Description
In 3GPP specifications, a square filter refers to an ideal filter with a perfectly rectangular frequency response, meaning it passes all frequencies within a given bandwidth with unity gain and completely attenuates all frequencies outside that bandwidth. This filter is not physically realizable but serves as a mathematical reference for integrating signal power over a specific channel bandwidth. It is used in the context of radio frequency (RF) measurements and performance testing to define the ideal integration boundaries for power measurement. The square filter is defined in specifications such as 37.105, 37.145, 38.104, and 38.141, which cover RF requirements for base stations and user equipment. The concept is fundamental to the definition of channel bandwidth and the measurement of transmitted power, error vector magnitude (EVM), and adjacent channel leakage ratio (ACLR). When measuring the power of a signal within a channel, the ideal approach is to integrate the power spectral density over the channel bandwidth using a square filter. This provides a consistent and repeatable method for evaluating transmitter and receiver performance. In practice, real filters have roll-off and non-ideal characteristics, so the square filter serves as a benchmark against which real filter performance is compared. The square filter is also used in link budget calculations and interference analysis, where the ideal integration helps in determining the impact of adjacent channel interference. The square filter concept is closely related to the Nyquist filter and the root-raised cosine filter used in digital communications, but it is distinct in that it has a perfectly flat passband and infinite attenuation in the stopband. The 3GPP specifications define the square filter as a mathematical tool, not a physical device, and its use is primarily in test and measurement scenarios. The square filter is essential for ensuring that RF requirements are defined in a technology-neutral and implementation-independent manner, allowing equipment vendors to design filters that meet the specified performance while accounting for practical limitations.
Purpose & Motivation
The square filter exists to provide a mathematically ideal reference for integrating signal power over a specific channel bandwidth in 3GPP RF and performance specifications. It solves the problem of defining consistent and repeatable measurement methodologies that are independent of implementation-specific filter designs. Without a common reference, different vendors and test labs might use different filters, leading to inconsistent measurement results and difficulty in comparing equipment performance. The square filter provides a clear, unambiguous definition of channel power that can be used in conformance testing. It also simplifies the derivation of RF requirements by allowing the use of ideal integration in theoretical analyses. The concept has been used since the early days of 3GPP to define transmitter and receiver characteristics. In Rel-17, the term was explicitly defined in the context of NR (New Radio) specifications, as the introduction of wider bandwidths and higher frequency bands necessitated a clear reference for power measurement. The square filter continues to be relevant in Rel-18, Rel-19, and Rel-20 as networks evolve towards higher frequencies and more complex waveforms. The square filter addresses the limitations of earlier measurement methods that relied on specific filter implementations, which could vary and lead to disputes. By using an ideal square filter as a reference, 3GPP ensures that requirements are fair and technology-agnostic, fostering innovation and competition in the equipment market.
What changed in its specifications
The latest release-to-release comparison of specifications that define Square filter. Each summary describes the whole specification, not only this term.
Rel-19 adds sub-band full duplex base station requirements to TS 38.104, plus LP-WUS text, ATG PUSCH requirements, and the new n110 band. It also adds sub-5 MHz FR1 channel bandwidth requirements and extends wide-area BS unwanted emission limits to n68, n87, n88 and n110.
Full comparison in TS 38.104 →Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (2 CRs across 2 releases). Complements the general historical overview above with the evidence-based evolution of this function.
Studied in Rel-17, normative work from Rel-19.
Defining Specifications
3GPP specifications that define or reference Square filter, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 37.105 vj40 | AAS Base Station Radio Requirements | Rel-19 read |
| TS 37.145 vj40 | AAS Base Station Radiated Requirements | Rel-19 read |
| TS 38.104 vk10 | NR Base Station RF Requirements | Rel-20 read |
| TS 38.141 vj40 | BS Conformance Testing (TR 38.141) | Rel-19 read |