Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Shared NG-RAN

Shared Next Generation Radio Access Network

Radio Access Network →

Shared NG-RAN is a 5G radio access network deployment whose infrastructure is shared among multiple operators, enabling cost-efficient rural, indoor, and neutral-host rollout while preserving per-operator service differentiation.

Introduced
Rel-15
Where
Services
Specifications
3 specs
Shared NG-RAN Description Purpose What changed Neighbours Specifications

Description

Shared NG-RAN refers to a Next Generation Radio Access Network (the 5G RAN comprising gNBs and ng-eNBs connected to the 5G Core via the NG interface) that is shared among a number of operators. Rather than each mobile network operator (MNO) deploying its own dedicated base stations, antennas, and backhaul, a shared NG-RAN allows two or more operators to use common radio access infrastructure while each retains its own core network, subscriber base, and service portfolio. This is a specific 5G-era instance of the broader Shared RAN concept, and it is defined and scoped in 3GPP specifications such as TS 22.101 (Service aspects; Service principles), TS 22.261 (Service requirements for the 5G system), and TS 22.851 (Study on enhanced network sharing for 5G).

Architecturally, a Shared NG-RAN can be realized in several ways. In a Multi-Operator Core Network (MOCN) configuration, a single shared gNB broadcasts multiple PLMN identities (one per participating operator) and connects to each operator's 5G Core (5GC) over separate NG-C and NG-U interfaces. The UE selects its home PLMN, and the shared gNB routes signalling and user plane traffic to the correct core network based on the selected PLMN. In a Gateway Core Network (GWCN) configuration, the shared RAN connects to a shared core network element (such as a shared AMF or a gateway) that in turn serves multiple operators. A third model is the neutral host, where an infrastructure provider that is not itself an MNO builds and operates the NG-RAN and leases capacity to one or more MNOs.

The gNB is the central node of the NG-RAN. In a shared deployment, the gNB must support multiple PLMN IDs, per-PLMN cell configuration, and per-PLMN resource partitioning. 3GPP defines mechanisms for the shared gNB to advertise the available PLMNs in system information (SIB1), to apply cell selection and reselection rules per PLMN, and to enforce operator-specific admission control, QoS, and mobility policies. Network slicing further complicates sharing: a single shared NG-RAN may host slices belonging to different operators, and the RAN must map each slice to the correct S-NSSAI and enforce slice-specific resource isolation.

Enhanced network sharing for 5G, studied in TS 22.851, addresses the limitations of earlier sharing models when applied to 5G. It introduces requirements for sharing of 5G-specific capabilities such as network slicing, edge computing, and QoS flows, and it clarifies how shared NG-RAN should support per-operator slice management, per-operator performance assurance, and multi-operator RAN sharing with differentiated service levels. The study also considers sharing between public and non-public networks (NPNs) and the role of shared infrastructure in enabling cost-effective 5G coverage.

Operationally, Shared NG-RAN is a key enabler for rural coverage, indoor and venue deployments, and neutral-host models where building a dedicated RAN per operator is economically unviable. It reduces capital and operational expenditure (CAPEX/OPEX) through site, power, and backhaul sharing, shortens time-to-market for new entrants, and supports regulatory objectives around coverage and competition. At the same time, it raises challenges in security isolation, performance assurance, fault management, and regulatory compliance, which 3GPP addresses through per-PLMN and per-slice management functions.

Purpose & Motivation

Shared NG-RAN exists to make 5G deployment economically viable in scenarios where a single operator cannot justify the cost of dedicated radio infrastructure. Building a full NG-RAN — sites, antennas, power, backhaul, and gNB equipment — is expensive, and in rural areas, indoor venues, tunnels, and neutral-host buildings the return on investment for a single operator is often negative. Sharing allows multiple operators to amortize these costs while each continues to compete on services, pricing, and core network capabilities.

Historically, network sharing began with 2G and 3G through the Shared RAN concept (GERAN, UTRAN, E-UTRAN), using MOCN and GWCN architectures. When 5G arrived, the existing sharing framework had to be extended because 5G introduced new dimensions: network slicing, service-based architecture in the core, edge computing, and much higher cell density. The earlier definitions did not adequately address how a shared RAN should handle per-operator slices, differentiated QoS, or non-public networks. TS 22.851 was created to study and specify enhanced network sharing requirements for 5G, and Shared NG-RAN became the term that captures the 5G-specific shared RAN entity.

The concept also supports regulatory and policy goals. Regulators in many markets encourage or mandate passive and active sharing to accelerate coverage, reduce environmental impact, and lower barriers to entry for new operators. Shared NG-RAN provides a standards-based way to implement these objectives while preserving competition at the service layer.

What changed in its specifications

The latest release-to-release comparison of specifications that define Shared NG-RAN. Each summary describes the whole specification, not only this term.

TS 22.101Rel-16 → Rel-17

Rel-17 added support for Multi-USIM devices, emergency call handling, and definitions for MUSIM UEs.

Full comparison in TS 22.101 →
TS 22.261Rel-18 → Rel-19

Rel-19 adds to TS 22.261 Indirect Network Sharing, 5G satellite access Phase 3 requirements, a 5G wireless sensing service clause, signalling traffic monitoring, SNPN interconnection clauses, and Localized Mobile Metaverse Services. It also extends disaster roaming to 5G-only UEs and adds Ambient IoT device clauses.

Full comparison in TS 22.261 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-15 Initial

Introduced the term Shared NG-RAN as part of the 5G system specifications, defining it as an NG-RAN shared among a number of operators. This established the 5G-specific sharing entity alongside the existing Shared RAN concept, aligned with the first full set of 5G NR and 5GC specifications.

The definition carried over unchanged. Rel-16 work on enhanced network sharing and 5G service requirements continued to reference the same concept without altering the wording.

The definition remained unchanged. Rel-18 context includes continued refinement of network sharing requirements in TS 22.261 and TS 22.851, but the core definition of Shared NG-RAN was not revised.

The definition carried over unchanged from previous releases, with no textual revision to the term itself.

The definition remained unchanged, continuing to describe an NG-RAN shared among a number of operators.

Defining Specifications

3GPP specifications that define or reference Shared NG-RAN, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 22.101 vl00 3GPP Service Principles for PLMNs Rel-21 read
TS 22.261 vk81 5G Service and Operational Requirements Rel-20 read
TR 22.851 vj10 Feasibility Study on Network Sharing Aspect Rel-19 read