Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Split SRB

Split Signalling Radio Bearer

Radio Access Network →

Split SRB is a signalling radio bearer that supports transmission via MCG and SCG as well as duplication of RRC PDUs in MR-DC, or transmission via direct and indirect paths as well as duplication of PDCP PDUs in MP.

Introduced
Rel-15
Where
Radio Access Network › NG-RAN (5G)
Specifications
3 specs
Split SRB Description Purpose What changed Neighbours Detected Changes Specifications

Description

The Split Signalling Radio Bearer (Split SRB) is a control plane enhancement introduced in 3GPP Release 15 for Multi-RAT Dual Connectivity (MR-DC) and later extended to Multi-Path (MP) scenarios. It allows signalling radio bearer (SRB) messages, which carry Radio Resource Control (RRC) signalling, to be transmitted over both the Master Cell Group (MCG) and Secondary Cell Group (SCG) paths, or over direct and indirect paths in MP. This is achieved by duplicating RRC PDUs at the PDCP layer and routing them through both paths, thereby improving reliability and reducing latency for control plane signalling. The Split SRB is defined in 3GPP TS 37.340 for MR-DC and TS 38.331 for NR RRC, with the PDCP duplication functionality specified in TS 38.323.

In MR-DC, the Split SRB is an SRB between the Master Node (MN) and the UE that can be configured to use either the direct path (via the MN's MCG) or the indirect path (via the Secondary Node's SCG), or both simultaneously with duplication. The PDCP entity for the Split SRB is located in the MN, and it duplicates the RRC PDUs, sending one copy to the MN's RLC entity and another to the SN's RLC entity via the Xn interface. The UE's PDCP layer receives both copies and performs duplicate detection and discarding, ensuring that only one copy is delivered to the RRC layer. This duplication enhances the reliability of RRC signalling, which is critical for connection establishment, reconfiguration, and mobility procedures. The Split SRB is particularly beneficial in scenarios with unreliable backhaul or when the UE is at the cell edge, where a single path may be prone to failure.

The Split SRB was first introduced in Release 15 for MR-DC, specifically for EN-DC (E-UTRA-NR Dual Connectivity) and NE-DC (NR-E-UTRA Dual Connectivity). In these scenarios, the MN can be an LTE eNB or an NR gNB, and the SN can be the other. The Split SRB allows the MN to send RRC messages to the UE via both the LTE and NR legs, improving robustness. The initial definition in Rel-15 described it as an SRB between the MN and the UE, allowing selection of either the direct path or the path via the SN, as well as duplication of RRC PDUs across both paths. This definition remained unchanged through Rel-16 and Rel-17.

In Release 18, the definition was revised to explicitly include Multi-Path (MP) scenarios, where the Split SRB supports transmission via direct and indirect paths, as well as duplication of PDCP PDUs. This change reflects the evolution of 3GPP architectures towards multi-path connectivity, including scenarios like NR-DC and potentially non-3GPP access. The updated definition also aligns the terminology with the broader concept of PDCP duplication, which is not limited to RRC PDUs but can apply to any PDCP PDU. The Split SRB thus becomes a more general mechanism for reliable control plane signalling in multi-connectivity environments.

The Split SRB operates in conjunction with the split bearer for user plane, and both rely on the PDCP duplication framework. The duplication can be activated or deactivated based on network configuration, and it can be dynamically controlled to balance reliability and resource efficiency. The UE's PDCP layer must support duplicate detection and reordering to handle the multiple copies. The Split SRB is a key feature for ensuring robust control plane connectivity in dual connectivity and multi-path scenarios, which is essential for maintaining service continuity and enabling advanced features like ultra-reliable low-latency communication (URLLC).

Purpose & Motivation

The Split SRB was created to enhance the reliability and robustness of control plane signalling in dual connectivity and multi-path scenarios. In traditional single-connectivity, the SRB is transmitted over a single radio link, which can be vulnerable to radio link failures, especially at cell edges or in high-mobility scenarios. With the advent of dual connectivity, it became possible to utilize multiple paths for signalling, but a mechanism was needed to duplicate and coordinate the transmission of RRC messages across these paths. The Split SRB solves this by allowing the duplication of RRC PDUs at the PDCP layer, ensuring that critical signalling messages reach the UE even if one path experiences degradation.

Prior to Release 15, control plane signalling in dual connectivity was limited to the MCG, meaning that the SRB was only transmitted via the MeNB or MN. This provided no redundancy and could lead to connection failures if the link to the MN was lost. The Split SRB addresses this limitation by enabling the use of both MCG and SCG paths, thereby improving reliability and reducing latency. It also supports load balancing of signalling traffic and can be particularly beneficial for URLLC services that require high reliability and low latency.

The evolution of the Split SRB to include Multi-Path scenarios in Release 18 reflects the growing importance of multi-connectivity in 5G and beyond. As networks become more heterogeneous and diverse, the ability to reliably deliver control plane messages across multiple paths is crucial for maintaining service continuity and enabling advanced use cases. The Split SRB thus represents a key enabler for robust and resilient 5G networks.

What changed in its specifications

The latest release-to-release comparison of specifications that define Split SRB. Each summary describes the whole specification, not only this term.

TS 36.331Rel-18 → Rel-19

Rel-19 adds NTN-for-IoT Phase 3 and inter-RAT mobility from E-UTRAN to NR NTN, plus LTE-based 5G Broadcast Phase 2 changes. It also adds IMS disaster-roaming access barring, NTN-for-NR Phase 3 fields, and NR RRM Phase 5 items.

Full comparison in TS 36.331 →
TS 37.340Rel-18 → Rel-19

Rel-19 adds to TS 37.340 data collection for SON/MDT in NR standalone and MR-DC Phase 4. It covers conditional PSCell addition or change (CPAC/S-CPAC) failure detection and root cause analysis in MN and SN nodes.

Full comparison in TS 37.340 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (2 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-15 2 changes
  • Split SRB UL configuration TS 37.340CR0067
  • Correction on the configuration of split SRB TS 38.331CR1375

Defining Specifications

3GPP specifications that define or reference Split SRB, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.331 vj40 E-UTRA Radio Resource Control (RRC) Protocol Rel-19 read
TS 37.340 vj30 Overview of Multi-Connectivity Operation using E-UTRA and NR Rel-19 read
TS 38.331 vj40 NR Radio Resource Control (RRC) Rel-19 read