Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

RSARP

Reference Signal Antenna Relative Phase

Physical Layer →

RSARP is the relative phase relationship between reference signals transmitted from different antennas, enabling accurate multi-antenna channel characterization and supporting advanced beamforming and positioning in LTE and 5G NR systems.

Introduced
Rel-13
Where
Testing
Specifications
2 specs
RSARP Description Purpose What changed Neighbours Specifications

Description

Reference Signal Antenna Relative Phase (RSARP) is a physical-layer concept introduced in 3GPP Release 13 that characterizes the phase relationship between reference signals transmitted from different antenna elements of a multi-antenna array. In MIMO and beamforming systems, the phase difference between signals radiated from separate antenna ports carries critical information about the spatial channel, the array geometry, and the propagation environment. RSARP provides a formalized way to express and measure this relative phase, which is essential for coherent multi-antenna transmission, beam management, and accurate channel estimation.

The concept builds on the reference signal structures defined for LTE (such as Cell-specific Reference Signals, CSI Reference Signals, and Positioning Reference Signals) and later extended to 5G NR reference signals. When a base station transmits reference signals from multiple antenna ports, a receiver can measure the phase of each received reference signal. The relative phase between these measurements — the RSARP — reveals how the antenna array's signals combine at the receiver. This information is used by the network to calibrate antenna arrays, verify beamforming weights, and support advanced transmission schemes such as coordinated multipoint (CoMP) and massive MIMO.

In the context of positioning, RSARP is particularly relevant because phase measurements across antennas can be used to derive angle-of-arrival and angle-of-departure information, complementing timing-based measurements like OTDOA and RSTD. The relative phase between reference signals from different antennas enables the receiver to estimate the direction from which signals arrive, which is a key enabler for high-accuracy positioning in both LTE and NR. Specifications 36.509 and 36.978 address conformance testing and radio frequency requirements related to these measurements.

Architecturally, RSARP sits at the intersection of the physical layer reference signal design and the radio frequency conformance framework. It is not a standalone protocol entity but rather a measurement concept that informs how reference signals are generated, transmitted, and evaluated. The antenna relative phase depends on factors including array element spacing, calibration accuracy, phase noise, and the propagation channel. Network equipment vendors must ensure that the relative phase across antenna branches remains within specified tolerances so that beamforming gains and positioning accuracy are not degraded.

RSARP continues to be relevant through Release 18 as multi-antenna technology has evolved from basic MIMO toward massive MIMO and advanced beamforming in 5G NR. While the term itself is primarily associated with LTE-era specifications, the underlying principle of antenna relative phase measurement remains fundamental to modern antenna calibration, beam management, and positioning enhancements in subsequent releases.

Purpose & Motivation

RSARP exists to provide a precise, standardized way to describe and measure the phase relationship between reference signals transmitted from different antennas. In early MIMO systems, antenna calibration and beamforming verification lacked a formalized metric for expressing inter-antenna phase coherence. Without such a concept, it was difficult to specify conformance requirements for multi-antenna transmission, verify that beamforming weights were correctly applied, and support phase-based positioning techniques.

The introduction of RSARP in Release 13 addressed the growing complexity of multi-antenna deployments, where accurate phase relationships across antenna branches directly affect beamforming gain, spatial multiplexing performance, and positioning accuracy. It provided a common vocabulary for equipment vendors, test houses, and network operators to assess antenna array behavior.

By formalizing antenna relative phase, RSARP also supported the evolution toward advanced positioning methods that rely on angle information rather than timing alone. This became increasingly important as regulatory requirements for emergency positioning accuracy tightened and as new use cases demanded higher precision location information.

What changed in its specifications

The latest release-to-release comparison of specifications that define RSARP. Each summary describes the whole specification, not only this term.

TS 36.509Rel-12 → Rel-13

Added UE test loop mode F for counting received MBMS packets on SC-MTCH in SC-PTM. Added handling of stored MBS positioning information reset and new positioning technology identifiers.

Full comparison in TS 36.509 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-13 Initial

Initial introduction of RSARP as a concept for characterizing relative phase between reference signals from different antennas, supporting multi-antenna calibration and positioning enhancements.

Carried over unchanged; the definition text remained the same while 5G NR introduced new reference signal designs that build on the same relative-phase principles.

Carried over unchanged; the term retained its Release 13 definition while NR positioning work expanded the use of phase-based measurements.

Carried over unchanged; the definition remained stable as NR positioning and multi-antenna features continued to mature.

Carried over unchanged; the term persisted with its original definition through Release 18.

Defining Specifications

3GPP specifications that define or reference RSARP, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.509 vi00 UE Conformance Test Loop Functions Rel-18 read
TS 36.978 vd20 LTE MIMO OTA Antenna Test Function Rel-13 read