Description
Power Class 3 (PC3) is one of the UE power classes defined by 3GPP to specify the maximum output power a device may transmit in a given frequency band. For most LTE and NR bands, PC3 corresponds to a maximum output power of 23 dBm (±2 dB tolerance), which balances uplink coverage against SAR limits, battery consumption, and regulatory constraints. Power classes allow networks and devices to align on expected transmit capabilities, ensuring predictable link budgets and coexistence behavior.
In the 3GPP specification landscape, PC3 is referenced in multiple domains. RF and performance specifications (e.g., TS 38.101 and related performance documents) define the transmitter characteristics, tolerances, and test procedures for PC3 devices. Management specifications such as TS 32.844 capture performance measurements and KPIs associated with UE power classes for network management. TS 24.554, a protocol specification, references power class information in the context of UE capabilities and configuration signaling. TR 38.873 studies power class options and their implications for coverage and deployment.
Operationally, the power class determines the maximum uplink transmit power and therefore the uplink coverage and link budget. Higher power classes (e.g., PC2 at 26 dBm, PC1.5, or PC1) can improve uplink coverage and cell-edge performance but impose stricter requirements on PA design, thermal management, SAR compliance, and harmonic/spurious emissions. PC3 remains the most common class because it offers a practical balance for handheld devices. Networks use the signaled UE power class to configure power control parameters, expected received power levels, and handover thresholds.
PC3 also interacts with features such as uplink carrier aggregation, dual connectivity, and dynamic power sharing. When a UE transmits on multiple carriers or towards multiple cell groups, the total power must remain within class limits, and power sharing rules determine how the budget is allocated. These rules are essential to avoid exceeding SAR limits and to maintain RF compliance while maximizing uplink throughput.
In summary, PC3 is a foundational RF capability definition that underpins uplink power control, coverage planning, and device certification. Its consistent definition across releases and specifications ensures interoperability between devices and networks and provides a stable baseline against which higher power classes and advanced uplink features are developed.
Purpose & Motivation
PC3 exists to standardize the maximum transmit power of user equipment so that networks can plan coverage, configure power control, and ensure coexistence without ambiguity about device capabilities. Without defined power classes, link budgets and RF compliance testing would be inconsistent across vendors and bands.
The concept originated with early cellular systems and was formalized in 3GPP to support the growing diversity of devices and frequency bands. As networks evolved toward higher data rates and new spectrum, additional power classes were introduced to address specific coverage and deployment needs, but PC3 remained the baseline for mainstream handsets because it balances coverage, battery life, and SAR constraints.
PC3 solves the problem of predictable uplink performance: operators can assume a known maximum power when dimensioning cells, and devices can be certified against clear RF requirements. It also provides the reference point for advanced features such as uplink carrier aggregation and dual connectivity, where power sharing rules must respect class limits.
What changed in its specifications
The latest release-to-release comparison of specifications that define PC3. Each summary describes the whole specification, not only this term.
Rel-19 adds multi-hop NR sidelink UE-to-network relay with new direct link establishment procedures and discovery IEs. It extends 5G ProSe to SNPNs, adding SNPN identification, authorisation checks, and PC5 relay indications. It also adds multi-hop relay configuration over PC5 and charging-related abbreviations and content type values.
Full comparison in TS 24.554 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference PC3, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 24.554 vk10 | 5G ProSe Protocols and Procedures | Rel-20 read |
| TS 32.844 vc00 | Charging for ProSe Direct Communication in Public Safety | Rel-12 read |
| TS 38.873 vg00 | NR Band n48 Technical Report | Rel-16 read |