Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

SREG

Short Resource-Element Group

Physical Layer →

SREG is a physical-layer concept in 3GPP NR that groups resource elements for control-channel transmission, used to map control information to physical resources for short PDCCH and PUCCH formats.

Introduced
Rel-16
Where
Radio Access Network › NG-RAN (5G)
Specifications
2 specs
SREG Description Purpose What changed Neighbours Specifications

Description

In 3GPP New Radio (NR), the Short Resource-Element Group (SREG) is a fundamental unit used for mapping control channel information to physical resources. An SREG consists of a set of resource elements (REs) within a single physical resource block (PRB) that are used for transmitting control information. Specifically, an SREG is defined as a group of resource elements within one OFDM symbol and one PRB, excluding resource elements used for demodulation reference signals (DMRS). The concept is introduced in 3GPP TS 36.211 (for LTE) and TS 38.889 (for NR), where it is used for the physical downlink control channel (PDCCH) and physical uplink control channel (PUCCH) mapping.

The SREG is particularly relevant for short PDCCH (sPDCCH) and short PUCCH (sPUCCH) formats, which are designed for low-latency and high-reliability communications. In NR, the control resource set (CORESET) defines the frequency-domain resources for PDCCH, and within a CORESET, control channel elements (CCEs) are formed from resource element groups (REGs). The SREG is a smaller unit used for certain control channel formats, allowing more flexible and efficient resource allocation. For example, in the short PUCCH format, the SREG enables the transmission of uplink control information (UCI) in a single symbol or a few symbols, which is essential for ultra-reliable low-latency communication (URLLC) services.

The mapping of SREGs to physical resources is specified in 3GPP TS 38.211 (NR physical channels and modulation). The SREG structure allows the network to multiplex control information with data and reference signals efficiently. The use of SREGs also facilitates beamforming and spatial multiplexing, as control channels can be transmitted on specific beams. In addition, the SREG concept supports the flexible numerology of NR, where different subcarrier spacings and symbol durations are used.

Overall, the SREG is a key physical layer concept that enables efficient and reliable control channel transmission in 5G NR, particularly for low-latency and high-reliability applications. Its design reflects the need for flexible resource allocation and support for advanced antenna technologies.

Purpose & Motivation

The SREG concept was created to address the need for more flexible and efficient control channel transmission in 5G NR, especially for low-latency and high-reliability services. Traditional LTE control channels used fixed resource element groups (REGs) that were not optimized for the diverse requirements of 5G. The SREG provides a smaller granularity for control channel mapping, enabling faster processing and reduced latency.

In addition, the SREG supports the use of short PDCCH and PUCCH formats, which are essential for URLLC and other time-sensitive applications. By grouping resource elements into SREGs, the network can allocate control resources more dynamically and adapt to varying channel conditions. This also facilitates beamforming and spatial multiplexing, as SREGs can be mapped to specific beams.

The introduction of SREG in 3GPP Release 16 reflects the evolution of NR to support advanced use cases beyond mobile broadband. It solves the problem of inefficient control channel resource utilization and enables new services that require ultra-low latency and high reliability.

What changed in its specifications

The latest release-to-release comparison of specifications that define SREG. Each summary describes the whole specification, not only this term.

TS 36.211Rel-18 → Rel-19

Rel-19 adds nothing to TS 36.211 for IoT and RedCap UE. Instead, it removes clauses on narrowband PUSCH, NPDCCH formats, synchronization signals, narrowband positioning and reference signals, and OFDM and SC-FDMA baseband signal generation.

Full comparison in TS 36.211 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-16 Initial

Initial introduction of the SREG concept in 3GPP specifications for NR physical layer, defining the grouping of resource elements for short control channel formats.

The term carried over unchanged from Rel-16; no definitional changes were made to the SREG concept in this release.

The term carried over unchanged from Rel-16; no definitional changes were made to the SREG concept in this release.

Defining Specifications

3GPP specifications that define or reference SREG, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.211 vj30 E-UTRA Physical Layer Specifications Rel-19 read
TR 38.889 vg00 NR-based access to unlicensed spectrum study Rel-16 read