Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

On Board processing

On Board processing

Radio Access Network →

On Board processing is the digital processing of uplink radio signals performed aboard a satellite or aerial platform, enabling regenerative payloads by allowing demodulation, decoding, and routing in space.

Introduced
Rel-15
Where
Radio Access Network › NG-RAN (5G)
Specifications
3 specs
On Board processing Description Purpose Neighbours Specifications

Description

On Board processing (OBP) refers to the digital signal processing carried out aboard a satellite or an aerial platform (such as a HAPS or UAV) on the uplink RF signals received from user equipment or ground stations. Rather than simply amplifying and frequency-converting the signal as a transparent bent-pipe payload does, an OBP payload digitises the received waveform and performs baseband operations in space: filtering, channel estimation, demodulation, decoding, switching, and re-encoding for the downlink. This transforms the space or aerial node from a mere repeater into an intelligent network element.

The degree of on-board processing varies by architecture. At a basic level, OBP may perform digital channel filtering and frequency conversion, routing each uplink carrier to a selected downlink beam (digital transparent processing). At a more advanced level, it implements full baseband processing including demodulation and decoding, which is the foundation of the regenerative payload and the on-board gNB. 3GPP TR 38.811 and TR 38.821 study these options for NTN, while TR 36.763 captures earlier work on satellite access for LTE-based systems.

Key components of an OBP payload include the RF front end and analogue-to-digital conversion stage, a digital beamforming and channeliser block, a baseband processor (FPGA or ASIC) implementing the protocol functions, and a switching/routing fabric that directs traffic between beams, feeder links and inter-satellite links. The payload must operate within tight mass, power and thermal budgets and must tolerate radiation, which constrains the processing capacity that can be hosted in orbit.

The benefits of OBP are substantial. By demodulating and decoding on board, the satellite can aggregate user traffic, apply QoS and scheduling, and route packets over inter-satellite links, reducing the number of gateway stations and the feeder-link bandwidth required. It also reduces end-to-end latency because the signal does not need to travel to a ground gateway and back for every packet. Digital beamforming enabled by OBP allows flexible beam shaping and hopping, improving capacity and coverage adaptability.

The challenges include increased payload complexity and cost, higher power consumption, thermal dissipation in vacuum, and the need for radiation-hardened electronics. Because satellites cannot be easily serviced, OBP payloads must be highly reliable and reconfigurable via software updates from the ground. 3GPP management work (e.g., TR 28.874) addresses how such payloads are modelled and managed. OBP is the technological foundation for regenerative NTN and for the evolution toward spaceborne gNBs and inter-satellite networking.

Purpose & Motivation

On Board processing exists to overcome the inefficiencies of transparent, bent-pipe satellite payloads. In a transparent system, the satellite merely amplifies and frequency-converts the signal, so all demodulation, decoding and routing must happen at a ground gateway. This means every user packet traverses the space segment twice, doubling latency, and the feeder link must carry the full raw waveform, consuming large amounts of bandwidth. OBP addresses both problems by processing the signal in space.

Historically, satellite payloads were analogue and transparent because digital processing electronics were too heavy, power-hungry and radiation-sensitive for orbit. As FPGAs, ASICs and radiation-tolerant processors matured, it became feasible to move meaningful processing on board. Early work in 3GPP TR 36.763 examined satellite access for LTE, and the NTN studies in TR 38.811 and TR 38.821 formalised OBP as a key architectural option, distinguishing digital transparent processing from full regenerative processing.

OBP also enables flexibility and resilience. Digital beamforming and beam hopping allow the satellite to adapt capacity to demand, while on-board switching and routing support inter-satellite links and reduce dependence on ground infrastructure. This is essential for coverage of oceans, polar regions and disaster zones where gateways are unavailable. The trade-off is complexity, cost and power, which is why OBP adoption has been gradual and why 3GPP supports both transparent and regenerative architectures.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-15 Initial

Initial definition established in TR 36.763: digital processing carried out on uplink RF signals aboard a satellite or an aerial. This introduced OBP as a distinct architectural option for satellite access, contrasting with transparent bent-pipe payloads.

The definition carried over unchanged into the NTN study context (TR 38.821), where OBP was analysed as the basis for regenerative payloads and on-board gNBs.

The definition remained unchanged; Rel-17 NTN work continued to reference OBP as the enabler of regenerative architectures without revising the terminology.

Defining Specifications

3GPP specifications that define or reference On Board processing, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 36.763 vh00 NB-IoT/eMTC Support for Non-Terrestrial Networks Rel-17 read
TS 38.811 vf40 Study on NR Support for Non-Terrestrial Networks Rel-15 read
TS 38.821 vg20 NR Support for Non-Terrestrial Networks Rel-16 read