Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

Positioning integrity

Positioning Integrity

Services →

Positioning integrity is a measure of trust in the accuracy of position-related data and the ability to provide timely, valid warnings when the positioning system does not meet its intended operating conditions.

Introduced
Rel-17
Where
Radio Access Network › NG-RAN (5G)
Specifications
3 specs
Positioning integrity Description Purpose What changed Neighbours Detected Changes Specifications

Description

Positioning integrity is a concept that quantifies the trustworthiness of position-related data provided by a positioning system. It goes beyond simple accuracy by providing a measure of confidence in the reported position and, crucially, the ability to alert consumers when the positioning system cannot be trusted. This is analogous to integrity concepts in satellite navigation (such as RAIM in GNSS), where the system must not only provide a position but also warn users when the position may be unreliable. In 3GPP, positioning integrity is specified in TS 36.305, TS 38.305, and TR 38.857, and is particularly relevant for safety-critical applications such as autonomous driving, railway control, and emergency services.

The positioning integrity framework involves several key elements. The positioning system, which may use one or more positioning methods (e.g., OTDOA, A-GNSS, RTT), computes a position estimate along with integrity-related parameters. These parameters may include an integrity risk, protection level, or alert limit, which describe the confidence in the position and the conditions under which the position should be considered invalid. The LCS client, which consumes the position data, specifies its integrity requirements, such as the maximum tolerable error and the required alert latency.

The system continuously monitors the positioning performance and compares it against the specified integrity requirements. If the positioning system detects that it cannot meet the required integrity (for example, due to signal degradation, multipath, or insufficient measurements), it generates an alert. This alert is delivered to the LCS client in a timely manner, allowing the client to take appropriate action, such as ignoring the position data or switching to an alternative positioning source. The integrity mechanism thus provides a safety net that prevents consumers from acting on unreliable location information.

In 5G and beyond, positioning integrity becomes increasingly important as networks are used for mission-critical and safety-related applications. The integration of integrity concepts into the 3GPP positioning architecture ensures that location data can be used with confidence in scenarios where incorrect positioning could have severe consequences. The specifications define how integrity requirements are signaled, how integrity information is computed and reported, and how alerts are delivered.

The evolution of the definition of positioning integrity reflects a simplification in wording. In Release 17, the definition emphasized the trust in accuracy and the ability to provide timely and valid warnings to the LCS client when the positioning system does not fulfil the condition for intended operation. In Release 18, the definition was revised to a more concise form: a measure of the trust in the accuracy of the position-related data and the ability to provide associated alerts. This change streamlined the language while preserving the core concept. Release 19 retained the revised wording.

Purpose & Motivation

Positioning integrity exists to address a fundamental limitation of positioning systems: accuracy alone is not sufficient for safety-critical applications. A positioning system may report a position with a certain accuracy under normal conditions, but various factors such as signal blockage, multipath interference, or network congestion can degrade performance in ways that are not immediately apparent. Without integrity monitoring, a consumer might unknowingly act on erroneous position data, leading to dangerous outcomes.

The concept was motivated by similar integrity mechanisms in aviation and satellite navigation, where systems like RAIM (Receiver Autonomous Integrity Monitoring) and SBAS (Satellite-Based Augmentation Systems) provide warnings when GNSS positions cannot be trusted. As cellular networks began to be used for applications like autonomous vehicles, drones, and emergency response, the need for a comparable integrity framework became clear. 3GPP introduced positioning integrity to ensure that cellular positioning could meet the stringent requirements of these domains.

By providing timely alerts when positioning performance degrades, positioning integrity enables consumers to implement fallback strategies, such as using alternative sensors or requesting a new position fix. It also allows operators to guarantee a certain level of trust in location data, which is essential for service level agreements and regulatory compliance. The concept continues to evolve as 5G networks support more demanding use cases, and it is expected to remain a key element of location services in future releases.

What changed in its specifications

The latest release-to-release comparison of specifications that define Positioning integrity. Each summary describes the whole specification, not only this term.

TS 36.305Rel-11 → Rel-12

Added BeiDou Navigation Satellite System (BDS) support for UTRA and LTE. Added GERAN and UTRAN measurement results to RF pattern matching positioning data transferred from eNodeB to E-SMLC.

Full comparison in TS 36.305 →
TS 38.305Rel-18 → Rel-19

Rel-19 adds enhanced NR topology support to TS 38.305, including WAB-gNB, updated definitions and gNB-to-LMF information transfer. It also includes two further related items.

Full comparison in TS 38.305 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (1 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-17 1 change
  • Introduction of B2a and B3I signal in BDS system and GNSS Positioning Integrity TS 36.305CR0107

Defining Specifications

3GPP specifications that define or reference Positioning integrity, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.305 vj00 UE Positioning in E-UTRAN Stage 2 Rel-19 read
TS 38.305 vj30 NG-RAN UE Positioning Stage 2 Rel-19 read
TR 38.857 vh00 Study on NR Positioning Enhancements Rel-17 read