Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

TRP requirement

TRP requirement (Test Requirement for Transmission Reception Point / OTA BS requirements)

Physical Layer →

TRP requirement is the AAS/OTA base station test specification that mandates dual-polarized spherical measurements to verify radiated performance for beamforming equipment.

Introduced
Rel-15
Where
Radio Access Network › Multi-RAT
Specifications
3 specs
TRP requirement Description Purpose What changed Neighbours Specifications

Description

TRP requirement in 3GPP RF and performance specifications (notably TR 37.843, TR 37.941, and TS 38.817) refers to a class of base station test requirements in which the figure of merit is measured over the whole sphere around the device under test (DUT) using dual-polarized probes. The acronym here relates to Total Radiated Power (TRP) measurement methodology rather than the Transmission Reception Point, although both share the TRP abbreviation and both concern antenna arrays. The requirement defines how conformance testing is performed for Active Antenna System (AAS) base stations and, from Rel-16 onward, for OTA (over-the-air) base station requirements generally.

Traditional base station RF testing measured conducted power at antenna connectors. With AAS and massive MIMO, the antenna array is integrated with the radio and there are no accessible connectors, so performance must be verified radiated, over the air. A TRP requirement specifies that the DUT's radiated figure of merit — for example total radiated power or a related metric — is integrated over the entire sphere surrounding the device, using measurements from dual-polarized probes at many angular positions. This captures the true spatial distribution of radiated energy, including sidelobes and polarization effects that a single-direction measurement would miss.

The measurement procedure involves positioning the DUT in an anechoic chamber, sampling the radiated field at a dense grid of theta and phi angles over the full sphere, and measuring both polarizations at each point. The measured samples are then integrated to compute the total radiated quantity. Because beamforming base stations steer energy dynamically, the test must account for beam configurations; requirements specify which beams or beam sets are evaluated and how the figure of merit is aggregated. The dual-polarized requirement ensures that polarization diversity and cross-polarization discrimination are properly characterized.

TRP requirements are closely related to EIRP and TRP metrics used in UE testing, but applied to base stations. They form part of the broader OTA test framework that 3GPP developed as antenna systems became integrated and active. The specifications TR 37.843 (multi-antenna AAS BS radiated testing), TR 37.941 (RF conformance testing for AAS BS), and TS 38.817 (NR BS OTA requirements) define the test methods, tolerances, and applicability.

For engineers, TRP requirements matter because they define how radiated base station performance is proven for regulatory and conformance purposes. They determine chamber size, probe configuration, measurement time, and uncertainty budgets in OTA test labs, and they ensure that beamforming base stations are characterized in a way that reflects real spatial radiation rather than idealized conducted measurements.

Purpose & Motivation

TRP requirements were created because the traditional conducted test methodology for base stations became inapplicable with Active Antenna Systems. In earlier generations, base station RF performance was verified by measuring power at antenna connectors, which was straightforward and repeatable. When antenna arrays became integrated with radio circuitry in AAS and massive MIMO products, connectors disappeared and the only way to verify radiated performance was over the air.

A simple single-direction OTA measurement, however, is insufficient for beamforming systems: energy is distributed across many beams and directions, and polarization matters. 3GPP therefore defined requirements that integrate the figure of merit over the whole sphere using dual-polarized probes, providing a complete and fair characterization of radiated performance. This methodology supports conformance testing, type approval, and regulatory compliance for advanced antenna systems.

The requirements also enable consistent comparison between vendors and ensure that network operators can trust the declared radiated performance of base stations. As OTA testing expanded from AAS-specific requirements in Rel-15 to general OTA BS requirements in Rel-16, the TRP methodology became the foundation of 5G base station radiated conformance testing.

What changed in its specifications

The latest release-to-release comparison of specifications that define TRP requirement. Each summary describes the whole specification, not only this term.

TR 37.941Rel-15 → Rel-16

Extended OTA BS testing to 43.5–48.2 GHz; added new measurement/uncertainty clauses; revised procedures.

Full comparison in TR 37.941 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-15 Initial

Initial definition: AAS BS requirements requiring dual-polarized measurements of the figure of merit over the whole sphere around the DUT. Established the OTA radiated test methodology for active antenna systems.

The definition was revised from 'AAS BS requirements' to 'OTA BS requirements' and from 'around the DUT' to 'around the BS', reflecting the generalization of the methodology from AAS-specific testing to general over-the-air base station requirements.

Definition carried over unchanged from Rel-16; the OTA BS requirement framework remained stable.

Definition carried over unchanged.

Definition carried over unchanged; the OTA BS requirement wording from Rel-16 was retained.

Defining Specifications

3GPP specifications that define or reference TRP requirement, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 37.843 vf70 AAS BS Radiated RF Requirement Background Rel-15 read
TR 37.941 vj20 RF Conformance Testing Background for Radiated BS Requirements Rel-19 read
TS 38.817 3GPP TR 38.817 Rel-15 read