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-16 4 changes
  • Correction for NR sidelink communication TS 36.300CR1287
  • Correction for NR sidelink communication TS 38.300CR0245
  • Stage-2 corrections for NR sidelink communication TS 38.300CR0323
  • Corrections to prioritization for NR sidelink communication TS 38.321CR1169

Defining Specifications

3GPP specifications that define or reference NR sidelink communication, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.300 vj20 E-UTRAN Radio Interface Protocol Architecture Rel-19 read
TS 36.304 vj30 LTE UE Idle Mode Procedures Rel-19 read
TS 36.321 vj30 E-UTRA MAC Protocol Specification Rel-19 read
TS 36.331 vj40 E-UTRA Radio Resource Control (RRC) Protocol Rel-19 read
TS 37.324 vj00 Service Data Adaptation Protocol (SDAP) Rel-19 read
TS 37.340 vj30 Overview of Multi-Connectivity Operation using E-UTRA and NR Rel-19 read
TS 38.300 vj40 NR and NG-RAN Overall Description Rel-19 read
TS 38.304 vj30 NR UE Idle and Inactive State Procedures Rel-19 read
TS 38.321 vj40 NR MAC Protocol Specification Rel-19 read
TS 38.322 vj30 NR Radio Link Control (RLC) Protocol Specification Rel-19 read
TS 38.323 vj10 PDCP Protocol Specification Rel-19 read
TS 38.331 vj40 NR Radio Resource Control (RRC) Rel-19 read