Description
The OTA coverage range is a concept introduced in 3GPP Release 15 as part of the specifications for Over-The-Air (OTA) testing of radio equipment, particularly for 5G New Radio (NR) and massive MIMO base stations. OTA testing is necessary for devices that do not have antenna connectors, such as integrated antenna systems, and for verifying the radiated performance of the device. The OTA coverage range is defined as a common range of directions within which TX OTA requirements that are neither specified in the OTA peak directions sets nor as Total Radiated Power (TRP) requirement are intended to be met. In other words, it is a spatial region around the device under test (DUT) where certain OTA requirements (e.g., Error Vector Magnitude, Adjacent Channel Leakage Ratio) must be satisfied, excluding the specific directions where peak performance is measured and the overall TRP requirement.
The OTA coverage range is used in the context of conformance testing of base stations (BS) and user equipment (UE) to ensure that the radiated performance meets the requirements across a range of angles, not just at the peak. This is important for massive MIMO systems, where the antenna array forms beams in various directions, and the performance may vary with direction. The OTA coverage range provides a defined set of directions (e.g., a spherical sector) over which the requirements apply, allowing for consistent testing methodologies.
The concept is closely related to the OTA peak directions sets, which are the specific directions where the peak EIRP (Effective Isotropic Radiated Power) or other peak requirements are measured. The OTA coverage range excludes these peak directions and the TRP requirement, which is a single value representing the total power radiated in all directions. Instead, the OTA coverage range covers the remaining directions where the device must still meet certain minimum performance criteria. This ensures that the device does not have nulls or poor performance in directions other than the peak, which could affect overall network coverage and interference.
The OTA coverage range is defined in various 3GPP specifications, including TS 38.104 (NR base station radio transmission and reception), TS 38.141 (NR base station conformance testing), TS 37.105 (active antenna system base station conformance testing), and TS 36.108 (LTE base station OTA testing). The specific range (e.g., the angular extent) may be defined per requirement or per frequency band, and it is typically specified as a set of directions (e.g., azimuth and elevation angles) relative to the DUT's orientation. The testing is performed in an anechoic chamber or a compact antenna test range (CATR) to measure the radiated performance.
The OTA coverage range is a key concept for ensuring that 5G NR devices with advanced antenna systems (AAS) meet performance requirements in all relevant directions, not just at the peak. It enables a standardized approach to OTA testing, which is essential for interoperability and global certification. The term has been carried forward in subsequent releases (Rel-16 through Rel-20) without changes to its definition, indicating its stability and continued relevance as 5G evolves.
In summary, the OTA coverage range is a spatial region used in OTA testing to verify that a device meets certain TX requirements across a range of directions, excluding peak directions and TRP. It is a fundamental concept for the conformance testing of 5G NR and other advanced radio systems.
Purpose & Motivation
The OTA coverage range was created to address the need for standardized OTA testing of radio equipment with integrated antennas, particularly for 5G NR massive MIMO systems. Traditional conducted testing, where the device is connected via cables to test equipment, is not possible for devices without antenna connectors. OTA testing measures the radiated performance in a chamber, but it requires defining the spatial directions over which the requirements apply. The OTA coverage range provides a common set of directions for testing non-peak requirements, ensuring that devices perform adequately across a wide range of angles, not just at the peak.
Prior to the introduction of OTA coverage range, OTA testing was often limited to peak EIRP and TRP measurements, which did not capture the full spatial performance of the device. For massive MIMO, the beamforming patterns can have nulls or reduced performance in certain directions, which could lead to coverage holes or interference issues. The OTA coverage range ensures that the device meets minimum performance criteria in these non-peak directions, thereby improving overall network reliability and user experience.
The concept also facilitates consistent testing methodologies across different test labs and vendors. By defining a common range of directions, the specifications enable reproducible testing and fair comparison of devices. This is essential for certification and type approval, where devices must demonstrate compliance with 3GPP requirements. The OTA coverage range has been adopted in numerous 3GPP specifications for both base stations and UEs, and it continues to be a cornerstone of OTA conformance testing for 5G and beyond.
What changed in its specifications
The latest release-to-release comparison of specifications that define OTA coverage range. Each summary describes the whole specification, not only this term.
Extended OTA BS testing to 43.5–48.2 GHz; added new measurement/uncertainty clauses; revised procedures.
Full comparison in TR 37.941 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Introduced as part of the 5G NR OTA testing framework. Defined as a common range of directions within which TX OTA requirements that are neither specified in the OTA peak directions sets nor as TRP requirement are intended to be met. This provided a standardized approach for testing massive MIMO base stations and UEs.
Defining Specifications
3GPP specifications that define or reference OTA coverage range, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 36.108 vk00 | Satellite Access Node RF Requirements | Rel-20 read |
| TS 36.181 vj40 | RF Test Methods and Conformance for Satellite Access Nodes | Rel-19 read |
| TS 37.105 vj40 | AAS Base Station Radio Requirements | Rel-19 read |
| TS 37.145 vj40 | AAS Base Station Radiated Requirements | Rel-19 read |
| TR 37.843 vf70 | AAS BS Radiated RF Requirement Background | Rel-15 read |
| TR 37.941 vj20 | RF Conformance Testing Background for Radiated BS Requirements | Rel-19 read |
| TS 38.104 vk10 | NR Base Station RF Requirements | Rel-20 read |
| TS 38.106 vk00 | NR Repeaters: RF Requirements (TS 38.106) | Rel-20 read |
| TS 38.108 vk00 | NR NTN Satellite Access Node RF Requirements | Rel-20 read |
| TS 38.115 vj20 | Repeater Conformance Testing - Part 2: Radiated | Rel-19 read |
| TS 38.141 vj40 | BS Conformance Testing (TR 38.141) | Rel-19 read |
| TS 38.174 vk00 | NR Integrated Access and Backhaul Requirements | Rel-20 read |
| TS 38.176 vj40 | IAB Conformance Testing | Rel-19 read |
| TS 38.181 vj40 | NR Satellite Access Node RF Conformance Testing | Rel-19 read |
| TS 38.817 | 3GPP TR 38.817 | Rel-15 read |